[U-Boot] [PATCH 5/9] serial_mxc: add support for MX51 processor

[Stefano Babic]

The patch adds support for the Freescale mx51 processor.

Signed-off-by: Stefano Babic <sbabic at denx.de>
Signed-off-by: Fred Fan fanyefeng at gmail.com
---
 drivers/serial/serial_mxc.c |   12 +++++++++++-
 1 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index acc5b7d..e34733b 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -20,6 +20,8 @@
 #include <common.h>
 #ifdef CONFIG_MX31
 #include <asm/arch/mx31.h>
+#elif defined(CONFIG_MX51)
+#include <asm/arch/imx-regs.h>
 #else
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
@@ -49,8 +51,14 @@
 #define UART_PHYS 0x1001b000
 #elif defined(CONFIG_SYS_MX27_UART6)
 #define UART_PHYS 0x1001c000
+#elif defined(CONFIG_SYS_MX51_UART1)
+#define UART_PHYS UART1_BASE_ADDR
+#elif defined(CONFIG_SYS_MX51_UART2)
+#define UART_PHYS UART2_BASE_ADDR
+#elif defined(CONFIG_SYS_MX51_UART3)
+#define UART_PHYS UART3_BASE_ADDR
 #else
-#error "define CONFIG_SYS_MX31_UARTx to use the mx31 UART driver"
+#error "define CONFIG_SYS_MXxx_UARTx to use the mxxx UART driver"
 #endif
 
 /* Register definitions */
@@ -168,6 +176,8 @@ void serial_setbrg (void)
 {
 #ifdef CONFIG_MX31
 	u32 clk = mx31_get_ipg_clk();
+#elif defined(CONFIG_MX51)
+	u32 clk = mxc_get_clock(MXC_UART_CLK);
 #else
 	u32 clk = imx_get_perclk1();
 #endif
-- 
1.6.3.3