[U-Boot] u-boot ml510 xilinx

[Michal Simek]

Wilson Martins wrote:
> I have a problem on the utilization of u-boot with the card Xilinx ml510.
> u-boot I did the download in the Xilinx git then I make the copy do
> xparamenters.h file in the XPS project directory in the directory
> board/xilinx/ml507 u-boot, following orders I've been doing:
> 
> make clean
> make make ml507_config
> make
> 
> The following errors appear:
> 
> /home/pi16/Téléchargements/u-boot-xlnx.git/include/configs/ml507.h:215:1:
> warning: this is the location of the previous definition
> board.c: In function 'board_init_r':
> board.c:789: error: 'XPAR_FLASH_MEM0_BASEADDR' undeclared (first use in this
> function)
> board.c:789: error: (Each undeclared identifier is reported only once
> board.c:789: error: for each function it appears in.)
> board.c:888: warning: implicit declaration of function 'board_get_enetaddr'
> make[1]: *** [board.o] Erreur 1
> make[1]: quittant le répertoire «
> /home/pi16/Téléchargements/u-boot-xlnx.git/lib_ppc »
> make: *** [lib_ppc/libppc.a] Erreur 2
> 
> 
> Can somebody help me?
> there is some version of u-boot with the card Xilinx ml510?
> 

Look at board/xilinx/ml507 - there is xpamaters.h which should be 
replaced by your version.
If you don't flash then look at include/configs/ml507.h and disable 
flash. Look at xilinx-ppc.h and others files.

You can look at microblaze-generic.h where you can see which options
are used for system with/without flash.

Regards,
Michal


> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian