[U-Boot] OMAP3 EVM board nand support missed

[Hiremath, Vaibhav]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
> bounces at lists.denx.de] On Behalf Of Arno Steffen
> Sent: Monday, January 18, 2010 5:19 PM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] OMAP3 EVM board nand support missed
> 
> Testing the latest release (2009-08) I missed the NAND support
> (there
> is just ONENAND).
[Hiremath, Vaibhav] latest stable u-boot version is 2009-11.
> Adding the line in config
> #define CONFIG_CMD_NAND		/* NAND support		*/
> cause a error in building uboot:
> ...drivers/mtd/nand/libnand.a(nand.o): In function `nand_init_chip':
> /opt/src/ub/u-boot-ti-git-2009-08/drivers/mtd/nand/nand.c:53:
> undefined reference to `board_nand_init'
> make: *** [u-boot] Fehler 1
> 
[Hiremath, Vaibhav] There are some more definitions you must add to your header file to build NAND support. please refer to the patch,


http://www.mail-archive.com/u-boot@lists.denx.de/msg25521.html

Thanks,
Vaibhav


> Is this intentionally not supported anymore? What's to do to get
> nand
> support for my board?
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot