[PATCH] OMAP3 Beagle Update revision detection

[Syed Mohammed Khasim]

New BeagleBoard revision C4 uses a new ID. Update revision detection.

Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
Signed-off-by: Syed Mohammed Khasim <khasim at ti.com>
---
 board/ti/beagle/beagle.c |   64 ++++++++++++++++++++++++++++-----------------
 board/ti/beagle/beagle.h |    8 ++++-
 2 files changed, 46 insertions(+), 26 deletions(-)

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 3b4c9e7..23985ea 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -38,7 +38,7 @@
 #include <asm/mach-types.h>
 #include "beagle.h"

-static int beagle_revision_c;
+static int beagle_revision;

 /*
  * Routine: board_init
@@ -60,41 +60,57 @@ int board_init(void)
 /*
  * Routine: beagle_get_revision
  * Description: Return the revision of the BeagleBoard this code is running on.
- *              If it is a revision Ax/Bx board, this function returns 0,
- *              on a revision C board you will get a 1.
  */
 int beagle_get_revision(void)
 {
-	return beagle_revision_c;
+	return beagle_revision;
 }

 /*
  * Routine: beagle_identify
- * Description: Detect if we are running on a Beagle revision Ax/Bx or
- *              Cx. This can be done by GPIO_171. If this is low, we are
- *              running on a revision C board.
+ * Description: Detect if we are running on a Beagle revision Ax/Bx,
+ *		C1/2/3, C4 or D. This can be done by reading
+ *		the level of GPIO173, GPIO172 and GPIO171. This should
+ *		result in
+ *		GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
+ *		GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
+ *		GPIO173, GPIO172, GPIO171: 1 0 1 => C4
+ *		GPIO173, GPIO172, GPIO171: 0 0 0 => D
  */
 void beagle_identify(void)
 {
-	beagle_revision_c = 0;
-	if (!omap_request_gpio(171)) {
-		unsigned int val;
-
-		omap_set_gpio_direction(171, 1);
-		val = omap_get_gpio_datain(171);
-		omap_free_gpio(171);
-
-		if (val)
-			beagle_revision_c = 0;
-		else
-			beagle_revision_c = 1;
-	}
+	omap_request_gpio(171);
+	omap_request_gpio(172);
+	omap_request_gpio(173);
+	omap_set_gpio_direction(171, 1);
+	omap_set_gpio_direction(172, 1);
+	omap_set_gpio_direction(173, 1);
+
+	beagle_revision = omap_get_gpio_datain(173) << 2 |
+			  omap_get_gpio_datain(172) << 1 |
+			  omap_get_gpio_datain(171);
+	omap_free_gpio(171);
+	omap_free_gpio(172);
+	omap_free_gpio(173);

 	printf("Board revision ");
-	if (beagle_revision_c)
-		printf("C\n");
-	else
+
+	switch (beagle_revision) {
+	case REVISION_AXBX:
 		printf("Ax/Bx\n");
+		break;
+	case REVISION_CX:
+		printf("C1/C2/C3\n");
+		break;
+	case REVISION_C4:
+		printf("C4\n");
+		break;
+	case REVISION_D:
+		printf("D\n");
+		break;
+	default:
+		printf("unknown 0x%02x\n", beagle_revision);
+	}
 }

 /*
@@ -137,7 +153,7 @@ void set_muxconf_regs(void)
 {
 	MUX_BEAGLE();

-	if (beagle_revision_c) {
+	if (beagle_revision != REVISION_AXBX) {
 		MUX_BEAGLE_C();
 	}
 }
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index 7fe6275..d1d5d27 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -33,7 +33,11 @@ const omap3_sysinfo sysinfo = {
 #endif
 };

-#define BOARD_REVISION_MASK	(0x1 << 11)
+/* BeagleBoard revisions */
+#define REVISION_AXBX	0x7
+#define REVISION_CX	0x6
+#define REVISION_C4	0x5
+#define REVISION_D	0x0

 /*
  * IEN  - Input Enable
@@ -264,7 +268,7 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
 	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_171*/\
 	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTU | EN  | M4)) /*GPIO_172*/\
-	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOMI*/\
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTU | EN  | M4)) /*GPIO_173*/\
 	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
 	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
 	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
-- 
1.5.6.3