[U-Boot] [PATCH] NET: kirkwood-egiga smi access fix

Prafulla Wadaskar prafulla at marvell.com
Tue Jan 19 12:47:42 CET 2010


 

> -----Original Message-----
> From: Siddarth Gore [mailto:gores at marvell.com] 
> Sent: Tuesday, January 19, 2010 11:09 AM
> To: u-boot at lists.denx.de
> Cc: Prafulla Wadaskar; Siddarth Gore
> Subject: [PATCH] NET: kirkwood-egiga smi access fix
> 
> Although the datasheet mentions seperate smi registers for 
> each port, using Port 1 smi register to access ethernet phys 
> does not work. Hence only Port 0 smi register should be used 
> to access all devices connected to the smi bus. This behavior 
> is consistant with the mv643xx driver in the linux kernel.
> 
> Signed-off-by: Siddarth Gore <gores at marvell.com>
> Acked-by: Prafulla Wadaskar <prafulla at marvell.com>

Ack
I have tested this

Regards..
Prafulla . .


More information about the U-Boot mailing list