[U-Boot] [U-BOOT] Ethernet problem on PXA320

[Ben Warren]

Dennis,

Dennis Semakin wrote:
> Hello all
>
> As I already wrote, I'm trying to fix issue with my ethernet on Colibri PXA320 board.
> I know, u-boot supports this board. But network on my board doesn't work.
> First, does anyone know where did developers get CONFIG_DRIVER_NE2000_BASE value from?
> I mean, now it's #define CONFIG_DRIVER_NE2000_BASE 0x10000000. 
> Where did they get this 0x10000000 address? When I run any eth command, e.g. ping, system halted.
>
> Recently, I wrote to the ASIX support, and they send me a driver source file for ax88796b ethernet controller.
> Base address was 0x08000000 there. But now system doesn't halt.
>
> Q: Is the problem in these addresses?
>
>   
The NE2000 is a memory-mapped device.  The BASE address is the address 
where the chip sits in your board's memory map.  You need to know your 
board's memory map to meaningfully debug this problem.
> Thanks
> Best regards
> Dennis Semakin
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>   
regards,
Ben