[U-Boot] [PATCH-V2 1/9] mxc_serial replace platform specific clock

[John Rigby]

remove ifdef'd clock selection code from
serial_mxc.c and replace with call to imx_get_uartclk

Add definitions for imx_get_uartclk to imx31 and imx27
include files.

This makes it easier to add new imx platforms.

Signed-off-by: John Rigby <jcrigby at gmail.com>
---
 drivers/serial/serial_mxc.c       |    6 +-----
 include/asm-arm/arch-mx27/clock.h |    2 ++
 include/asm-arm/arch-mx31/mx31.h  |    1 +
 3 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index acc5b7d..7dcedf6 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -166,11 +166,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void serial_setbrg (void)
 {
-#ifdef CONFIG_MX31
-	u32 clk = mx31_get_ipg_clk();
-#else
-	u32 clk = imx_get_perclk1();
-#endif
+	u32 clk = imx_get_uartclk();
 
 	if (!gd->baudrate)
 		gd->baudrate = CONFIG_BAUDRATE;
diff --git a/include/asm-arm/arch-mx27/clock.h b/include/asm-arm/arch-mx27/clock.h
index 5fc75c5..472e8f2 100644
--- a/include/asm-arm/arch-mx27/clock.h
+++ b/include/asm-arm/arch-mx27/clock.h
@@ -36,4 +36,6 @@ ulong imx_get_perclk2(void);
 ulong imx_get_perclk3(void);
 ulong imx_get_ahbclk(void);
 
+#define imx_get_uartclk imx_get_perclk1
+
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
index 53b9f27..3cc4b35 100644
--- a/include/asm-arm/arch-mx31/mx31.h
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -25,6 +25,7 @@
 #define __ASM_ARCH_MX31_H
 
 extern u32 mx31_get_ipg_clk(void);
+#define imx_get_uartclk mx31_get_ipg_clk
 extern void mx31_gpio_mux(unsigned long mode);
 
 enum mx31_gpio_direction {
-- 
1.6.4.2.236.gf324c