[U-Boot] ppc440epx(sequoia) USB ehci fix.

[Chris Zhang]

Hi,
This patch makes sequoia board USB ehci working.

The problem seems to be when doing port reset (see ehci-hcd.c), the reset
is not terminated. EHCI spec says "A host controller must terminate the
reset and stabilize the state of the port within 2 milliseconds".

This is only tested on Sequoia board (with USB mass storage devices).

cheers,
Chris Zhang

diff --git a/drivers/usb/host/ehci-ppc4xx.c
b/drivers/usb/host/ehci-ppc4xx.c
new file mode 100644
index 0000000..9a23509
--- /dev/null
+++ b/drivers/usb/host/ehci-ppc4xx.c
@@ -0,0 +1,29 @@
+/* Code derived from ehci-fsl.c */
+
+#include <common.h>
+#include <usb.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+       hccr = (struct ehci_hccr *)(0xe0000300);
+       hcor = (struct ehci_hcor *)((uint32_t) hccr +
+               HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+       usb_dev_init();
+       return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+       return 0;
+}
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 940d4a8..255679a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 # echi
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
 COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
+COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ba85991..fabd68a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -708,6 +708,9 @@ ehci_submit_root(struct usb_device *dev, unsigned long
pipe,
 void *buffer,
                                 * root
                                 */
                                wait_ms(50);
+                               /* clear port reset */
+                               ehci_writel(status_reg, reg &
~EHCI_PS_PR);
+                               wait_ms(2);
                                portreset |= 1 << le16_to_cpu(req->index);
                        }
                        break;
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 5788d58..e31e3f3 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -282,8 +282,8 @@

 /* USB */
 #ifdef CONFIG_440EPX
+#if 0  /* Enable this for OHCI */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER

 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
@@ -291,7 +291,16 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  CONFIG_SYS_USB_HOST
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "ppc440"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#else  /* EHCI */
+
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PPC4XX
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#endif

+#define CONFIG_USB_STORAGE
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE

@@ -500,4 +509,10 @@
 #define CONFIG_CMD_BMP
 #endif

+/*
+ * Enable this only when you want EHCI.
+ */
+#if 1
+#endif
+
 #endif /* __CONFIG_H */