[U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures

Jens Scharsig js_at_ng at scharsoft.de
Sat Jan 16 21:28:32 CET 2010


* prepare board config files for Soc access update

Signed-off-by: Jens Scharsig <js_at_ng at scharsoft.de>
---
 include/configs/afeb9260.h         |    4 ++
 include/configs/at91cap9adk.h      |    4 ++
 include/configs/at91rm9200dk.h     |   13 ++++-
 include/configs/at91rm9200ek.h     |   11 ++++-
 include/configs/at91sam9260ek.h    |    5 ++
 include/configs/at91sam9261ek.h    |    5 ++
 include/configs/at91sam9263ek.h    |   83 ++++++++++++++++++------------------
 include/configs/at91sam9m10g45ek.h |    6 +++
 include/configs/at91sam9rlek.h     |    5 ++
 include/configs/cmc_pu2.h          |   10 ++++-
 include/configs/cpu9260.h          |    4 ++
 include/configs/cpuat91.h          |    2 +
 include/configs/csb637.h           |   10 ++++-
 include/configs/kb9202.h           |   10 ++++-
 include/configs/m501sk.h           |   11 ++++-
 include/configs/meesc.h            |    5 ++
 include/configs/mp2usb.h           |   10 ++++-
 include/configs/pm9261.h           |    7 +++
 include/configs/pm9263.h           |    5 ++
 include/configs/sbc35_a9g20.h      |    4 ++
 include/configs/tny_a9260.h        |    4 ++
 21 files changed, 166 insertions(+), 52 deletions(-)

diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 58b8c8c..ddd5f52 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -45,6 +47,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -107,6 +110,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 322718f..7679a09 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -47,6 +49,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -131,6 +134,7 @@
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 590c69a..7480e25 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -25,6 +25,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
@@ -113,8 +115,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 
-#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM 0x20000000
 #define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
@@ -122,7 +122,14 @@
 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
+
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index b4f075e..5b4175f 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 /*
  * from 18.432 MHz crystal
@@ -135,7 +137,6 @@
 #undef CONFIG_CMD_MISC
 #undef CONFIG_CMD_LOADS
 
-#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
 /* Options for MMC/SD Card */
 #define CONFIG_DOS_PARTITION	1
 #undef CONFIG_MMC
@@ -145,7 +146,13 @@
 /*
  * Network Driver Setting
  */
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 0509011..4c3b0a2 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -52,6 +54,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -123,6 +127,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index fbf7389..066f256 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -50,6 +52,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -133,6 +137,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 571351c..68e8310 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -49,6 +49,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -69,9 +71,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PB7	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PC29	/* this is the user2 led */
+#define	CONFIG_RED_LED		AT91_PORTPIN(B, 7)	/* the power led */
+#define	CONFIG_GREEN_LED	AT91_PORTPIN(B, 8)	/* the user1 led */
+#define	CONFIG_YELLOW_LED	AT91_PORTPIN(C, 29)	/* the user2 led */
 
 #define CONFIG_BOOTDELAY	3
 
@@ -147,39 +149,36 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define MASTER_PLL_MUL		171
 #define MASTER_PLL_DIV		14
+#define MASTER_PLL_OUT		3
 
 /* clocks */
 #define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
-		 (2 << 28) |		/* PLL Clock Frequency Range */	\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+		(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
+#define CONFIG_SYS_PLLAR_VAL					\
+	(AT91_PMC_PLLAR_29 |					\
+	AT91_PMC_PLLxR_OUT(MASTER_PLL_OUT) |			\
+	AT91_PMC_PLLxR_PLLCOUNT(63) |				\
+	AT91_PMC_PLLxR_MUL(MASTER_PLL_MUL - 1) | 		\
+	AT91_PMC_PLLxR_DIV(MASTER_PLL_DIV))
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+	(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 |	\
+	 AT91_PMC_MCKR_MDIV_2)
+
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+	(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | 	\
+	AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
 /* no pull-up for D[31:16] */
 #define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
+#define CONFIG_SYS_MATRIX_EBICSA_VAL					\
+	(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V |	\
+	 AT91_MATRIX_CSA_EBI_CS1A)
 
 /* SDRAM */
 /* SDRAMC_MR Mode register */
@@ -221,33 +220,32 @@
 #define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
 
 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC0_SETUP0_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC0_PULSE0_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_SETUP0_VAL				\
+	(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |	\
+	 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL				\
+	(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |	\
+	 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+	(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
 #define CONFIG_SYS_SMC0_MODE0_VAL				\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
+	(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |		\
+	 AT91_SMC_MODE_DBW_16 |					\
+	 AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
 
 /* user reset enable */
 #define CONFIG_SYS_RSTC_RMR_VAL			\
 		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
+		AT91_RSTC_MR_URSTEN |		\
+		AT91_RSTC_MR_ERSTL(15))
 
 /* Disable Watchdog */
 #define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
+		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
+		 AT91_WDT_MR_WDV(0xfff) |			\
+		 AT91_WDT_MR_WDDIS |				\
+		 AT91_WDT_MR_WDD(0xfff))
+
 #endif
 
 #else
@@ -264,9 +262,10 @@
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PORTPIN(D, 15)
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PORTPIN(A, 22)
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 06184e7..cc1bf9a 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* from 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -50,6 +52,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -118,6 +122,7 @@
 /* NOR flash, if populated */
 #ifndef CONFIG_CMD_NAND
 #define CONFIG_SYS_NO_FLASH		1
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #else
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
@@ -141,6 +146,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 6fad75d..62e760f 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -47,6 +49,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -119,6 +123,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PB6
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD17
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet - not present */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index be478b2..ffe83f0 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -25,6 +25,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
@@ -152,7 +154,13 @@
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 4ef8566..50e31ff 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -31,6 +31,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #define CONFIG_DISPLAY_CPUINFO	1
 
 #define AT91_MAIN_CLOCK		18432000
@@ -242,6 +244,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 8746f70..9f0ac03 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #ifdef CONFIG_CPUAT91_RAM
 #define CONFIG_SKIP_LOWLEVEL_INIT	1
 #define CONFIG_SKIP_RELOCATE_UBOOT	1
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index f4fd808..efa2780 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	184320000	/* from 3.6864 MHz crystal (3686400 * 50) */
 #define AT91C_MASTER_CLOCK	46080000	/* (AT91C_MAIN_CLOCK/4)	peripheral clock */
@@ -126,7 +128,13 @@
 #define CONFIG_SYS_ALT_MEMTEST			1
 #define CONFIG_SYS_MEMTEST_SCRATCH		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #undef CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index 7dd81e6..41ec1d5 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -29,6 +29,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	180000000	/* from 10 MHz crystal */
 #define AT91C_MASTER_CLOCK	60000000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
@@ -115,7 +117,13 @@
 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 
 #define CONFIG_SYS_FLASH_BASE			0x10000000
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index 5c06642..26c2bcb 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MAIN_CLOCK	179712000
@@ -34,6 +36,7 @@
 #define AT91C_MASTER_CLOCK	59904000
 #define AT91_SLOW_CLOCK	32768 /* slow clock */
 
+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
 #define CONFIG_AT91RM9200DK	1 /* on an AT91RM9200DK Board    */
 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
 #define CONFIG_CMDLINE_TAG	1 /* enable passing of ATAGs    */
@@ -166,7 +169,13 @@
 /* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
 #define CONFIG_SYS_MEMTEST_END	0x00100000
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT	20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index ab5cbca..621b606 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -31,6 +31,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* Common stuff */
 #define CONFIG_SYS_HZ			1000	/* decrementer freq */
 #define CONFIG_MEESC			1	/* Board is esd MEESC */
@@ -56,6 +58,8 @@
  */
 
 /* Console output */
+#define CONFIG_AT91_GPIO			1
+
 #define CONFIG_ATMEL_USART			1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -121,6 +125,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 0c2ee60..3138b49 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
@@ -181,7 +183,13 @@
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #undef CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 399d15f..65bc920 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91SAM9261"
 
@@ -157,6 +159,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -236,6 +240,9 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA16
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
+
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER			1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 0af1280..b44c713 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -171,6 +173,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -259,6 +263,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 #define CONFIG_CMD_JFFS2		1
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index f4b3477..3f0723f 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM)
 #define CONFIG_SBC35_A9G20
 #endif
@@ -57,6 +59,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART0
 #undef CONFIG_USART1
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 4ad081b..466d27b 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -30,6 +30,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM)
 #define CONFIG_TNY_A9260
 #elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM)
@@ -66,6 +68,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
-- 
1.6.0.2




More information about the U-Boot mailing list