[U-Boot] MMC problem in PXA270 hardware

Wolfgang Denk wd at denx.de
Mon Jan 18 12:31:52 CET 2010


Dear Vaisakh P S,

In message <27208581.post at talk.nabble.com> you wrote:
> 
> I did some more debugging, i dumped the MBR for the sdcard, and it was
> proper in OS in board and PC.
> 
> Here is the dump i got in OS:
> 
> 00000000  fa b8 00 10 8e d0 bc 00  b0 b8 00 00 8e d8 8e c0 
> 00000010  fb be 00 7c bf 00 06 b9  00 02 f3 a4 ea 21 06 00 
> 00000020  00 be be 07 38 04 75 0b  83 c6 10 81 fe fe 07 75 
...
> But in Uboot, the dump which i got MBR read was the following
> 
>  0xea 0xa8 0x0 0x0 0x8e 0xc0 0xac 0x0 0xa0 0xa8 0x0 0x0 0x8e 0xc8 0x8e 0xc0
> 0xea 0xae 0x0 0x6c 0xae 0x0 0x6 0xa8 0x0 0x2 0xe2 0xa4 0xea 0x20 0x6 0x0 0x0
> 0xae 0xae 0x6 0x28 0x4 0x64 0xa 0x82 0xc6 0x0 0x80 0xee 0xee 0x6 0x64 0xe2

Seems something is eating the 0x10 bit, so 0xFA becomes 0xEA, etc.

Check your harware, eventually a signal is not connected correctly?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I haven't lost my mind -- it's backed up on tape somewhere.


More information about the U-Boot mailing list