[U-Boot] [PATCH 0/2] i.MX31: Activate NAND support for PDK board.

[Magnus Lilja]

Hi all,

These patches applies on the previously submitted NAND patches
for the i.MX31
(http://lists.denx.de/pipermail/u-boot/2009-November/064213.html).

The patches (including the above mentioned patches), applies on
the current U-boot tip.

The series add support for large page NAND, using the same layout
as the latest Linux driver, for i.MX31 and finally activates
general NAND support and specifically NAND environment for the 
i.MX31 PDK board.

Magnus Lilja (2):
  MXC: Add large page oob layout for i.MX31 NAND controller.
  MX31: Activate NAND environment on i.MX31 PDK board.

 drivers/mtd/nand/mxc_nand.c |   12 ++++++++++++
 include/configs/mx31pdk.h   |   25 +++++++++++++++++++++----
 2 files changed, 33 insertions(+), 4 deletions(-)