[U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5

[kevin.morfitt at fearnside-systems.co.uk]

Scott Wood wrote:
> On Thu, Nov 05, 2009 at 08:53:36AM +0000, kevin.morfitt at fearnside-systems.co.uk wrote:
>> This patch updates the s3c2410 nand driver from that of linux 2.6.31.5, 
>> modified to make it work in the u-boot mtd nand architecture and to allow
>> setting the flash timing parameters from a board config file instead of
>> being hard coded. Note that this modified driver supports s3c2410 and 
>> s3c2440.
>>
>> Signed-off-by: Kevin Morfitt <kevin.morfitt at fearnside-systems.co.uk>
>> ---
>>
>> checkpatch.pl shows no errors or warnings, and MAKEALL ARM9 shows no new
>> errors or warnings.
>>
>> Tested on an Embest SBC2440-II Board with local s3c2440 patches as I don't
>> have an s3c2410 board.
>>
>>  drivers/mtd/nand/s3c2410_nand.c        |  134 +++++++++++++++++--------------
>>  include/asm-arm/arch-s3c24x0/s3c2410.h |   25 ++++++
>>  2 files changed, 98 insertions(+), 61 deletions(-)
> 
> It looks like this got missed, probably because it either depended on
> something in (or destined for) the ARM tree, or I just assumed that because
> of the "PATCH ARM".
> 
> Unfortunately, it doesn't apply cleanly anymore.  Could you resend, if it's
> still needed?

It was part of adding s3c2440 support which I've had to re-work quite a lot 
and is currently waiting for comments on a set of re-worked patches. I think
it would be simpler if I dropped this one and submitted a replacement later
on. I think the s3c2410 nand driver code is different in the u-boot main, 
Samsung SOC, and NAND repositories though so I'm not sure what I should base
a future patch on given that Wolfgang asked me to always base patches on 
u-boot master.

> 
> -Scott
>