[U-Boot] 83xx, uec: split enet_interface in two variables, was: 83xx, uec: adjust enet_interface settings on the fly.
Heiko Schocher
hs at denx.de
Wed Jan 20 09:04:28 CET 2010
There's no sensible reason to unite speed and interface type into
one variable. So split this variable enet_interface into two
vars: enet_interface_type, which hold the interface type and speed.
Also: add the possibility for switching between 10 and 100 MBit
interfaces on the fly, when running in FAST_ETH mode.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
board/freescale/mpc8360emds/mpc8360emds.c | 3 +-
drivers/qe/uec.c | 122 ++++++++++++++++-------------
drivers/qe/uec.h | 34 ++++----
drivers/qe/uec_phy.c | 84 +++++++++++---------
include/configs/MPC8323ERDB.h | 6 +-
include/configs/MPC832XEMDS.h | 6 +-
include/configs/MPC8360EMDS.h | 6 +-
include/configs/MPC8360ERDK.h | 6 +-
include/configs/MPC8568MDS.h | 6 +-
include/configs/MPC8569MDS.h | 30 +++++---
include/configs/kmeter1.h | 3 +-
11 files changed, 175 insertions(+), 131 deletions(-)
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index d4ba043..4f55732 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -159,7 +159,8 @@ int board_eth_init(bd_t *bd)
int i;
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface = ENET_1000_RGMII_RXID;
+ uec_info[i].enet_interface_type = RGMII_RXID;
+ uec_info[i].speed = 1000;
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index db95ada..881632d 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -323,9 +323,10 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
return 0;
}
-static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
+static int uec_set_mac_if_mode(uec_private_t *uec,
+ enet_interface_type_e if_mode, int speed)
{
- enet_interface_e enet_if_mode;
+ enet_interface_type_e enet_if_mode;
uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
@@ -346,52 +347,68 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
- switch (enet_if_mode) {
- case ENET_100_MII:
- case ENET_10_MII:
+ switch (speed) {
+ case 10:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ switch (enet_if_mode) {
+ case MII:
+ break;
+ case RGMII:
+ upsmr |= (UPSMR_RPM | UPSMR_R10M);
+ break;
+ case RMII:
+ upsmr |= (UPSMR_R10M | UPSMR_RMM);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
break;
- case ENET_1000_GMII:
- maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
- break;
- case ENET_1000_TBI:
- maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
- upsmr |= UPSMR_TBIM;
- break;
- case ENET_1000_RTBI:
- maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
- upsmr |= (UPSMR_RPM | UPSMR_TBIM);
- break;
- case ENET_1000_RGMII_RXID:
- case ENET_1000_RGMII_ID:
- case ENET_1000_RGMII:
- maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
- upsmr |= UPSMR_RPM;
- break;
- case ENET_100_RGMII:
- maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
- upsmr |= UPSMR_RPM;
- break;
- case ENET_10_RGMII:
- maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
- upsmr |= (UPSMR_RPM | UPSMR_R10M);
- break;
- case ENET_100_RMII:
- maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
- upsmr |= UPSMR_RMM;
- break;
- case ENET_10_RMII:
+ case 100:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
- upsmr |= (UPSMR_R10M | UPSMR_RMM);
+ switch (enet_if_mode) {
+ case MII:
+ break;
+ case RGMII:
+ upsmr |= UPSMR_RPM;
+ break;
+ case RMII:
+ upsmr |= UPSMR_RMM;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
break;
- case ENET_1000_SGMII:
+ case 1000:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
- upsmr |= UPSMR_SGMM;
+ switch (enet_if_mode) {
+ case GMII:
+ break;
+ case TBI:
+ upsmr |= UPSMR_TBIM;
+ break;
+ case RTBI:
+ upsmr |= (UPSMR_RPM | UPSMR_TBIM);
+ break;
+ case RGMII_RXID:
+ case RGMII_ID:
+ case RGMII:
+ upsmr |= UPSMR_RPM;
+ break;
+ case SGMII:
+ upsmr |= UPSMR_SGMM;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
break;
default:
return -EINVAL;
break;
}
+
out_be32(&uec_regs->maccfg2, maccfg2);
out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
@@ -504,7 +521,7 @@ static void adjust_link(struct eth_device *dev)
struct uec_mii_info *mii_info = uec->mii_info;
extern void change_phy_interface_mode(struct eth_device *dev,
- enet_interface_e mode);
+ enet_interface_type_e mode, int speed);
uec_regs = uec->uec_regs;
if (mii_info->link) {
@@ -522,25 +539,19 @@ static void adjust_link(struct eth_device *dev)
}
if (mii_info->speed != uec->oldspeed) {
+ enet_interface_type_e mode = \
+ uec->uec_info->enet_interface_type;
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
switch (mii_info->speed) {
case 1000:
break;
case 100:
printf ("switching to rgmii 100\n");
- /* change phy to rgmii 100 */
- change_phy_interface_mode(dev,
- ENET_100_RGMII);
- /* change the MAC interface mode */
- uec_set_mac_if_mode(uec,ENET_100_RGMII);
+ mode = RGMII;
break;
case 10:
printf ("switching to rgmii 10\n");
- /* change phy to rgmii 10 */
- change_phy_interface_mode(dev,
- ENET_10_RGMII);
- /* change the MAC interface mode */
- uec_set_mac_if_mode(uec,ENET_10_RGMII);
+ mode = RGMII;
break;
default:
printf("%s: Ack,Speed(%d)is illegal\n",
@@ -548,6 +559,11 @@ static void adjust_link(struct eth_device *dev)
break;
}
}
+
+ /* change phy */
+ change_phy_interface_mode(dev, mode, mii_info->speed);
+ /* change the MAC interface mode */
+ uec_set_mac_if_mode(uec, mode, mii_info->speed);
printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
uec->oldspeed = mii_info->speed;
@@ -980,7 +996,6 @@ static int uec_startup(uec_private_t *uec)
int num_threads_tx;
int num_threads_rx;
u32 utbipar;
- enet_interface_e enet_interface;
u32 length;
u32 align;
qe_bd_t *bd;
@@ -1060,7 +1075,7 @@ static int uec_startup(uec_private_t *uec)
out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
/* Setup MAC interface mode */
- uec_set_mac_if_mode(uec, uec_info->enet_interface);
+ uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed);
/* Setup MII management base */
#ifndef CONFIG_eTSEC_MDIO_BUS
@@ -1075,7 +1090,6 @@ static int uec_startup(uec_private_t *uec)
/* Setup UTBIPAR */
utbipar = in_be32(&uec_regs->utbipar);
utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
- enet_interface = uec->uec_info->enet_interface;
/* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
* This frees up the remaining SMI addresses for use.
@@ -1084,7 +1098,8 @@ static int uec_startup(uec_private_t *uec)
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
- if (uec->uec_info->enet_interface == ENET_1000_SGMII) {
+ if ((uec->uec_info->enet_interface_type == SGMII) &&
+ (uec->uec_info->speed == 1000)) {
uec_write_phy_reg(uec->dev, uec_regs->utbipar,
ENET_TBI_MII_ANA, TBIANA_SETTINGS);
@@ -1215,6 +1230,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
if (err || i <= 0)
printf("warning: %s: timeout on PHY link\n", dev->name);
+ adjust_link(dev);
uec->the_first_run = 1;
}
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index febfbce..2a9e2dc 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -662,22 +662,18 @@ typedef enum uec_num_of_threads {
/* UEC ethernet interface type
*/
-typedef enum enet_interface {
- ENET_10_MII,
- ENET_10_RMII,
- ENET_10_RGMII,
- ENET_100_MII,
- ENET_100_RMII,
- ENET_100_RGMII,
- ENET_1000_GMII,
- ENET_1000_RGMII,
- ENET_1000_RGMII_ID,
- ENET_1000_RGMII_RXID,
- ENET_1000_RGMII_TXID,
- ENET_1000_TBI,
- ENET_1000_RTBI,
- ENET_1000_SGMII
-} enet_interface_e;
+typedef enum enet_interface_type {
+ MII,
+ RMII,
+ RGMII,
+ GMII,
+ RGMII_ID,
+ RGMII_RXID,
+ RGMII_TXID,
+ TBI,
+ RTBI,
+ SGMII
+} enet_interface_type_e;
/* UEC initialization info struct
*/
@@ -696,7 +692,8 @@ typedef enum enet_interface {
.tx_bd_ring_len = 16, \
.rx_bd_ring_len = 16, \
.phy_address = CONFIG_SYS_UEC##num##_PHY_ADDR, \
- .enet_interface = CONFIG_SYS_UEC##num##_INTERFACE_MODE, \
+ .enet_interface_type = CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \
+ .speed = CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \
}
typedef struct uec_info {
@@ -708,7 +705,8 @@ typedef struct uec_info {
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enet_interface_e enet_interface;
+ enet_interface_type_e enet_interface_type;
+ int speed;
} uec_info_t;
/* UEC driver initialized info
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 9715183..c4214d9 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -401,7 +401,8 @@ static int bcm_init(struct uec_mii_info *mii_info)
gbit_config_aneg(mii_info);
- if (uec->uec_info->enet_interface == ENET_1000_RGMII_RXID) {
+ if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
+ (uec->uec_info->speed == 1000)) {
u16 val;
int cnt = 50;
@@ -429,20 +430,22 @@ static int marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
- enum enet_interface iface = uec->uec_info->enet_interface;
+ enum enet_interface_type iface = uec->uec_info->enet_interface_type;
+ int speed = uec->uec_info->speed;
- if (iface == ENET_1000_RGMII_ID ||
- iface == ENET_1000_RGMII_RXID ||
- iface == ENET_1000_RGMII_TXID) {
+ if ((speed == 1000) &&
+ (iface == RGMII_ID ||
+ iface == RGMII_RXID ||
+ iface == RGMII_TXID)) {
int temp;
temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- if (iface == ENET_1000_RGMII_ID) {
+ if (iface == RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
- } else if (iface == ENET_1000_RGMII_RXID) {
+ } else if (iface == RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
- } else if (iface == ENET_1000_RGMII_TXID) {
+ } else if (iface == RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
@@ -795,7 +798,9 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
}
void marvell_phy_interface_mode (struct eth_device *dev,
- enet_interface_e mode)
+ enet_interface_type_e type,
+ int speed
+ )
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
@@ -807,33 +812,35 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
mii_info = uec->mii_info;
- if (mode == ENET_100_RGMII) {
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x1d, 0x001f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x0005);
- phy_write (mii_info, 0x1e, 0x0000);
- phy_write (mii_info, 0x1e, 0x0100);
- phy_write (mii_info, 0x09, 0x0e00);
- phy_write (mii_info, 0x04, 0x01e1);
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x00, 0x1000);
- udelay (100000);
- phy_write (mii_info, 0x00, 0x2900);
- phy_write (mii_info, 0x14, 0x0cd2);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x09, 0x0000);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x04, 0x05e1);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x00, 0x2100);
- udelay (1000000);
- } else if (mode == ENET_10_RGMII) {
- phy_write (mii_info, 0x14, 0x8e40);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x14, 0x0c82);
- phy_write (mii_info, 0x00, 0x8100);
- udelay (1000000);
+ if (type == RGMII) {
+ if (speed == 100) {
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x1d, 0x001f);
+ phy_write (mii_info, 0x1e, 0x200c);
+ phy_write (mii_info, 0x1d, 0x0005);
+ phy_write (mii_info, 0x1e, 0x0000);
+ phy_write (mii_info, 0x1e, 0x0100);
+ phy_write (mii_info, 0x09, 0x0e00);
+ phy_write (mii_info, 0x04, 0x01e1);
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x00, 0x1000);
+ udelay (100000);
+ phy_write (mii_info, 0x00, 0x2900);
+ phy_write (mii_info, 0x14, 0x0cd2);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x09, 0x0000);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x04, 0x05e1);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x00, 0x2100);
+ udelay (1000000);
+ } else if (speed == 10) {
+ phy_write (mii_info, 0x14, 0x8e40);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x14, 0x0c82);
+ phy_write (mii_info, 0x00, 0x8100);
+ udelay (1000000);
+ }
}
/* handle 88e1111 rev.B2 erratum 5.6 */
@@ -844,9 +851,10 @@ void marvell_phy_interface_mode (struct eth_device *dev,
/* now the B2 will correctly report autoneg completion status */
}
-void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
+void change_phy_interface_mode (struct eth_device *dev,
+ enet_interface_type_e type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
- marvell_phy_interface_mode (dev, mode);
+ marvell_phy_interface_mode (dev, type, speed);
#endif
}
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 356586c..8e6f7ce 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -347,7 +347,8 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 4
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
#define CONFIG_UEC_ETH2 /* ETH4 */
@@ -358,7 +359,8 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK3
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
/*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f17f9c7..1adac64 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -362,7 +362,8 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 3
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
#define CONFIG_UEC_ETH2 /* ETH4 */
@@ -373,7 +374,8 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK8
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
/*
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 8520155..6fa7287 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -400,7 +400,8 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -411,7 +412,8 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
/*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 1d1f94f..c6f1409 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -318,7 +318,8 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 2
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -329,7 +330,8 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
/*
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 128a7e1..6973538 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -333,7 +333,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -344,7 +345,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
#endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 1e659e2..d80d897 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -317,12 +317,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */
@@ -336,12 +338,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */
@@ -355,12 +359,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 2
-#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */
@@ -374,12 +380,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 3
-#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */
@@ -392,7 +400,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR 4
-#define CONFIG_SYS_UEC6_INTERFACE_MODE ENET_1000_SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH6 */
#undef CONFIG_UEC_ETH8 /* GETH8 */
@@ -404,7 +413,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR 6
-#define CONFIG_SYS_UEC8_INTERFACE_MODE ENET_1000_SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH8 */
#endif /* CONFIG_QE */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 71658d8..e812eda 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -293,7 +293,8 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
/*
--
1.6.2.5
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list