[U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.

[Joakim Tjernlund]

>
> Hi Richard,
>
> > Detlev Zundel wrote:
> > <snip>
> >>
> >> Please excuse my ignorance, but why not simply remove the #ifdef
> >> CONFIG_AMIGAONEG3SE in board_init_f?  Actually I was hoping to remove
> >> the Amigaone special case.
> >>
> >> Cheers
> >>   Detlev
> >>
> > I prefer getting the data from board_init_r because we really are
> > running from RAM at that point; dest_addr is a passed in function
> > param.
>
> I see, thanks for the explanation.
>
> > In board_init_f, the addr variable is just what the calculated address
> > is. If we must do the copy there I'd like to move the gd->relocaddr =
> > addr to just before the call to relocate_code, that way if the
> > calculation code got reworked/refactored, we always copy the correct
> > addr variable.
>
> Yes, I also agree - if we want to have it in _f, we should move the
> assignment.
>
> > Plus the line: debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
> in board_init_r

This printout is so useful that it should have its own config option so
one can have it always on without enabling debug.

   Jocke