[U-Boot] [PATCH V2 9/9] Add initial support for Freescale mx51evk board
Stefano Babic
sbabic at denx.de
Wed Jan 13 10:50:59 CET 2010
The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.
Signed-off-by: Stefano Babic <sbabic at denx.de>
Signed-off-by: Fred Fan <fanyefeng at gmail.com>
---
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 8 +
board/freescale/mx51evk/Makefile | 48 ++++
board/freescale/mx51evk/config.mk | 25 ++
board/freescale/mx51evk/imximage.cfg | 119 ++++++++++
board/freescale/mx51evk/mx51evk.c | 432 ++++++++++++++++++++++++++++++++++
board/freescale/mx51evk/mx51evk.h | 51 ++++
include/configs/mx51evk.h | 175 ++++++++++++++
9 files changed, 863 insertions(+), 0 deletions(-)
create mode 100644 board/freescale/mx51evk/Makefile
create mode 100644 board/freescale/mx51evk/config.mk
create mode 100644 board/freescale/mx51evk/imximage.cfg
create mode 100644 board/freescale/mx51evk/mx51evk.c
create mode 100644 board/freescale/mx51evk/mx51evk.h
create mode 100644 include/configs/mx51evk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 9734b1d..8637550 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -151,6 +151,10 @@ Dave Ellis <DGE at sixnetio.com>
SXNI855T MPC8xx
+Fred Fan <fanyefeng at gmail.com>
+
+ mx51evk i.MX51
+
Thomas Frieden <ThomasF at hyperion-entertainment.com>
AmigaOneG3SE MPC7xx
diff --git a/MAKEALL b/MAKEALL
index ab1bb6f..485107a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -617,6 +617,7 @@ LIST_ARM11=" \
#########################################################################
LIST_ARM_CORTEX_A8=" \
devkit8000 \
+ mx51evk \
omap3_beagle \
omap3_overo \
omap3_evm \
diff --git a/Makefile b/Makefile
index ed6156f..01bf9a2 100644
--- a/Makefile
+++ b/Makefile
@@ -324,6 +324,10 @@ $(obj)u-boot.img: $(obj)u-boot.bin
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
+ -e $(TEXT_BASE) -d $< $@
+
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
@@ -3263,6 +3267,9 @@ mx31pdk_nand_config : unconfig
fi
@$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
+mx51evk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
+
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
@@ -3729,6 +3736,7 @@ clobber: clean
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
@rm -f $(obj)u-boot.kwb
+ @rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
diff --git a/board/freescale/mx51evk/Makefile b/board/freescale/mx51evk/Makefile
new file mode 100644
index 0000000..eb12fc5
--- /dev/null
+++ b/board/freescale/mx51evk/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
+#
+# (C) Copyright 2009 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := mx51evk.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mx51evk/config.mk b/board/freescale/mx51evk/config.mk
new file mode 100644
index 0000000..c8279ec
--- /dev/null
+++ b/board/freescale/mx51evk/config.mk
@@ -0,0 +1,25 @@
+#
+# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds
+TEXT_BASE = 0x97800000
+IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
new file mode 100644
index 0000000..db09913
--- /dev/null
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -0,0 +1,119 @@
+#
+# (C Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi_flash, nand, onenand, sd_card
+
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73FA88a0 0x200
+DATA 4 0x73FA850c 0x20c5
+DATA 4 0x73FA8510 0x20c5
+DATA 4 0x73FA883c 0x2
+DATA 4 0x73FA8848 0x2
+DATA 4 0x73FA84b8 0xe7
+DATA 4 0x73FA84bc 0x45
+DATA 4 0x73FA84c0 0x45
+DATA 4 0x73FA84c4 0x45
+DATA 4 0x73FA84c8 0x45
+DATA 4 0x73FA8820 0x0
+DATA 4 0x73FA84a4 0x3
+DATA 4 0x73FA84a8 0x3
+DATA 4 0x73FA84ac 0xe3
+DATA 4 0x73FA84b0 0xe3
+DATA 4 0x73FA84b4 0xe3
+DATA 4 0x73FA84cc 0xe3
+DATA 4 0x73FA84d0 0xe2
+
+DATA 4 0x73FA882c 0x6
+DATA 4 0x73FA88a4 0x6
+DATA 4 0x73FA88ac 0x6
+DATA 4 0x73FA88b8 0x6
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83FD9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83FD9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83FD9010 0x000ad0d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83FD9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83FD900C 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83FD9014 0x04008008
+DATA 4 0x83FD9014 0x0000801a
+DATA 4 0x83FD9014 0x0000801b
+DATA 4 0x83FD9014 0x00448019
+DATA 4 0x83FD9014 0x07328018
+DATA 4 0x83FD9014 0x04008008
+DATA 4 0x83FD9014 0x00008010
+DATA 4 0x83FD9014 0x00008010
+DATA 4 0x83FD9014 0x06328018
+DATA 4 0x83FD9014 0x03808019
+DATA 4 0x83FD9014 0x00408019
+DATA 4 0x83FD9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83FD9014 0x0400800c
+DATA 4 0x83FD9014 0x0000801e
+DATA 4 0x83FD9014 0x0000801f
+DATA 4 0x83FD9014 0x0000801d
+DATA 4 0x83FD9014 0x0732801c
+DATA 4 0x83FD9014 0x0400800c
+DATA 4 0x83FD9014 0x00008014
+DATA 4 0x83FD9014 0x00008014
+DATA 4 0x83FD9014 0x0632801c
+DATA 4 0x83FD9014 0x0380801d
+DATA 4 0x83FD9014 0x0040801d
+DATA 4 0x83FD9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83FD9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83FD9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83FD9010 0x000ad6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83FD9034 0x90000000
+DATA 4 0x83FD9014 0x00000000
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
new file mode 100644
index 0000000..82f73f0
--- /dev/null
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -0,0 +1,432 @@
+/*
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx51_pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/errno.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include "mx51evk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 system_rev;
+struct io_board_ctrl *mx51_io_board;
+
+u32 get_board_rev(void)
+{
+ return system_rev;
+}
+
+static inline void setup_soc_rev(void)
+{
+ int reg;
+
+ reg = __raw_readl(ROM_SI_REV);
+ switch (reg) {
+ case 0x02:
+ system_rev = 0x51000 | CHIP_REV_1_1;
+ break;
+ case 0x10:
+ if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
+ system_rev = 0x51000 | CHIP_REV_2_5;
+ else
+ system_rev = 0x51000 | CHIP_REV_2_0;
+ break;
+ case 0x20:
+ system_rev = 0x51000 | CHIP_REV_3_0;
+ break;
+ default:
+ system_rev = 0x51000 | CHIP_REV_1_0;
+ break;
+ }
+}
+
+static inline void set_board_rev(int rev)
+{
+ system_rev |= (rev & 0xF) << 8;
+}
+
+inline int is_soc_rev(int rev)
+{
+ return (system_rev & 0xFF) - rev;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+static void setup_uart(void)
+{
+ unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
+
+ mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
+ mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
+ mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
+ mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
+}
+
+static void setup_expio(void)
+{
+ u32 reg;
+
+ /* CS5 setup */
+ mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0);
+ writel(0x00410089, WEIM_BASE_ADDR + 0x78 + CSGCR1);
+ writel(0x00000002, WEIM_BASE_ADDR + 0x78 + CSGCR2);
+ /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
+ writel(0x32260000, WEIM_BASE_ADDR + 0x78 + CSRCR1);
+ /* APR = 0 */
+ writel(0x00000000, WEIM_BASE_ADDR + 0x78 + CSRCR2);
+ /*
+ * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0,
+ * WCSA=0, WCSN=0
+ */
+ writel(0x72080F00, WEIM_BASE_ADDR + 0x78 + CSWCR1);
+
+ mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR +
+ IO_BOARD_OFFSET);
+ if ((readw(&mx51_io_board->id1) == 0xAAAA) &&
+ (readw(&mx51_io_board->id2) == 0x5555)) {
+ if (is_soc_rev(CHIP_REV_2_0) < 0) {
+ reg = readl(CCM_BASE_ADDR + CLKCTL_CBCDR);
+ reg = (reg & (~0x70000)) | 0x30000;
+ writel(reg, CCM_BASE_ADDR + CLKCTL_CBCDR);
+ /* make sure divider effective */
+ while (readl(CCM_BASE_ADDR + CLKCTL_CDHIPR) != 0)
+ ;
+ writel(0x0, CCM_BASE_ADDR + CLKCTL_CCDR);
+ }
+ } else {
+ /* CS1 */
+ writel(0x00410089, WEIM_BASE_ADDR + 0x18 + CSGCR1);
+ writel(0x00000002, WEIM_BASE_ADDR + 0x18 + CSGCR2);
+ /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
+ writel(0x32260000, WEIM_BASE_ADDR + 0x18 + CSRCR1);
+ /* APR=0 */
+ writel(0x00000000, WEIM_BASE_ADDR + 0x18 + CSRCR2);
+ /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0,
+ * WEN=0, WCSA=0, WCSN=0
+ */
+ writel(0x72080F00, WEIM_BASE_ADDR + 0x18 + CSWCR1);
+ mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR +
+ IO_BOARD_OFFSET);
+ }
+
+ /* Reset interrupt status reg */
+ writew(0x1F, &(mx51_io_board->int_rest));
+ writew(0x00, &(mx51_io_board->int_rest));
+ writew(0xFFFF, &(mx51_io_board->int_mask));
+
+ /* Reset the XUART and Ethernet controllers */
+ reg = readw(&(mx51_io_board->sw_reset));
+ reg |= 0x9;
+ writew(reg, &(mx51_io_board->sw_reset));
+ reg &= ~0x9;
+ writew(reg, &(mx51_io_board->sw_reset));
+}
+
+static void setup_fec(void)
+{
+ /*FEC_MDIO*/
+ mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);
+
+ /*FEC_MDC*/
+ mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
+
+ /* FEC RDATA[3] */
+ mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
+
+ /* FEC RDATA[2] */
+ mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
+
+ /* FEC RDATA[1] */
+ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
+
+ /* FEC RDATA[0] */
+ mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
+
+ /* FEC TDATA[3] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
+
+ /* FEC TDATA[2] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
+
+ /* FEC TDATA[1] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
+
+ /* FEC TDATA[0] */
+ mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
+
+ /* FEC TX_EN */
+ mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
+
+ /* FEC TX_ER */
+ mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
+
+ /* FEC TX_CLK */
+ mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
+
+ /* FEC TX_COL */
+ mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+
+ /* FEC RX_CLK */
+ mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
+
+ /* FEC RX_CRS */
+ mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
+
+ /* FEC RX_ER */
+ mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
+
+ /* FEC RX_DV */
+ mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
+}
+
+#ifdef CONFIG_NET_MULTI
+int board_eth_init(bd_t *bis)
+{
+ int rc = -ENODEV;
+
+#ifdef CONFIG_FEC_MXC
+ rc = fecmxc_initialize(bis);
+#endif
+ return rc;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+int get_mmc_cd(struct mmc *mmc)
+{
+ uint32_t reg_base = (uint32_t)mmc->priv;
+ int ret;
+
+ if (reg_base == MMC_SDHC1_BASE_ADDR)
+ ret = readl(GPIO1_BASE_ADDR) & 0x01;
+ else
+ ret = readl(GPIO1_BASE_ADDR) & 0x40;
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ u32 interface_esdhc = 0;
+ s32 status = 0;
+ u32 esdhc_base_pointer;
+
+ for (interface_esdhc = 0; interface_esdhc < CONFIG_SYS_FSL_ESDHC_NUM;
+ interface_esdhc++) {
+ switch (interface_esdhc) {
+ case 0:
+ esdhc_base_pointer = MMC_SDHC1_BASE_ADDR;
+
+ mxc_request_iomux(MX51_PIN_SD1_CMD,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_CLK,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA0,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA1,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA2,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA3,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_request_iomux(MX51_PIN_GPIO1_0,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
+ PAD_CTL_HYS_ENABLE);
+ mxc_request_iomux(MX51_PIN_GPIO1_1,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
+ PAD_CTL_HYS_ENABLE);
+ break;
+ case 1:
+ esdhc_base_pointer = MMC_SDHC2_BASE_ADDR;
+
+ mxc_request_iomux(MX51_PIN_SD2_CMD,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD2_CLK,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD2_DATA0,
+ IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX51_PIN_SD2_DATA1,
+ IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX51_PIN_SD2_DATA2,
+ IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX51_PIN_SD2_DATA3,
+ IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
+ PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
+ PAD_CTL_SRE_FAST);
+ mxc_request_iomux(MX51_PIN_SD2_CMD,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_GPIO1_6,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
+ PAD_CTL_HYS_ENABLE);
+ mxc_request_iomux(MX51_PIN_GPIO1_5,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
+ PAD_CTL_HYS_ENABLE);
+ break;
+ }
+ status |= fsl_esdhc_initialize(bis, esdhc_base_pointer,
+ get_mmc_cd);
+ }
+ return status;
+}
+
+#endif
+
+int board_init(void)
+{
+ setup_soc_rev();
+
+ gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE; /* board id for linux */
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ setup_uart();
+ setup_expio();
+ setup_fec();
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: MX51EVK ");
+
+ switch (system_rev & 0xff) {
+ case CHIP_REV_3_0:
+ puts("3.0 [");
+ break;
+ case CHIP_REV_2_5:
+ puts("2.5 [");
+ break;
+ case CHIP_REV_2_0:
+ puts("2.0 [");
+ break;
+ case CHIP_REV_1_1:
+ puts("1.1 [");
+ break;
+ case CHIP_REV_1_0:
+ default:
+ puts("1.0 [");
+ break;
+ }
+
+ switch (__raw_readl(SRC_BASE_ADDR + 0x8)) {
+ case 0x0001:
+ puts("POR");
+ break;
+ case 0x0009:
+ puts("RST");
+ break;
+ case 0x0010:
+ case 0x0011:
+ puts("WDOG");
+ break;
+ default:
+ puts("unknown");
+ }
+ puts("]\n");
+ return 0;
+}
+
diff --git a/board/freescale/mx51evk/mx51evk.h b/board/freescale/mx51evk/mx51evk.h
new file mode 100644
index 0000000..524cdcc
--- /dev/null
+++ b/board/freescale/mx51evk/mx51evk.h
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __BOARD_FREESCALE_MX51_EVK_H__
+#define __BOARD_FREESCALE_MX51_EVK_H__
+
+#ifndef __ASSEMBLY__
+struct io_board_ctrl {
+ u16 led_ctrl; /* 0x00 */
+ u16 resv1[0x03];
+ u16 sb_stat; /* 0x08 */
+ u16 resv2[0x03];
+ u16 int_stat; /* 0x10 */
+ u16 resv3[0x07];
+ u16 int_rest; /* 0x20 */
+ u16 resv4[0x0B];
+ u16 int_mask; /* 0x38 */
+ u16 resv5[0x03];
+ u16 id1; /* 0x40 */
+ u16 resv6[0x03];
+ u16 id2; /* 0x48 */
+ u16 resv7[0x03];
+ u16 version; /* 0x50 */
+ u16 resv8[0x03];
+ u16 id3; /* 0x58 */
+ u16 resv9[0x03];
+ u16 sw_reset; /* 0x60 */
+};
+#endif
+
+#define IO_BOARD_OFFSET (0x20000)
+#endif
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
new file mode 100644
index 0000000..42b1bf5
--- /dev/null
+++ b/include/configs/mx51evk.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX51-3Stack Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_SYS_APCS_GNU
+#define CONFIG_L2_OFF
+
+#define CONFIG_MX51 /* in a mx51 */
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */
+#define CONFIG_MX51_CLK32 32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX51_UART1
+
+/*
+ * MMC Configs
+ * */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
+#define CONFIG_SYS_FSL_ESDHC_NUM 2
+
+#define CONFIG_MMC
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Eth Configs
+ */
+#define CONFIG_HAS_ETH1
+#define CONFIG_NET_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1F
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_PRIME "FEC0"
+
+#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot_addr=0xa0000000\0" \
+ "uboot=u-boot.bin\0" \
+ "loadaddr=0x90800000\0" \
+ "bootargs_base=setenv bootargs console= tty console=ttymxc0,${baudrate}\0"\
+ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+ "bootcmd=run bootcmd_net\0" \
+ "bootcmd_net=run bootargs_base bootargs_nfs; " \
+ "tftpboot ${loadaddr} ${kernel}; bootm\0"
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "MX51EVK U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START CSD0_BASE_ADDR
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_CMDLINE_EDITING
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_IS_NOWHERE
+
+#endif /* __CONFIG_H */
--
1.6.3.3
More information about the U-Boot
mailing list