[U-Boot] uboot.bin for smdkc100_config fails to boot from NAND

[Naveen Krishna Ch]

Hi All,

I have a SMDKC100 boards with Single chip NAND

Built the mainline uboot for

Das U-Boot# smdkc100_config; make

i use a In-Circuit Debugger to flash the uboot.bin
to the NAND.

I checked the dip switches & Jumpers are proper.

The In-Circuit Debugger shows "Emulation running"
But, nothing comes up on the UART0

What could be the problem, Any pointers..


-- 
Shine bright,
(: Naveen Krishna Ch :)