[U-Boot] [PATCH 5/9] fec_mxc: cleanup and factor out imx27 dependencies
John Rigby
jcrigby at gmail.com
Wed Jan 13 05:43:57 CET 2010
general cleanup
move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c
make MX27 specific phy init conditional on CONFIG_MX27
replace call to imx_get_ahbclk with one to imx_get_fecclk
and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h
Signed-off-by: John Rigby <jcrigby at gmail.com>
---
cpu/arm926ejs/mx27/generic.c | 5 +++++
drivers/net/fec_mxc.c | 28 +++++++++++++---------------
include/asm-arm/arch-mx27/clock.h | 1 +
3 files changed, 19 insertions(+), 15 deletions(-)
diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c
index da05c55..30cf544 100644
--- a/cpu/arm926ejs/mx27/generic.c
+++ b/cpu/arm926ejs/mx27/generic.c
@@ -166,6 +166,11 @@ int print_cpuinfo (void)
int cpu_eth_init(bd_t *bis)
{
#if defined(CONFIG_FEC_MXC)
+ struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+ /* enable FEC clock */
+ writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
+ writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
return fecmxc_initialize(bis);
#else
return 0;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 19116f2..b5619eb 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -151,7 +151,9 @@ static int miiphy_restart_aneg(struct eth_device *dev)
* Wake up from sleep if necessary
* Reset PHY, then delay 300ns
*/
+#ifdef CONFIG_MX27
miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF);
+#endif
miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
PHY_BMCR_RESET);
udelay(1000);
@@ -343,7 +345,8 @@ static int fec_open(struct eth_device *edev)
/*
* Enable FEC-Lite controller
*/
- writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
+ &fec->eth->ecntrl);
miiphy_wait_aneg(edev);
miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR);
@@ -415,10 +418,10 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
- writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1,
+ writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
&fec->eth->mii_speed);
debug("fec_init: mii_speed %#lx\n",
- (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1);
+ (((imx_get_fecclk() / 1000000) + 2) / 5) << 1);
}
/*
* Set Opcode/Pause Duration Register
@@ -475,7 +478,7 @@ static void fec_halt(struct eth_device *dev)
/*
* issue graceful stop command to the FEC transmitter if necessary
*/
- writel(FEC_ECNTRL_RESET | readl(&fec->eth->x_cntrl),
+ writel(FEC_TCNTRL_GTS | readl(&fec->eth->x_cntrl),
&fec->eth->x_cntrl);
debug("eth_halt: wait for stop regs\n");
@@ -483,7 +486,7 @@ static void fec_halt(struct eth_device *dev)
* wait for graceful stop to register
*/
while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA)))
- ; /* FIXME ensure time */
+ udelay(1);
/*
* Disable SmartDMA tasks
@@ -495,7 +498,7 @@ static void fec_halt(struct eth_device *dev)
* Disable the Ethernet Controller
* Note: this will also reset the BD index counter!
*/
- writel(0, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
fec->rbd_index = 0;
fec->tbd_index = 0;
debug("eth_halt: done\n");
@@ -554,7 +557,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
* wait until frame is sent .
*/
while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) {
- /* FIXME: Timeout */
+ udelay(1);
}
debug("fec_send: status 0x%x index %d\n",
readw(&fec->tbd_base[fec->tbd_index].status),
@@ -651,7 +654,6 @@ static int fec_recv(struct eth_device *dev)
static int fec_probe(bd_t *bd)
{
- struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
struct eth_device *edev;
struct fec_priv *fec = &gfec;
unsigned char ethaddr_str[20];
@@ -659,10 +661,6 @@ static int fec_probe(bd_t *bd)
char *tmp = getenv("ethaddr");
char *end;
- /* enable FEC clock */
- writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
- writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
-
/* create and fill edev struct */
edev = (struct eth_device *)malloc(sizeof(struct eth_device));
if (!edev) {
@@ -681,7 +679,7 @@ static int fec_probe(bd_t *bd)
fec->xcv_type = MII100;
/* Reset chip. */
- writel(FEC_ECNTRL_RESET, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl);
while (readl(&fec->eth->ecntrl) & 1)
udelay(10);
@@ -706,10 +704,10 @@ static int fec_probe(bd_t *bd)
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
- writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1,
+ writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
&fec->eth->mii_speed);
debug("fec_init: mii_speed %#lx\n",
- (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1);
+ (((imx_get_fecclk() / 1000000) + 2) / 5) << 1);
sprintf(edev->name, "FEC_MXC");
diff --git a/include/asm-arm/arch-mx27/clock.h b/include/asm-arm/arch-mx27/clock.h
index 472e8f2..7e9c7aa 100644
--- a/include/asm-arm/arch-mx27/clock.h
+++ b/include/asm-arm/arch-mx27/clock.h
@@ -37,5 +37,6 @@ ulong imx_get_perclk3(void);
ulong imx_get_ahbclk(void);
#define imx_get_uartclk imx_get_perclk1
+#define imx_get_fecclk imx_get_ahbclk
#endif /* __ASM_ARCH_CLOCK_H */
--
1.6.4.2.236.gf324c
More information about the U-Boot
mailing list