[U-Boot] U-Boot Crashes with Dumps
anupbehare at gmail.com
anupbehare at gmail.com
Tue Jan 12 10:09:57 CET 2010
In my case CONFIG_SYS_MONITOR_LEN is 256KB
and CONFIG_SYS_MONITOR_BASE is 0xfffc0000
my destaddr is 0x1ffd5000
so gd->reloc_off = destaddr - CONFIG_SYS_MONITOR_BASE;
so gd->reloc_off = 0x20015000
also gd->malloc = 0x1fed1000
After that it continuously restarts with error machine check exception.
Is that mean ram initialization is not done or some thing with reloc_off as
it is going in -ve.
On 12-Jan-2010 12:56pm, Stefan Roese <sr at denx.de> wrote:
> On Tuesday 12 January 2010 08:02:51 anupbehare at gmail.com wrote:
> > I begin use U-Boot at my custom board based on ppc440x5.
> What kind of PPC4xx ist this? PPC440EPx?
> > Here is Mem Info that we are using on board:
> >
> > 16MB Nor flash with base address 0xfc000000
> > 512MB DDR with base addr 0x00000000
> > 256kb ISRAM with base addr 0xc0000000
> >
> > TEXT_BASE 0xfffc0000
> >
> > Tlb entries for board is:
> > tlbentry( 0xff000000, SZ_16M, 0xff000000, 0, AC_R|AC_X|AC_W) ------Flash
> > tlbentry( 0xc0000000, SZ_256K, 0xc0000000, 0, AC_R|AC_W|AC_X|SA_I)
> > ------ISRAM
> > tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_I|SA_G)
> > ------DDR
> > tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_I|SA_G)
> > ------DDR
> >
> >
> > I am trying to get a clean build of U-Boot to run on the PPC440x5 based
> > customized board. I have the latest versions U-Boot.
> > The system executes through board_init_f( ) without any problems, and
> gets
> > into board_init_r( ). The console output is as follows:
> >
> > 512 MB (ECC is ON, 400 MHz, CL 7)
> > Top of RAM usable for U-Boot at: 20000000
> > Reserving 170k for U-Boot at: 1ffd5000
> > Reserving 1040k for malloc() at: 1fed1000
> > Reserving 128 Bytes for Board Info at: 1fed0f80
> > Reserving 64 Bytes for Global Data at: 1fed0f40
> > Stack Pointer at: 1fed0f28
> > New Stack Pointer is: 1fed0f28
> > relocate addr_sp = 1fed0f28, id = 1fed0f40, addr = 1ffd5000
> >
> > Now running in RAM - U-Boot at: 1ffd5000
> >
> > NIP: 1FFD7764 XER: 00000000 LR: 1FFD7764 REGS: 1fed0e20 TRAP: 0200 DEAR:
> > FFED0F18
> > MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
> >
> > GPR00: 1FFD7338 1FED0F10 1FED0F40 1FFD5000 1FFD88E0 00000000 00000000
> > 1FFD7764
> > GPR08: 00000600 00002098 00000030 2FAF07FE FFFFFFFF C000B330 20002A00
> > 20015000
> > GPR16: 00000000 00000000 00000000 00000000 48FF2422 00000610 00002C20
> > 00000000
> > GPR24: 00000000 1FED0F40 1FFD5000 1FED5000 1FED0F80 1FFD5000 20002B10
> > 1FED1000
> > Call backtrace:
> > 1FFD88D8 1FFD76D8 00000000
> > machine check
> When U-Boot crashes/hangs upon relocation to SDRAM, you most likely have a
> problem with your SDRAM configuration. Again, which CPU are you using?
> How is
> the SDRAM connected (DIMM or onboard). I suggest you check your SDRAM
> controller setup again.
> > Here I am trying to use backtrace to debug but system is waiting at
> > folloing console o/p.
> >
> > [root at u-boot]$ cp ../../11dec_rec/u-boot/backtrace .
> > [root at u-boot]$backtrace System.map 0xdffeb000
> > Reading symbols from System.map
> > Using Address Offset 0xdffeb000
> This link might help:
> http://www.denx.de/wiki/DULG/DebuggingUBoot
> Especially chapter 10.1.2. Debugging of U-Boot After Relocation.
> Cheers,
> Stefan
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
More information about the U-Boot
mailing list