[U-Boot] [PATCH 2/3] Add EP93xx ethernet driver
Ben Warren
biggerbadderben at gmail.com
Mon Jan 25 05:09:23 CET 2010
Hi Matthias,
On Sun, Jan 24, 2010 at 8:56 AM, Matthias Kaehlcke <matthias at kaehlcke.net>wrote:
> Added ethernet driver for EP93xx SoCs
>
> Signed-off-by: Matthias Kaehlcke <matthias at kaehlcke.net>
> ---
> drivers/net/Makefile | 1 +
> drivers/net/ep93xx_eth.c | 654
> ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/ep93xx_eth.h | 144 ++++++++++
> include/common.h | 5 +
> include/netdev.h | 1 +
> 5 files changed, 805 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/ep93xx_eth.c
> create mode 100644 drivers/net/ep93xx_eth.h
>
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 904727e..dc3107c 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -37,6 +37,7 @@ COBJS-$(CONFIG_DNET) += dnet.o
> COBJS-$(CONFIG_E1000) += e1000.o
> COBJS-$(CONFIG_EEPRO100) += eepro100.o
> COBJS-$(CONFIG_ENC28J60) += enc28j60.o
> +COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
> COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
> COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
> COBJS-$(CONFIG_FTMAC100) += ftmac100.o
> diff --git a/drivers/net/ep93xx_eth.c b/drivers/net/ep93xx_eth.c
> new file mode 100644
> index 0000000..33d14df
> --- /dev/null
> +++ b/drivers/net/ep93xx_eth.c
> @@ -0,0 +1,654 @@
> +/*
> + * Cirrus Logic EP93xx ethernet MAC / MII driver.
> + *
> + * Copyright (C) 2010, 2009
> + * Matthias Kaehlcke <matthias at kaehlcke.net>
> + *
> + * Copyright (C) 2004, 2005
> + * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
> + *
> + * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet
> Driver,
> + * which is
> + *
> + * (C) Copyright 2002 2003
> + * Adam Bezanson, Network Audio Technologies, Inc.
> + * <bezanson at netaudiotech.com>
> + *
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <command.h>
> +#include <common.h>
> +#include <asm/arch/ep93xx.h>
> +#include <asm/io.h>
> +#include <malloc.h>
> +#include <miiphy.h>
> +#include <linux/types.h>
> +#include "ep93xx_eth.h"
> +
> +#define GET_PRIV(eth_dev) ((struct ep93xx_priv *)eth_dev->priv)
>
You should probably have parens around "eth_dev", although problems would be
found at compile time.
> +#define GET_REGS(eth_dev) (GET_PRIV(eth_dev)->regs)
> +
> +/* ep93xx_miiphy ops forward declarations */
> +static int ep93xx_miiphy_read(char * const dev, unsigned char const addr,
> + unsigned char const reg, unsigned short * const
> value);
> +static int ep93xx_miiphy_write(char * const dev, unsigned char const addr,
> + unsigned char const reg, unsigned short const
> value);
> +
> +#if defined(EP93XX_MAC_DEBUG)
> +/**
> + * Dump ep93xx_mac values to the terminal.
> + */
> +inline void dump_dev(struct eth_device *dev)
>
All of these local functions should be static. inline is probably
pointless, especially since they're only compiled in when you're debugging.
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int i;
> +
> + printf("\ndump_dev()\n");
> + printf(" rx_dq.base %08X\n", (uint32_t)priv->rx_dq.base);
>
If these are pointers, why not use %p instead of all this casting?
> + printf(" rx_dq.current %08X\n",
> (uint32_t)priv->rx_dq.current);
> + printf(" rx_dq.end %08X\n", (uint32_t)priv->rx_dq.end);
> + printf(" rx_sq.base %08X\n", (uint32_t)priv->rx_sq.base);
> + printf(" rx_sq.current %08X\n",
> (uint32_t)priv->rx_sq.current);
> + printf(" rx_sq.end %08X\n", (uint32_t)priv->rx_sq.end);
> +
> + for (i = 0; i < NUMRXDESC; i++)
> + printf(" rx_buffer[%2.d] %08X\n", i,
> + (uint32_t)NetRxPackets[i]);
> +
> + printf(" tx_dq.base %08X\n", (uint32_t)priv->tx_dq.base);
> + printf(" tx_dq.current %08X\n",
> (uint32_t)priv->tx_dq.current);
> + printf(" tx_dq.end %08X\n", (uint32_t)priv->tx_dq.end);
> + printf(" tx_sq.base %08X\n", (uint32_t)priv->tx_sq.base);
> + printf(" tx_sq.current %08X\n",
> (uint32_t)priv->tx_sq.current);
> + printf(" tx_sq.end %08X\n", (uint32_t)priv->tx_sq.end);
> +}
> +
> +/**
> + * Dump all RX status queue entries to the terminal.
> + */
> +inline void dump_rx_status_queue(struct eth_device *dev)
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int i;
> +
> + printf("\ndump_rx_status_queue()\n");
> + printf(" descriptor address word1 word2\n");
> + for (i = 0; i < NUMRXDESC; i++) {
> + printf(" [ %08X ] %08X %08X\n",
> + (uint32_t)(priv->rx_sq.base + i),
> + (uint32_t)(priv->rx_sq.base + i)->word1,
> + (uint32_t)(priv->rx_sq.base + i)->word2);
>
word1 and word2 are defined as uint32_t, so no cast required.
> + }
> +}
> +
> +/**
> + * Dump all RX descriptor queue entries to the terminal.
> + */
> +inline void dump_rx_descriptor_queue(struct eth_device *dev)
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int i;
> +
> + printf("\ndump_rx_descriptor_queue()\n");
> + printf(" descriptor address word1 word2\n");
> + for (i = 0; i < NUMRXDESC; i++) {
> + printf(" [ %08X ] %08X %08X\n",
> + (uint32_t)(priv->rx_dq.base + i),
> + (uint32_t)(priv->rx_dq.base + i)->word1,
> + (uint32_t)(priv->rx_dq.base + i)->word2);
> + }
> +}
> +
> +/**
> + * Dump all TX descriptor queue entries to the terminal.
> + */
> +inline void dump_tx_descriptor_queue(struct eth_device *dev)
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int i;
> +
> + printf("\ndump_tx_descriptor_queue()\n");
> + printf(" descriptor address word1 word2\n");
> + for (i = 0; i < NUMTXDESC; i++) {
> + printf(" [ %08X ] %08X %08X\n",
> + (uint32_t)(priv->tx_dq.base + i),
> + (uint32_t)(priv->tx_dq.base + i)->word1,
> + (uint32_t)(priv->tx_dq.base + i)->word2);
> + }
> +}
> +
> +/**
> + * Dump all TX status queue entries to the terminal.
> + */
> +inline void dump_tx_status_queue(struct eth_device *dev)
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int i;
> +
> + printf("\ndump_tx_status_queue()\n");
> + printf(" descriptor address word1\n");
> + for (i = 0; i < NUMTXDESC; i++) {
> + printf(" [ %08X ] %08X\n",
> + (uint32_t)(priv->rx_sq.base + i),
> + (uint32_t)(priv->rx_sq.base + i)->word1);
> + }
> +}
> +#else
> +#define dump_dev(x)
> +#define dump_rx_descriptor_queue(x)
> +#define dump_rx_status_queue(x)
> +#define dump_tx_descriptor_queue(x)
> +#define dump_tx_status_queue(x)
> +#endif /* defined(EP93XX_MAC_DEBUG) */
> +
> +/**
> + * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
> + * it's cleared.
> + */
> +static void ep93xx_mac_reset(struct eth_device *dev)
> +{
> + struct mac_regs *mac = GET_REGS(dev);
> + uint32_t value;
> +
> + debug("+ep93xx_mac_reset");
> +
> + value = readl(&mac->selfctl);
> + value |= SELFCTL_RESET;
> + writel(value, &mac->selfctl);
> +
> + while (readl(&mac->selfctl) & SELFCTL_RESET)
> + ; /* noop */
> +
> + debug("-ep93xx_mac_reset");
> +}
> +
> +/* Eth device open */
> +static int ep93xx_eth_open(struct eth_device *dev, bd_t *bd)
> +{
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + struct mac_regs *mac = GET_REGS(dev);
> + uchar *mac_addr = dev->enetaddr;
> + int i;
> +
> + debug("+ep93xx_eth_open");
> +
> + /* Reset the MAC */
> + ep93xx_mac_reset(dev);
> +
> + /* Reset the descriptor queues' current and end address values */
> + priv->tx_dq.current = priv->tx_dq.base;
> + priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);
> +
> + priv->tx_sq.current = priv->tx_sq.base;
> + priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);
> +
> + priv->rx_dq.current = priv->rx_dq.base;
> + priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);
> +
> + priv->rx_sq.current = priv->rx_sq.base;
> + priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);
> +
> + /*
> + * Set the transmit descriptor and status queues' base address,
> + * current address, and length registers. Set the maximum frame
> + * length and threshold. Enable the transmit descriptor processor.
> + */
> + writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd);
> + writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd);
> + writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen);
> +
> + writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd);
> + writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd);
> + writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen);
> +
> + writel(0x00040000, &mac->txdthrshld);
> + writel(0x00040000, &mac->txststhrshld);
> +
> + writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen);
> + writel(BMCTL_TXEN, &mac->bmctl);
> +
> + /*
> + * Set the receive descriptor and status queues' base address,
> + * current address, and length registers. Enable the receive
> + * descriptor processor.
> + */
> + writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd);
> + writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd);
> + writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen);
> +
> + writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd);
> + writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd);
> + writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen);
> +
> + writel(0x00040000, &mac->rxdthrshld);
> +
> + writel(BMCTL_RXEN, &mac->bmctl);
> +
> + writel(0x00040000, &mac->rxststhrshld);
> +
> + /* Wait until the receive descriptor processor is active */
> + while (!(readl(&mac->bmsts) & BMSTS_RXACT))
> + ; /* noop */
> +
> + /*
> + * Initialize the RX descriptor queue. Clear the TX descriptor
> queue.
> + * Clear the RX and TX status queues. Enqueue the RX descriptor and
> + * status entries to the MAC.
> + */
> + for (i = 0; i < NUMRXDESC; i++) {
> + /* set buffer address */
> + (priv->rx_dq.base + i)->word1 = (uint32_t)NetRxPackets[i];
> +
> + /* set buffer length, clear buffer index and NSOF */
> + (priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
> + }
> +
> + memset(priv->tx_dq.base, 0,
> + (sizeof(struct tx_descriptor) * NUMTXDESC));
> + memset(priv->rx_sq.base, 0,
> + (sizeof(struct rx_status) * NUMRXDESC));
> + memset(priv->tx_sq.base, 0,
> + (sizeof(struct tx_status) * NUMTXDESC));
> +
> + writel(NUMRXDESC, &mac->rxdqenq);
> + writel(NUMRXDESC, &mac->rxstsqenq);
> +
> + /* Set the primary MAC address */
> + writel(AFP_IAPRIMARY, &mac->afp);
> + writel(mac_addr[0] | (mac_addr[1] << 8) |
> + (mac_addr[2] << 16) | (mac_addr[3] << 24),
> + &mac->indad);
> + writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper);
> +
> + /* Turn on RX and TX */
> + writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
> + RXCTL_RCRCA | RXCTL_MA, &mac->rxctl);
> + writel(TXCTL_STXON, &mac->txctl);
> +
> + /* Dump data structures if we're debugging */
> + dump_dev(dev);
> + dump_rx_descriptor_queue(dev);
> + dump_rx_status_queue(dev);
> + dump_tx_descriptor_queue(dev);
> + dump_tx_status_queue(dev);
> +
> + debug("-ep93xx_eth_open");
> +
> + return 1;
> +}
> +
> +/**
> + * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
> + * registers.
> + */
> +static void ep93xx_eth_close(struct eth_device *dev)
> +{
> + struct mac_regs *mac = GET_REGS(dev);
> +
> + debug("+ep93xx_eth_close");
> +
> + writel(0x00000000, &mac->rxctl);
> + writel(0x00000000, &mac->txctl);
> +
> + debug("-ep93xx_eth_close");
> +}
> +
> +/**
> + * Copy a frame of data from the MAC into the protocol layer for further
> + * processing.
> + */
> +static int ep93xx_eth_rcv_packet(struct eth_device *dev)
> +{
> + struct mac_regs *mac = GET_REGS(dev);
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int len = -1;
> +
> + debug("+ep93xx_eth_rcv_packet");
> +
> + if (RX_STATUS_RFP(priv->rx_sq.current)) {
> + if (RX_STATUS_RWE(priv->rx_sq.current)) {
> + /*
> + * We have a good frame. Extract the frame's length
> + * from the current rx_status_queue entry, and copy
> + * the frame's data into NetRxPackets[] of the
> + * protocol stack. We track the total number of
> + * bytes in the frame (nbytes_frame) which will be
> + * used when we pass the data off to the protocol
> + * layer via NetReceive().
> + */
> + len = RX_STATUS_FRAME_LEN(priv->rx_sq.current);
> +
> + NetReceive((uchar *)priv->rx_dq.current->word1,
> len);
> +
> + debug("reporting %d bytes...\n", len);
> + } else {
> + /* Do we have an erroneous packet? */
> + error("packet rx error, status %08X %08X",
> + priv->rx_sq.current->word1,
> + priv->rx_sq.current->word2);
> + dump_rx_descriptor_queue(dev);
> + dump_rx_status_queue(dev);
> + }
> +
> + /*
> + * Clear the associated status queue entry, and
> + * increment our current pointers to the next RX
> + * descriptor and status queue entries (making sure
> + * we wrap properly).
> + */
> + memset((void *)priv->rx_sq.current, 0,
> + sizeof(struct rx_status));
> +
> + priv->rx_sq.current++;
> + if (priv->rx_sq.current >= priv->rx_sq.end)
> + priv->rx_sq.current = priv->rx_sq.base;
> +
> + priv->rx_dq.current++;
> + if (priv->rx_dq.current >= priv->rx_dq.end)
> + priv->rx_dq.current = priv->rx_dq.base;
> +
> + /*
> + * Finally, return the RX descriptor and status entries
> + * back to the MAC engine, and loop again, checking for
> + * more descriptors to process.
> + */
> + writel(1, &mac->rxdqenq);
> + writel(1, &mac->rxstsqenq);
> + } else {
> + len = 0;
> + }
> +
> + debug("-ep93xx_eth_rcv_packet %d", len);
> + return len;
> +}
> +
> +/**
> + * Send a block of data via ethernet.
> + */
> +static int ep93xx_eth_send_packet(struct eth_device *dev,
> + volatile void * const packet, int const
> length)
> +{
> + struct mac_regs *mac = GET_REGS(dev);
> + struct ep93xx_priv *priv = GET_PRIV(dev);
> + int ret = -1;
> +
> + debug("+ep93xx_eth_send_packet");
> +
> + /* Parameter check */
> + BUG_ON(packet == NULL);
> +
> + /*
> + * Initialize the TX descriptor queue with the new packet's info.
> + * Clear the associated status queue entry. Enqueue the packet
> + * to the MAC for transmission.
> + */
> +
> + /* set buffer address */
> + priv->tx_dq.current->word1 = (uint32_t)packet;
> +
> + /* set buffer length and EOF bit */
> + priv->tx_dq.current->word2 = length | TX_DESC_EOF;
> +
> + /* clear tx status */
> + priv->tx_sq.current->word1 = 0;
> +
> + /* enqueue the TX descriptor */
> + writel(1, &mac->txdqenq);
> +
> + /* wait for the frame to become processed */
> + while (!TX_STATUS_TXFP(priv->tx_sq.current))
> + ; /* noop */
> +
> + if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
> + error("packet tx error, status %08X",
> + priv->tx_sq.current->word1);
> + dump_tx_descriptor_queue(dev);
> + dump_tx_status_queue(dev);
> +
> + /* TODO: Add better error handling? */
> + goto eth_send_failed_0;
> + }
> +
> + ret = 0;
> + /* Fall through */
> +
> +eth_send_failed_0:
>
Strange label here. This isn't just a fail path.
> + debug("-ep93xx_eth_send_packet %d", ret);
> + return ret;
> +}
> +
> +#if defined(CONFIG_MII)
> +int ep93xx_miiphy_initialize(bd_t * const bd)
> +{
> + miiphy_register("ep93xx_eth0", ep93xx_miiphy_read,
> ep93xx_miiphy_write);
> + return 0;
> +}
> +#endif
> +
> +/**
> + * Initialize the EP93xx MAC. The MAC hardware is reset. Buffers are
> + * allocated, if necessary, for the TX and RX descriptor and status
> queues,
> + * as well as for received packets. The EP93XX MAC hardware is
> initialized.
> + * Transmit and receive operations are enabled.
> + */
> +int ep93xx_eth_initialize(u8 dev_num, int base_addr)
> +{
> + int ret = -1;
> + struct eth_device *dev;
> + struct ep93xx_priv *priv;
> +
> + debug("+ep93xx_eth_initialize");
> +
> + priv = malloc(sizeof(*priv));
> + if (!priv) {
> + error("malloc() failed");
> + goto eth_init_failed_0;
> + }
> + memset(priv, 0, sizeof(*priv));
> +
> + priv->regs = (struct mac_regs *)base_addr;
> +
> + priv->tx_dq.base = calloc(NUMTXDESC,
> + sizeof(struct tx_descriptor));
> + if (priv->tx_dq.base == NULL) {
> + error("calloc() failed");
> + goto eth_init_failed_1;
> + }
> +
> + priv->tx_sq.base = calloc(NUMTXDESC,
> + sizeof(struct tx_status));
> + if (priv->tx_sq.base == NULL) {
> + error("calloc() failed");
> + goto eth_init_failed_2;
> + }
> +
> + priv->rx_dq.base = calloc(NUMRXDESC,
> + sizeof(struct rx_descriptor));
> + if (priv->rx_dq.base == NULL) {
> + error("calloc() failed");
> + goto eth_init_failed_3;
> + }
> +
> + priv->rx_sq.base = calloc(NUMRXDESC,
> + sizeof(struct rx_status));
> + if (priv->rx_sq.base == NULL) {
> + error("calloc() failed");
> + goto eth_init_failed_4;
> + }
> +
> + dev = malloc(sizeof *dev);
> + if (dev == NULL) {
> + error("malloc() failed");
> + goto eth_init_failed_5;
> + }
> + memset(dev, 0, sizeof *dev);
> +
> + dev->iobase = base_addr;
> + dev->priv = priv;
> + dev->init = ep93xx_eth_open;
> + dev->halt = ep93xx_eth_close;
> + dev->send = ep93xx_eth_send_packet;
> + dev->recv = ep93xx_eth_rcv_packet;
> +
> + sprintf(dev->name, "ep93xx_eth-%hu", dev_num);
> +
> + eth_register(dev);
> +
> + /* Done! */
> + ret = 0;
>
Remember, -1 means critical error, 0 means non-critical error and >0 means #
of devices initialized. I expect you want this to be '1'.
> + goto eth_init_done;
> +
> +eth_init_failed_5:
> + free(priv->rx_sq.base);
> + /* Fall through */
> +
> +eth_init_failed_4:
> + free(priv->rx_dq.base);
> + /* Fall through */
> +
> +eth_init_failed_3:
> + free(priv->tx_sq.base);
> + /* Fall through */
> +
> +eth_init_failed_2:
> + free(priv->tx_dq.base);
> + /* Fall through */
> +
> +eth_init_failed_1:
> + free(priv);
> + /* Fall through */
> +
> +eth_init_failed_0:
> + /* Fall through */
> +
> +eth_init_done:
> + debug("-ep93xx_eth_initialize %d", ret);
> + return ret;
> +}
> +
> +#if defined(CONFIG_MII)
> +
> +/**
> + * Maximum MII address we support
> + */
> +#define MII_ADDRESS_MAX 31
> +
> +/**
> + * Maximum MII register address we support
> + */
> +#define MII_REGISTER_MAX 31
> +
> +/**
> + * Read a 16-bit value from an MII register.
> + */
> +static int ep93xx_miiphy_read(char * const dev, unsigned char const addr,
> + unsigned char const reg, unsigned short * const
> value)
> +{
> + struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
> + int ret = -1;
> + uint32_t self_ctl;
> +
> + debug("+ep93xx_miiphy_read");
> +
> + /* Parameter checks */
> + BUG_ON(dev == NULL);
> + BUG_ON(addr > MII_ADDRESS_MAX);
> + BUG_ON(reg > MII_REGISTER_MAX);
> + BUG_ON(value == NULL);
> +
> + /*
> + * Save the current SelfCTL register value. Set MAC to suppress
> + * preamble bits. Wait for any previous MII command to complete
> + * before issuing the new command.
> + */
> + self_ctl = readl(&mac->selfctl);
> +#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
> + writel(self_ctl & ~(1 << 8), &mac->selfctl);
> +#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
> +
> + while (readl(&mac->miists) & MIISTS_BUSY)
> + ; /* noop */
> +
> + /*
> + * Issue the MII 'read' command. Wait for the command to complete.
> + * Read the MII data value.
> + */
> + writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg,
> + &mac->miicmd);
> + while (readl(&mac->miists) & MIISTS_BUSY)
> + ; /* noop */
> +
> + *value = (unsigned short)readl(&mac->miidata);
> +
> + /* Restore the saved SelfCTL value and return. */
> + writel(self_ctl, &mac->selfctl);
> +
> + ret = 0;
> + /* Fall through */
> +
> + debug("-ep93xx_miiphy_read");
> + return ret;
> +}
> +
> +/**
> + * Write a 16-bit value to an MII register.
> + */
> +static int ep93xx_miiphy_write(char * const dev, unsigned char const addr,
> + unsigned char const reg, unsigned short const
> value)
> +{
> + struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
> + int ret = -1;
> + uint32_t self_ctl;
> +
> + debug("+ep93xx_miiphy_write");
> +
> + /* Parameter checks */
> + BUG_ON(dev == NULL);
> + BUG_ON(addr > MII_ADDRESS_MAX);
> + BUG_ON(reg > MII_REGISTER_MAX);
> +
> + /*
> + * Save the current SelfCTL register value. Set MAC to suppress
> + * preamble bits. Wait for any previous MII command to complete
> + * before issuing the new command.
> + */
> + self_ctl = readl(&mac->selfctl);
> +#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
> + writel(self_ctl & ~(1 << 8), &mac->selfctl);
> +#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
> +
> + while (readl(&mac->miists) & MIISTS_BUSY)
> + ; /* noop */
> +
> + /* Issue the MII 'write' command. Wait for the command to
> complete. */
> + writel((uint32_t)value, &mac->miidata);
> + writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg,
> + &mac->miicmd);
> + while (readl(&mac->miists) & MIISTS_BUSY)
> + ; /* noop */
> +
> + /* Restore the saved SelfCTL value and return. */
> + writel(self_ctl, &mac->selfctl);
> +
> + ret = 0;
> + /* Fall through */
> +
> + debug("-ep93xx_miiphy_write");
> + return ret;
> +}
> +#endif /* defined(CONFIG_MII) */
> diff --git a/drivers/net/ep93xx_eth.h b/drivers/net/ep93xx_eth.h
> new file mode 100644
> index 0000000..5f7bf13
> --- /dev/null
> +++ b/drivers/net/ep93xx_eth.h
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
> + *
> + * Copyright (C) 2004, 2005
> + * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef _ETH_H
> +#define _ETH_H
>
This should have a more specific namespace
> +
> +#include <net.h>
> +
> +/**
> + * #define this to dump device status and queue info during initialization
> and
> + * following errors.
> + */
> +#undef EP93XX_MAC_DEBUG
> +
> +/**
> + * Number of descriptor and status entries in our RX queues.
> + * It must be power of 2 !
> + */
> +#define NUMRXDESC PKTBUFSRX
> +
> +/**
> + * Number of descriptor and status entries in our TX queues.
> + */
> +#define NUMTXDESC 1
> +
> +/**
> + * 944 = (1024 - 64) - 16, Fifo size - Minframesize - 16 (Chip FACT)
> + */
> +#define TXSTARTMAX 944
> +
> +/**
> + * Receive descriptor queue entry
> + */
> +struct rx_descriptor {
> + uint32_t word1;
> + uint32_t word2;
> +};
> +
> +/**
> + * Receive status queue entry
> + */
> +struct rx_status {
> + uint32_t word1;
> + uint32_t word2;
> +};
> +
> +#define RX_STATUS_RWE(rx_status) ((rx_status->word1 >> 30) & 0x01)
> +#define RX_STATUS_RFP(rx_status) ((rx_status->word1 >> 31) & 0x01)
> +#define RX_STATUS_FRAME_LEN(rx_status) (rx_status->word2 & 0xFFFF)
> +
> +/**
> + * Transmit descriptor queue entry
> + */
> +struct tx_descriptor {
> + uint32_t word1;
> + uint32_t word2;
> +};
> +
> +#define TX_DESC_EOF (1 << 31)
> +
> +/**
> + * Transmit status queue entry
> + */
> +struct tx_status {
> + uint32_t word1;
> +};
> +
> +#define TX_STATUS_TXWE(tx_status) (((tx_status)->word1 >> 30) & 0x01)
> +#define TX_STATUS_TXFP(tx_status) (((tx_status)->word1 >> 31) & 0x01)
> +
> +/**
> + * Transmit descriptor queue
> + */
> +struct tx_descriptor_queue {
> + struct tx_descriptor *base;
> + struct tx_descriptor *current;
> + struct tx_descriptor *end;
> +};
> +
> +/**
> + * Transmit status queue
> + */
> +struct tx_status_queue {
> + struct tx_status *base;
> + volatile struct tx_status *current;
> + struct tx_status *end;
> +};
> +
> +/**
> + * Receive descriptor queue
> + */
> +struct rx_descriptor_queue {
> + struct rx_descriptor *base;
> + struct rx_descriptor *current;
> + struct rx_descriptor *end;
> +};
> +
> +/**
> + * Receive status queue
> + */
> +struct rx_status_queue {
> + struct rx_status *base;
> + volatile struct rx_status *current;
> + struct rx_status *end;
> +};
> +
> +/**
> + * EP93xx MAC private data structure
> + */
> +struct ep93xx_priv {
> + struct rx_descriptor_queue rx_dq;
> + struct rx_status_queue rx_sq;
> + void *rx_buffer[NUMRXDESC];
> +
> + struct tx_descriptor_queue tx_dq;
> + struct tx_status_queue tx_sq;
> +
> + struct mac_regs *regs;
> +};
> +
> +#endif
> diff --git a/include/common.h b/include/common.h
> index f2a7067..c0dfc45 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -123,6 +123,11 @@ typedef volatile unsigned char vu_char;
> #define debugX(level,fmt,args...)
> #endif /* DEBUG */
>
> +#define error(fmt, args...) do { \
> + printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
> + ##args, __FILE__, __LINE__, __func__); \
> +} while (0)
> +
> #ifndef BUG
> #define BUG() do { \
> printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__,
> __FUNCTION__); \
> diff --git a/include/netdev.h b/include/netdev.h
> index a9d5ec9..1e0484f 100644
> --- a/include/netdev.h
> +++ b/include/netdev.h
> @@ -49,6 +49,7 @@ int davinci_emac_initialize(void);
> int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
> int e1000_initialize(bd_t *bis);
> int eepro100_initialize(bd_t *bis);
> +int ep93xx_eth_initialize(u8 dev_num, int base_addr);
> int eth_3com_initialize (bd_t * bis);
> int fec_initialize (bd_t *bis);
> int fecmxc_initialize (bd_t *bis);
>
regards,
Ben
More information about the U-Boot
mailing list