[PATCH] Enable I2C bus switching

[Syed Mohammed Khasim]

OMAP3 supports Multiple I2C channels, this patch allows
us to use i2c dev <bus no> command to switch between busses.

Signed-off-by: Syed Mohammed Khasim <khasim at ti.com>
Acked-by: Heiko Schocher <hs at denx.de>
---
 drivers/i2c/omap24xx_i2c.c     |    5 +++++
 include/configs/omap3_beagle.h |    4 ++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ff18991..e8c8184 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -435,3 +435,8 @@ int i2c_set_bus_num(unsigned int bus)

 	return 0;
 }
+
+int i2c_get_bus_num(void)
+{
+	return (int) current_bus;
+}
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index d1c9cd0..ff6d432 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -100,6 +100,10 @@
 /* DDR - I use Micron DDR */
 #define CONFIG_OMAP3_MICRON_DDR		1

+/* Enable Multi Bus support for I2C */
+#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_SYS_I2C_NOPROBES		{0x0, 0x0}
+
 /* commands to include */
 #include <config_cmd_default.h>

-- 
1.5.6.3