[U-Boot] 83xx, uec: adjust enet_interface settings on the fly.

Heiko Schocher hs at denx.de
Fri Jan 8 08:37:53 CET 2010


Hello Liu,

Liu Dave-R63238 wrote:
>> did you make any effort to refactor this into the existing 
>> eth_type == GIGA_ETH code?  I'm not sure why that code became 
>> conditional in commit 
>> 24c3aca3f1358b113d3215adb5433b156e99f72b "mpc83xx: Add 
>> support for the MPC832XEMDS board" in the first place - Dave?
> 
> I don't remember why I added the eth_type==GIGA_ETH condition.
> If it is possible, please refactor it as Kim.

Hmm.. while looking at this code, a question comes in mind:
Did this code (eth_type==GIGA_ETH) work correctly?

I see there is a switching possible from 1000 to 100 or 10, but
never back to 1000, because the 1000 case did nothing ...?
Is this intentionally?

Also uec->uec_info->enet_interface is never updated, which should
be done ... or?

If the above mentioned is no problem, following patch comes
in my mind:

If using UCC as Ethernet Controller and type = FAST_ETH, it was
not possible to switch between 10 and 100 MBit interfaces. This
patch adds this for following interfaces:

10_MII
10_RMII
10_RGMII
100_MII
100_RMII
100_RGMII

Signed-off-by: Heiko Schocher <hs at denx.de>
---
 drivers/qe/uec.c |  104 ++++++++++++++++++++++++++++++++++++++++-------------
 1 files changed, 78 insertions(+), 26 deletions(-)

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index db95ada..263df9c 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -65,6 +65,22 @@ static uec_info_t uec_info[] = {

 #define MAXCONTROLLERS	(8)

+static char *enet_interface_name[] = {
+	"10_MII",
+	"10_RMII",
+	"10_RGMII",
+	"100_MII",
+	"100_RMII",
+	"100_RGMII",
+	"1000_GMII",
+	"1000_RGMII",
+	"1000_RGMII_ID",
+	"1000_RGMII_RXID",
+	"1000_TBI",
+	"1000_RTBI",
+	"1000_SGMII"
+};
+
 static struct eth_device *devlist[MAXCONTROLLERS];

 u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
@@ -497,6 +513,66 @@ bus_fail:
 	return err;
 }

+static  void adjust_enet_interface_speed(int speed, struct eth_device *dev)
+{
+	uec_private_t	*uec = (uec_private_t *)dev->priv;
+	uec_t		*uec_regs;
+	int		change = 0;
+
+	extern void change_phy_interface_mode(struct eth_device *dev,
+					 enet_interface_e mode);
+	uec_regs = uec->uec_regs;
+
+	switch (speed) {
+	case 1000:
+		break;
+	case 100:
+		switch (uec->uec_info->enet_interface) {
+		case ENET_10_MII:
+		case ENET_10_RMII:
+		case ENET_10_RGMII:
+			uec->uec_info->enet_interface += 3;
+			change = 1;
+			break;
+		default:
+			uec->uec_info->enet_interface = ENET_100_RGMII;
+			change = 1;
+			break;
+		}
+		break;
+	case 10:
+		switch (uec->uec_info->enet_interface) {
+		case ENET_100_MII:
+		case ENET_100_RMII:
+		case ENET_100_RGMII:
+			uec->uec_info->enet_interface -= 3;
+			change = 1;
+			break;
+		default:
+			uec->uec_info->enet_interface = ENET_10_RGMII;
+			change = 1;
+			break;
+		}
+		break;
+	default:
+		/* do nothing, not supported yet */
+		printf("%s: speed: %d and mode: %d not supported yet.\n",
+			__func__, speed, uec->uec_info->enet_interface);
+		break;
+	}
+	if (change) {
+		printf ("switching to %s\n",
+			enet_interface_name[uec->uec_info->enet_interface]);
+		/* change phy */
+		change_phy_interface_mode(dev,
+			uec->uec_info->enet_interface);
+		/* change the MAC interface mode */
+		uec_set_mac_if_mode(uec,
+			uec->uec_info->enet_interface);
+
+	}
+}
+
 static void adjust_link(struct eth_device *dev)
 {
 	uec_private_t		*uec = (uec_private_t *)dev->priv;
@@ -522,32 +598,7 @@ static void adjust_link(struct eth_device *dev)
 		}

 		if (mii_info->speed != uec->oldspeed) {
-			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
-				switch (mii_info->speed) {
-				case 1000:
-					break;
-				case 100:
-					printf ("switching to rgmii 100\n");
-					/* change phy to rgmii 100 */
-					change_phy_interface_mode(dev,
-								ENET_100_RGMII);
-					/* change the MAC interface mode */
-					uec_set_mac_if_mode(uec,ENET_100_RGMII);
-					break;
-				case 10:
-					printf ("switching to rgmii 10\n");
-					/* change phy to rgmii 10 */
-					change_phy_interface_mode(dev,
-								ENET_10_RGMII);
-					/* change the MAC interface mode */
-					uec_set_mac_if_mode(uec,ENET_10_RGMII);
-					break;
-				default:
-					printf("%s: Ack,Speed(%d)is illegal\n",
-						dev->name, mii_info->speed);
-					break;
-				}
-			}
+			adjust_enet_interface_speed(mii_info->speed, dev);

 			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
 			uec->oldspeed = mii_info->speed;
@@ -1215,6 +1266,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 		if (err || i <= 0)
 			printf("warning: %s: timeout on PHY link\n", dev->name);

+		adjust_link(dev);
 		uec->the_first_run = 1;
 	}

-- 
1.6.2.5

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list