[U-Boot] [PATCH V2 7/9] fsl_esdhc: add support for mx51 processor
Stefano Babic
sbabic at denx.de
Wed Jan 13 10:50:57 CET 2010
The esdhc controller in the mx51 processor is quite
the same as the one in some powerpc processors
(MPC83xx, MPC85xx). This patches adapts the driver
to support the arm mx51.
Signed-off-by: Stefano Babic <sbabic at denx.de>
---
drivers/mmc/fsl_esdhc.c | 72 +++++++++++++++++++++++++++++++++++++++-------
include/asm-arm/io.h | 21 +++++++++++++
include/fsl_esdhc.h | 6 +++-
include/mmc.h | 1 +
4 files changed, 88 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c6e9e6e..d9574d0 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -37,6 +37,10 @@
#include <fdt_support.h>
#include <asm/io.h>
+#ifndef CONFIG_PPC
+#define out_be32(a, v) writel(v, a)
+#define in_be32(a) __raw_readl(a)
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -129,7 +133,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
out_be32(®s->blkattr, data->blocks << 16 | data->blocksize);
/* Calculate the timeout period for data transactions */
- timeout = __ilog2(mmc->tran_speed/10);
+ timeout = fls(mmc->tran_speed/10) - 1;
timeout -= 13;
if (timeout > 14)
@@ -236,11 +240,18 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
void set_sysctl(struct mmc *mmc, uint clock)
{
+#ifdef CONFIG_PPC
int sdhc_clk = gd->sdhc_clk;
+#else
+ int sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
+#endif
int div, pre_div;
volatile struct fsl_esdhc *regs = mmc->priv;
uint clk;
+ if (clock < mmc->f_min)
+ clock = mmc->f_min;
+
if (sdhc_clk / 16 > clock) {
for (pre_div = 2; pre_div < 256; pre_div *= 2)
if ((sdhc_clk / pre_div) <= (clock * 16))
@@ -257,11 +268,14 @@ void set_sysctl(struct mmc *mmc, uint clock)
clk = (pre_div << 8) | (div << 4);
+ /* On imx the clock must be stopped before changing frequency */
+ clrbits_be32(®s->sysctl, SYSCTL_CKEN);
+
clrsetbits_be32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
udelay(10000);
- setbits_be32(®s->sysctl, SYSCTL_PEREN);
+ setbits_be32(®s->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
}
static void esdhc_set_ios(struct mmc *mmc)
@@ -278,15 +292,26 @@ static void esdhc_set_ios(struct mmc *mmc)
setbits_be32(®s->proctl, PROCTL_DTW_4);
else if (mmc->bus_width == 8)
setbits_be32(®s->proctl, PROCTL_DTW_8);
+
}
static int esdhc_init(struct mmc *mmc)
{
struct fsl_esdhc *regs = mmc->priv;
int timeout = 1000;
+ int ret = 0;
+#ifdef CONFIG_PPC
/* Enable cache snooping */
out_be32(®s->scr, 0x00000040);
+#endif
+
+ /* Reset the entire host controller */
+ out_be32(®s->sysctl, SYSCTL_RSTA);
+
+ /* Wait until the controller is available */
+ while ((in_be32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
+ udelay(1000);
out_be32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
@@ -299,24 +324,44 @@ static int esdhc_init(struct mmc *mmc)
/* Put the PROCTL reg back to the default */
out_be32(®s->proctl, PROCTL_INIT);
- while (!(in_be32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
- udelay(1000);
+ /* Set timout to the maximum value */
+ clrsetbits_be32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
- if (timeout <= 0)
- return NO_CARD_ERR;
+ /* Check if there is a callback for detecting the card */
+ if (!mmc->getcd) {
+ timeout = 1000;
+ while (!(in_be32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
+ udelay(1000);
- return 0;
+ if (timeout <= 0)
+ ret = NO_CARD_ERR;
+ } else {
+ if (mmc->getcd(mmc))
+ ret = NO_CARD_ERR;
+ }
+
+ return ret;
}
-static int esdhc_initialize(bd_t *bis)
+int fsl_esdhc_initialize(bd_t *bis, uint32_t esdhc_addr,
+ int (*getcd)(struct mmc *mmc))
{
- struct fsl_esdhc *regs = (struct fsl_esdhc *)CONFIG_SYS_FSL_ESDHC_ADDR;
+#ifdef CONFIG_PPC
+ int sdhc_clk = gd->sdhc_clk;
+#else
+ int sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
+#endif
+ struct fsl_esdhc *regs;
struct mmc *mmc;
u32 caps;
mmc = malloc(sizeof(struct mmc));
sprintf(mmc->name, "FSL_ESDHC");
+ regs = (struct fsl_esdhc *)CONFIG_SYS_FSL_ESDHC_ADDR;
+ if (esdhc_addr)
+ regs = (struct fsl_esdhc *)esdhc_addr;
+
mmc->priv = regs;
mmc->send_cmd = esdhc_send_cmd;
mmc->set_ios = esdhc_set_ios;
@@ -337,7 +382,10 @@ static int esdhc_initialize(bd_t *bis)
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
mmc->f_min = 400000;
- mmc->f_max = MIN(gd->sdhc_clk, 50000000);
+ mmc->f_max = MIN(sdhc_clk, 50000000);
+
+ if (getcd)
+ mmc->getcd = getcd;
mmc_register(mmc);
@@ -346,9 +394,10 @@ static int esdhc_initialize(bd_t *bis)
int fsl_esdhc_mmc_init(bd_t *bis)
{
- return esdhc_initialize(bis);
+ return fsl_esdhc_initialize(bis, 0, NULL);
}
+#ifdef CONFIG_PPC
void fdt_fixup_esdhc(void *blob, bd_t *bd)
{
const char *compat = "fsl,esdhc";
@@ -365,3 +414,4 @@ out:
do_fixup_by_compat(blob, compat, "status", status,
strlen(status) + 1, 1);
}
+#endif
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index fec3a7e..fb104aa 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -33,6 +33,27 @@ static inline void sync(void)
{
}
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+ write##type(__raw_read##type(addr) & ~(clear), (addr))
+
+#define setbits(type, addr, set) \
+ write##type(__raw_read##type(addr) | (set), (addr))
+
+#define clrsetbits(type, addr, clear, set) \
+ write##type((__raw_read##type(addr) & ~(clear)) | (set), (addr))
+
+#define clrbits_be32(addr, clear) clrbits(l, addr, clear)
+#define setbits_be32(addr, set) setbits(l, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(l, addr, clear, set)
+
+
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 89b8304..605e065 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -32,7 +32,9 @@
#define SYSCTL 0x0002e02c
#define SYSCTL_INITA 0x08000000
#define SYSCTL_TIMEOUT_MASK 0x000f0000
-#define SYSCTL_CLOCK_MASK 0x00000fff
+#define SYSCTL_CLOCK_MASK 0x0000ffff
+#define SYSCTL_RSTA 0x01000000
+#define SYSCTL_CKEN 0x00000008
#define SYSCTL_PEREN 0x00000004
#define SYSCTL_HCKEN 0x00000002
#define SYSCTL_IPGEN 0x00000001
@@ -144,6 +146,8 @@
#ifdef CONFIG_FSL_ESDHC
int fsl_esdhc_mmc_init(bd_t *bis);
+int fsl_esdhc_initialize(bd_t *bis, uint32_t esdhc_addr,
+ int (*getcd)(struct mmc *mmc));
void fdt_fixup_esdhc(void *blob, bd_t *bd);
#else
static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
diff --git a/include/mmc.h b/include/mmc.h
index 2dc69ab..bc29953 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -264,6 +264,7 @@ struct mmc {
struct mmc_cmd *cmd, struct mmc_data *data);
void (*set_ios)(struct mmc *mmc);
int (*init)(struct mmc *mmc);
+ int (*getcd)(struct mmc *mmc);
};
int mmc_register(struct mmc *mmc);
--
1.6.3.3
More information about the U-Boot
mailing list