[U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board

[Tom]

SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar at st.com>
---
  MAKEALL                         |    1 +
  Makefile                        |    1 +
  board/spear/spear300/Makefile   |   51 ++++++++++++++++++++++++++++++++++
  board/spear/spear300/config.mk  |   39 ++++++++++++++++++++++++++
  board/spear/spear300/spear300.c |   57 +++++++++++++++++++++++++++++++++++++++
  include/configs/spear.h         |   25 +++++++++++++++--
  6 files changed, 171 insertions(+), 3 deletions(-)
  create mode 100755 board/spear/spear300/Makefile
  create mode 100755 board/spear/spear300/config.mk
  create mode 100755 board/spear/spear300/spear300.c

<snip>
diff --git a/include/configs/spear.h b/include/configs/spear.h
index a625c31..15a8241 100755
--- a/include/configs/spear.h
+++ b/include/configs/spear.h
@@ -28,7 +28,12 @@
   * High Level Configuration Options
   * (easy to change)
   */
+#if defined(CONFIG_MK_spear600)
  #define CONFIG_SPEAR600				1
+#elif defined(CONFIG_MK_spear300)
+#define CONFIG_SPEAR3XX				1
+#define CONFIG_SPEAR300				1
+#endif

There should be a config file per board.
The common parts can be kept in a separate file
So the should be 'spear300.h' etc.

Tom