[U-Boot] [PATCH V4 10/11] fsl_esdhc: add support for mx51 processor

Stefano Babic sbabic at denx.de
Tue Jan 26 14:44:10 CET 2010


The esdhc controller in the mx51 processor is quite
the same as the one in some powerpc processors
(MPC83xx, MPC85xx). This patches adapts the driver
to support the arm mx51.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 cpu/arm_cortexa8/mx51/Makefile |    2 +-
 cpu/arm_cortexa8/mx51/speed.c  |   38 ++++++++++
 drivers/mmc/fsl_esdhc.c        |  153 +++++++++++++++++++++++++++-------------
 include/asm-arm/global_data.h  |    3 +
 include/fsl_esdhc.h            |   11 +++-
 lib_arm/board.c                |    3 +
 6 files changed, 159 insertions(+), 51 deletions(-)
 create mode 100644 cpu/arm_cortexa8/mx51/speed.c

diff --git a/cpu/arm_cortexa8/mx51/Makefile b/cpu/arm_cortexa8/mx51/Makefile
index 4d82293..7cfaa2c 100644
--- a/cpu/arm_cortexa8/mx51/Makefile
+++ b/cpu/arm_cortexa8/mx51/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= soc.o clock.o iomux.o timer.o
+COBJS	= soc.o clock.o iomux.o timer.o speed.o
 SOBJS = lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm_cortexa8/mx51/speed.c b/cpu/arm_cortexa8/mx51/speed.c
new file mode 100644
index 0000000..10acbbf
--- /dev/null
+++ b/cpu/arm_cortexa8/mx51/speed.c
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+
+int get_clocks(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_FSL_ESDHC
+	gd->sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
+#endif
+	return 0;
+}
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c6e9e6e..d8095d3 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -37,7 +37,6 @@
 #include <fdt_support.h>
 #include <asm/io.h>
 
-
 DECLARE_GLOBAL_DATA_PTR;
 
 struct fsl_esdhc {
@@ -102,7 +101,8 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 {
 	uint wml_value;
 	int timeout;
-	struct fsl_esdhc *regs = mmc->priv;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 
 	wml_value = data->blocksize/4;
 
@@ -112,24 +112,24 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 
 		wml_value = 0x100000 | wml_value;
 
-		out_be32(&regs->dsaddr, (u32)data->dest);
+		iowrite32(&regs->dsaddr, (u32)data->dest);
 	} else {
 		if (wml_value > 0x80)
 			wml_value = 0x80;
-		if ((in_be32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
+		if ((ioread32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
 			printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
 			return TIMEOUT;
 		}
 		wml_value = wml_value << 16 | 0x10;
-		out_be32(&regs->dsaddr, (u32)data->src);
+		iowrite32(&regs->dsaddr, (u32)data->src);
 	}
 
-	out_be32(&regs->wml, wml_value);
+	iowrite32(&regs->wml, wml_value);
 
-	out_be32(&regs->blkattr, data->blocks << 16 | data->blocksize);
+	iowrite32(&regs->blkattr, data->blocks << 16 | data->blocksize);
 
 	/* Calculate the timeout period for data transactions */
-	timeout = __ilog2(mmc->tran_speed/10);
+	timeout = fls(mmc->tran_speed/10) - 1;
 	timeout -= 13;
 
 	if (timeout > 14)
@@ -138,7 +138,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 	if (timeout < 0)
 		timeout = 0;
 
-	clrsetbits_be32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
+	clrsetbits_reg32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
 
 	return 0;
 }
@@ -153,17 +153,20 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 {
 	uint	xfertyp;
 	uint	irqstat;
-	volatile struct fsl_esdhc *regs = mmc->priv;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 
-	out_be32(&regs->irqstat, -1);
+	iowrite32(&regs->irqstat, -1);
 
 	sync();
 
 	/* Wait for the bus to be idle */
-	while ((in_be32(&regs->prsstat) & PRSSTAT_CICHB) ||
-			(in_be32(&regs->prsstat) & PRSSTAT_CIDHB));
+	while ((ioread32(&regs->prsstat) & PRSSTAT_CICHB) ||
+			(ioread32(&regs->prsstat) & PRSSTAT_CIDHB))
+		;
 
-	while (in_be32(&regs->prsstat) & PRSSTAT_DLA);
+	while (ioread32(&regs->prsstat) & PRSSTAT_DLA)
+		;
 
 	/* Wait at least 8 SD clock cycles before the next command */
 	/*
@@ -185,14 +188,15 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 	xfertyp = esdhc_xfertyp(cmd, data);
 
 	/* Send the command */
-	out_be32(&regs->cmdarg, cmd->cmdarg);
-	out_be32(&regs->xfertyp, xfertyp);
+	iowrite32(&regs->cmdarg, cmd->cmdarg);
+	iowrite32(&regs->xfertyp, xfertyp);
 
 	/* Wait for the command to complete */
-	while (!(in_be32(&regs->irqstat) & IRQSTAT_CC));
+	while (!(ioread32(&regs->irqstat) & IRQSTAT_CC))
+		;
 
-	irqstat = in_be32(&regs->irqstat);
-	out_be32(&regs->irqstat, irqstat);
+	irqstat = ioread32(&regs->irqstat);
+	iowrite32(&regs->irqstat, irqstat);
 
 	if (irqstat & CMD_ERR)
 		return COMM_ERR;
@@ -204,21 +208,21 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 	if (cmd->resp_type & MMC_RSP_136) {
 		u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
 
-		cmdrsp3 = in_be32(&regs->cmdrsp3);
-		cmdrsp2 = in_be32(&regs->cmdrsp2);
-		cmdrsp1 = in_be32(&regs->cmdrsp1);
-		cmdrsp0 = in_be32(&regs->cmdrsp0);
+		cmdrsp3 = ioread32(&regs->cmdrsp3);
+		cmdrsp2 = ioread32(&regs->cmdrsp2);
+		cmdrsp1 = ioread32(&regs->cmdrsp1);
+		cmdrsp0 = ioread32(&regs->cmdrsp0);
 		cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
 		cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
 		cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
 		cmd->response[3] = (cmdrsp0 << 8);
 	} else
-		cmd->response[0] = in_be32(&regs->cmdrsp0);
+		cmd->response[0] = ioread32(&regs->cmdrsp0);
 
 	/* Wait until all of the blocks are transferred */
 	if (data) {
 		do {
-			irqstat = in_be32(&regs->irqstat);
+			irqstat = ioread32(&regs->irqstat);
 
 			if (irqstat & DATA_ERR)
 				return COMM_ERR;
@@ -226,10 +230,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 			if (irqstat & IRQSTAT_DTOE)
 				return TIMEOUT;
 		} while (!(irqstat & IRQSTAT_TC) &&
-				(in_be32(&regs->prsstat) & PRSSTAT_DLA));
+				(ioread32(&regs->prsstat) & PRSSTAT_DLA));
 	}
 
-	out_be32(&regs->irqstat, -1);
+	iowrite32(&regs->irqstat, -1);
 
 	return 0;
 }
@@ -238,9 +242,13 @@ void set_sysctl(struct mmc *mmc, uint clock)
 {
 	int sdhc_clk = gd->sdhc_clk;
 	int div, pre_div;
-	volatile struct fsl_esdhc *regs = mmc->priv;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 	uint clk;
 
+	if (clock < mmc->f_min)
+		clock = mmc->f_min;
+
 	if (sdhc_clk / 16 > clock) {
 		for (pre_div = 2; pre_div < 256; pre_div *= 2)
 			if ((sdhc_clk / pre_div) <= (clock * 16))
@@ -257,67 +265,106 @@ void set_sysctl(struct mmc *mmc, uint clock)
 
 	clk = (pre_div << 8) | (div << 4);
 
-	clrsetbits_be32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
+	/* On imx the clock must be stopped before changing frequency */
+	if (cfg->clk_enable)
+		clrbits_reg32(&regs->sysctl, SYSCTL_CKEN);
+
+	clrsetbits_reg32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
 
 	udelay(10000);
 
-	setbits_be32(&regs->sysctl, SYSCTL_PEREN);
+	clk = SYSCTL_PEREN;
+	/* On imx systems the clock must be explicitely enabled */
+	if (cfg->clk_enable)
+		clk |= SYSCTL_CKEN;
+
+	setbits_reg32(&regs->sysctl, clk);
 }
 
 static void esdhc_set_ios(struct mmc *mmc)
 {
-	struct fsl_esdhc *regs = mmc->priv;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 
 	/* Set the clock speed */
 	set_sysctl(mmc, mmc->clock);
 
 	/* Set the bus width */
-	clrbits_be32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
+	clrbits_reg32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
 
 	if (mmc->bus_width == 4)
-		setbits_be32(&regs->proctl, PROCTL_DTW_4);
+		setbits_reg32(&regs->proctl, PROCTL_DTW_4);
 	else if (mmc->bus_width == 8)
-		setbits_be32(&regs->proctl, PROCTL_DTW_8);
+		setbits_reg32(&regs->proctl, PROCTL_DTW_8);
+
 }
 
 static int esdhc_init(struct mmc *mmc)
 {
-	struct fsl_esdhc *regs = mmc->priv;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 	int timeout = 1000;
+	int ret = 0;
+	u8 card_absent;
 
 	/* Enable cache snooping */
-	out_be32(&regs->scr, 0x00000040);
+	if (cfg && !cfg->no_snoop)
+		iowrite32(&regs->scr, 0x00000040);
 
-	out_be32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
+	/* Reset the entire host controller */
+	iowrite32(&regs->sysctl, SYSCTL_RSTA);
+
+	/* Wait until the controller is available */
+	while ((ioread32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
+		udelay(1000);
+
+	iowrite32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
 
 	/* Set the initial clock speed */
 	set_sysctl(mmc, 400000);
 
 	/* Disable the BRR and BWR bits in IRQSTAT */
-	clrbits_be32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
+	clrbits_reg32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
 
 	/* Put the PROCTL reg back to the default */
-	out_be32(&regs->proctl, PROCTL_INIT);
+	iowrite32(&regs->proctl, PROCTL_INIT);
 
-	while (!(in_be32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
-		udelay(1000);
+	/* Set timout to the maximum value */
+	clrsetbits_reg32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 
-	if (timeout <= 0)
-		return NO_CARD_ERR;
+	/* Check if there is a callback for detecting the card */
+	if (board_mmc_getcd(&card_absent, mmc)) {
+		timeout = 1000;
+		while (!(ioread32(&regs->prsstat) & PRSSTAT_CINS) &&
+				--timeout)
+			udelay(1000);
 
-	return 0;
+		if (timeout <= 0)
+			ret = NO_CARD_ERR;
+	} else {
+		if (card_absent)
+			ret = NO_CARD_ERR;
+	}
+
+	return ret;
 }
 
-static int esdhc_initialize(bd_t *bis)
+int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 {
-	struct fsl_esdhc *regs = (struct fsl_esdhc *)CONFIG_SYS_FSL_ESDHC_ADDR;
+	int sdhc_clk = gd->sdhc_clk;
+	struct fsl_esdhc *regs;
 	struct mmc *mmc;
 	u32 caps;
 
+	if (!cfg)
+		return -1;
+
 	mmc = malloc(sizeof(struct mmc));
 
 	sprintf(mmc->name, "FSL_ESDHC");
-	mmc->priv = regs;
+	regs = (struct fsl_esdhc *)cfg->esdhc_base;
+
+	mmc->priv = cfg;
 	mmc->send_cmd = esdhc_send_cmd;
 	mmc->set_ios = esdhc_set_ios;
 	mmc->init = esdhc_init;
@@ -337,7 +384,7 @@ static int esdhc_initialize(bd_t *bis)
 		mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 
 	mmc->f_min = 400000;
-	mmc->f_max = MIN(gd->sdhc_clk, 50000000);
+	mmc->f_max = MIN(sdhc_clk, 50000000);
 
 	mmc_register(mmc);
 
@@ -346,9 +393,16 @@ static int esdhc_initialize(bd_t *bis)
 
 int fsl_esdhc_mmc_init(bd_t *bis)
 {
-	return esdhc_initialize(bis);
+	struct fsl_esdhc_cfg *cfg;
+
+	cfg = malloc(sizeof(struct fsl_esdhc_cfg));
+	memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
+	cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+	printf("HERE NOT!!!\n");
+	return fsl_esdhc_initialize(bis, cfg);
 }
 
+#ifdef CONFIG_OF_LIBFDT
 void fdt_fixup_esdhc(void *blob, bd_t *bd)
 {
 	const char *compat = "fsl,esdhc";
@@ -365,3 +419,4 @@ out:
 	do_fixup_by_compat(blob, compat, "status", status,
 			   strlen(status) + 1, 1);
 }
+#endif
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index 8115a24..02cfe45 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -44,6 +44,9 @@ typedef	struct	global_data {
 #ifdef CONFIG_VFD
 	unsigned char	vfd_type;	/* display type */
 #endif
+#ifdef CONFIG_FSL_ESDHC
+	unsigned long	sdhc_clk;
+#endif
 #if 0
 	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
 	unsigned long	bus_clk;
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 89b8304..5fe9946 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -32,7 +32,9 @@
 #define SYSCTL			0x0002e02c
 #define SYSCTL_INITA		0x08000000
 #define SYSCTL_TIMEOUT_MASK	0x000f0000
-#define SYSCTL_CLOCK_MASK	0x00000fff
+#define SYSCTL_CLOCK_MASK	0x0000fff0
+#define SYSCTL_RSTA		0x01000000
+#define SYSCTL_CKEN		0x00000008
 #define SYSCTL_PEREN		0x00000004
 #define SYSCTL_HCKEN		0x00000002
 #define SYSCTL_IPGEN		0x00000001
@@ -142,8 +144,15 @@
 #define ESDHC_HOSTCAPBLT_DMAS	0x00400000
 #define ESDHC_HOSTCAPBLT_HSS	0x00200000
 
+struct fsl_esdhc_cfg {
+	u32	esdhc_base;
+	u32	no_snoop;
+	u32	clk_enable;
+};
+
 #ifdef CONFIG_FSL_ESDHC
 int fsl_esdhc_mmc_init(bd_t *bis);
+int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
 void fdt_fixup_esdhc(void *blob, bd_t *bd);
 #else
 static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
diff --git a/lib_arm/board.c b/lib_arm/board.c
index e148739..f5660a9 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -243,6 +243,9 @@ init_fnc_t *init_sequence[] = {
 	interrupt_init,		/* set up exceptions */
 #endif
 	timer_init,		/* initialize timer */
+#ifdef CONFIG_FSL_ESDHC
+	get_clocks,
+#endif
 	env_init,		/* initialize environment */
 	init_baudrate,		/* initialze baudrate settings */
 	serial_init,		/* serial communications setup */
-- 
1.6.3.3



More information about the U-Boot mailing list