[U-Boot] [PATCH 1/3] add redundant environment for env_sf.c
Mike Frysinger
vapier at gentoo.org
Thu Jul 1 05:50:41 CEST 2010
From: Wolfgang Wegner <w.wegner at astro-kom.de>
This patch adds redundant environment for environment in SPI flash.
I took env_flash.c as an example and slightly modified it. Apart
from adapting things to SF, I also slightly changed the decision
logic to use area 2 as a default in case the flags are wrong because
not having a default path worried me.
I did not add a section for CONFIG_ENV_IS_IN_SPI_FLASH in environment.h
because I did not understand if this is desired and/or needed.
So to use the feature, one has to set CONFIG_ENV_OFFSET_REDUND _and_
CONFIG_SYS_REDUNDAND_ENVIRONMENT.
I checked it by powering off my board several times during flash
erase or write, because I do not know if there are other stress
test scenarios.
Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
Acked-by: Mike Frysinger <vapier at gentoo.org>
---
common/env_sf.c | 232 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 232 insertions(+), 0 deletions(-)
diff --git a/common/env_sf.c b/common/env_sf.c
index 6575b6d..4391d61 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -43,6 +43,14 @@
# define CONFIG_ENV_SPI_MODE SPI_MODE_3
#endif
+#ifdef CONFIG_ENV_OFFSET_REDUND
+static ulong env_offset = CONFIG_ENV_OFFSET;
+static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND;
+
+#define ACTIVE_FLAG 1
+#define OBSOLETE_FLAG 0
+#endif /* CONFIG_ENV_ADDR_REDUND */
+
DECLARE_GLOBAL_DATA_PTR;
/* references to names in env_common.c */
@@ -58,6 +66,229 @@ uchar env_get_char_spec(int index)
return *((uchar *)(gd->env_addr + index));
}
+#if defined(CONFIG_ENV_OFFSET_REDUND)
+void swap_env(void)
+{
+ ulong tmp_offset = env_offset;
+
+ env_offset = env_new_offset;
+ env_new_offset = tmp_offset;
+}
+
+int saveenv(void)
+{
+ u32 saved_size, saved_offset;
+ char *saved_buffer = NULL;
+ u32 sector = 1;
+ int ret;
+ char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
+
+ if (!env_flash) {
+ puts("Environment SPI flash not initialized\n");
+ return 1;
+ }
+
+ /* Is the sector larger than the env (i.e. embedded) */
+ if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
+ saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
+ saved_offset = env_new_offset + CONFIG_ENV_SIZE;
+ saved_buffer = malloc(saved_size);
+ if (!saved_buffer) {
+ ret = 1;
+ goto done;
+ }
+ ret = spi_flash_read(env_flash, saved_offset,
+ saved_size, saved_buffer);
+ if (ret)
+ goto done;
+ }
+
+ if (CONFIG_ENV_SIZE > CONFIG_ENV_SECT_SIZE) {
+ sector = CONFIG_ENV_SIZE / CONFIG_ENV_SECT_SIZE;
+ if (CONFIG_ENV_SIZE % CONFIG_ENV_SECT_SIZE)
+ sector++;
+ }
+
+ puts("Erasing SPI flash...");
+ ret = spi_flash_erase(env_flash, env_new_offset,
+ sector * CONFIG_ENV_SECT_SIZE);
+ if (ret)
+ goto done;
+
+ puts("Writing to SPI flash...");
+ ret = spi_flash_write(env_flash,
+ env_new_offset + offsetof(env_t, data),
+ sizeof(env_ptr->data), env_ptr->data);
+ if (ret)
+ goto done;
+
+ ret = spi_flash_write(env_flash,
+ env_new_offset + offsetof(env_t, crc),
+ sizeof(env_ptr->crc), &env_ptr->crc);
+ if (ret)
+ goto done;
+
+ ret = spi_flash_write(env_flash,
+ env_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &flag);
+ if (ret)
+ goto done;
+
+ ret = spi_flash_write(env_flash,
+ env_new_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &new_flag);
+ if (ret)
+ goto done;
+
+ if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
+ ret = spi_flash_write(env_flash, saved_offset,
+ saved_size, saved_buffer);
+ if (ret)
+ goto done;
+ }
+
+ swap_env();
+
+ ret = 0;
+ puts("done\n");
+
+ done:
+ if (saved_buffer)
+ free(saved_buffer);
+ return ret;
+}
+
+void env_relocate_spec(void)
+{
+ int ret;
+ int crc1_ok = 0, crc2_ok = 0;
+ env_t *tmp_env1 = NULL;
+ env_t *tmp_env2 = NULL;
+ uchar flag1, flag2;
+ /* current_env is set only in case both areas are valid! */
+ int current_env = 0;
+
+ tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE);
+ if (!tmp_env1) {
+ puts("*** Warning: could not init environment,"
+ " using defaults\n\n");
+ goto out;
+ }
+
+ tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE);
+ if (!tmp_env2) {
+ puts("*** Warning: could not init environment,"
+ " using defaults\n\n");
+ goto out;
+ }
+
+ env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (!env_flash)
+ goto err_probe;
+
+ ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET,
+ CONFIG_ENV_SIZE, tmp_env1);
+ if (ret)
+ goto err_read;
+
+ if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc)
+ crc1_ok = 1;
+ flag1 = tmp_env1->flags;
+
+ ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND,
+ CONFIG_ENV_SIZE, tmp_env2);
+ if (!ret) {
+ if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc)
+ crc2_ok = 1;
+ flag2 = tmp_env2->flags;
+ }
+
+ if (!crc1_ok && !crc2_ok)
+ goto err_crc;
+ else if (crc1_ok && !crc2_ok) {
+ gd->env_valid = 1;
+ memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+ } else if (!crc1_ok && crc2_ok) {
+ gd->env_valid = 1;
+ memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+ swap_env();
+ } else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) {
+ gd->env_valid = 1;
+ memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+ } else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) {
+ gd->env_valid = 1;
+ memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+ swap_env();
+ } else if (flag1 == flag2) {
+ gd->env_valid = 2;
+ memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+ current_env = 1;
+ } else if (flag1 == 0xFF) {
+ gd->env_valid = 2;
+ memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+ current_env = 1;
+ } else {
+ /*
+ * this differs from code in env_flash.c, but I think a sane
+ * default path is desirable.
+ */
+ gd->env_valid = 2;
+ memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+ swap_env();
+ current_env = 2;
+ }
+ if (current_env == 1) {
+ if (flag2 != OBSOLETE_FLAG) {
+ flag2 = OBSOLETE_FLAG;
+ spi_flash_write(env_flash,
+ env_new_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &flag2);
+ }
+ if (flag1 != ACTIVE_FLAG) {
+ flag1 = ACTIVE_FLAG;
+ spi_flash_write(env_flash,
+ env_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &flag1);
+ }
+ } else if (current_env == 2) {
+ if (flag1 != OBSOLETE_FLAG) {
+ flag1 = OBSOLETE_FLAG;
+ spi_flash_write(env_flash,
+ env_new_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &flag1);
+ }
+ if (flag2 != ACTIVE_FLAG) {
+ flag2 = ACTIVE_FLAG;
+ spi_flash_write(env_flash,
+ env_offset + offsetof(env_t, flags),
+ sizeof(env_ptr->flags), &flag2);
+ }
+ }
+ if (gd->env_valid == 2) {
+ puts("*** Warning - some problems detected "
+ "reading environment; recovered successfully\n\n");
+ }
+ if (tmp_env1)
+ free(tmp_env1);
+ if (tmp_env2)
+ free(tmp_env2);
+ return;
+
+err_read:
+ spi_flash_free(env_flash);
+ env_flash = NULL;
+err_probe:
+err_crc:
+ puts("*** Warning - bad CRC, using default environment\n\n");
+out:
+ if (tmp_env1)
+ free(tmp_env1);
+ if (tmp_env2)
+ free(tmp_env2);
+ set_default_env();
+}
+#else
int saveenv(void)
{
u32 saved_size, saved_offset;
@@ -144,6 +375,7 @@ err_crc:
set_default_env();
}
+#endif
int env_init(void)
{
--
1.7.1
More information about the U-Boot
mailing list