July 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Jul 1 00:35:55 CEST 2010
Ending: Sat Jul 31 20:29:36 CEST 2010
Messages: 1266

• [U-Boot] AT91SAM9xxx SDCard/MMC support?   Reinhard Meyer (-VC)
• [U-Boot] AT91SAM9xxx SDCard/MMC support?   Reinhard Meyer (-VC)
• [U-Boot] AT91SAM9xxx SDCard/MMC support?   Reinhard Meyer (-VC)
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Reinhard Meyer (-VC)
• [U-Boot] cmd_date.c error or itention?   Reinhard Meyer (-VC)
• [U-Boot] [PATCH 0/3] AT91: add header files, update cpu.c, add RTC support   Reinhard Meyer (-VC)
• [U-Boot] [PATCH 1/3] AT91: add two new header files for RTT and GPBR   Reinhard Meyer (-VC)
• [U-Boot] [PATCH 2/3] AT91: update cpu.c to use GPBR definitions from at91_gpbr.h   Reinhard Meyer (-VC)
• [U-Boot] [PATCH 3/3] AT91: add RTT and GPBR based RTC support   Reinhard Meyer (-VC)
• [U-Boot] [PATCH] AT91SAM9XE add embedded flash support   Reinhard Meyer (-VC)
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Reinhard Meyer (-VC)
• [U-Boot] [PATCH] AT91SAM9XE add embedded flash support   Reinhard Meyer (-VC)
• [U-Boot] [PATCH] common: add a grepenv command   Reinhard Meyer (-VC)
• [U-Boot] Question about patches   Reinhard Meyer (-VC)
• [U-Boot] Non standard CFI detection tweaks   Reinhard Meyer (-VC)
• [U-Boot] Non standard CFI detection tweaks   Reinhard Meyer (-VC)
• [U-Boot] Non standard CFI detection tweaks   Reinhard Meyer (-VC)
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer (-VC)
• [U-Boot] [PATCH] AT91: remove superfluous test in spi driver   Reinhard Meyer (-VC)
• [U-Boot] award   BHAKI6 ALLISON
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Albert ARIBAUD
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Albert ARIBAUD
• [U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]   Albert ARIBAUD
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Albert ARIBAUD
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Albert ARIBAUD
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Albert ARIBAUD
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] egiga: remove references to kirkwood SoC   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] egiga: Remove functional dependency on kirkwood   Albert ARIBAUD
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Albert ARIBAUD
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Albert ARIBAUD
• [U-Boot] [PATCH V2 2/3] orion5x: add ide support for Marvell SATA   Albert ARIBAUD
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Albert ARIBAUD
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Albert ARIBAUD
• [U-Boot] [PATCH V2 4/6] mv_egiga: only randomize MAC on kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Albert ARIBAUD
• [U-Boot] mv_egiga: effect on making struct members volatile(was: [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile)   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Albert ARIBAUD
• [U-Boot] [PATCH] kirkwood_egiga: bugfix: add DMA sequence points   Albert ARIBAUD
• [U-Boot] [PATCH] kirkwood_egiga: bugfix: add DMA sequence points   Albert ARIBAUD
• [U-Boot] [PATCH V3 5/5] edminiv2: add ethernet support   Albert ARIBAUD
• [U-Boot] [PATCH V3 3/4] orion5x: add support for cmd_ide.c   Albert ARIBAUD
• [U-Boot] [PATCH V3 4/4] edminiv2: add cmd_ide support   Albert ARIBAUD
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH V4 0/4] Marvell GbE multiple SoC support   Albert ARIBAUD
• [U-Boot] Error detecting CFI-compliant NOR flash on Orion5x (DNS323)   Albert ARIBAUD
• [U-Boot] (imp) uboot image size   Albert ARIBAUD
• [U-Boot] [PATCH V5 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert ARIBAUD
• [U-Boot] (imp) uboot image size   Albert ARIBAUD
• [U-Boot] (imp) uboot image size   Albert ARIBAUD
• [U-Boot] (imp) uboot image size   Albert ARIBAUD
• [U-Boot] (imp) uboot image size   Albert ARIBAUD
• [U-Boot] [PATCH V5 2/4] ide: add mvsata_ide driver   Albert ARIBAUD
• [U-Boot] Non standard CFI detection tweaks   Albert ARIBAUD
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] Webmail Update Account   Mail Administrator
• [U-Boot] Webmail Update Account   Mail Administrator
• [U-Boot] [PATCH][updated][85xx/p1_p2_rdb] PCIe E1000 card support added.   Poonam Aggrwal
• [U-Boot] Greetings   Mrs juliana Amber
• [U-Boot] Contact Owens Gibson via email: msoftclaims10 at w.cn Now   Crosswhite Anita
• [U-Boot] [PATCH 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH 2/4] orion5x: edminiv2: add CMD_IDE support   Albert Aribaud
• [U-Boot] [PATCH 3/4] orion5x: fix typo in comment   Albert Aribaud
• [U-Boot] [PATCH 4/4] edminiv2: inttroduce CONFIG_SKIP_LOWLEVEL_INIT   Albert Aribaud
• [U-Boot] [PATCH 0/4] make egiga common to kirkwood and orion5x   Albert Aribaud
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Albert Aribaud
• [U-Boot] [PATCH 2/4] egiga: Remove functional dependency on kirkwood   Albert Aribaud
• [U-Boot] [PATCH 3/4] egiga: remove references to kirkwood SoC   Albert Aribaud
• [U-Boot] [PATCH 4/4] egiga: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH] kirkwood_egiga: updates: fix DRAM mapping and typo   Albert Aribaud
• [U-Boot] [PATCH V2 1/3] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V2 2/3] orion5x: add ide support for Marvell SATA   Albert Aribaud
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Albert Aribaud
• [U-Boot] [PATCH V3 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V3 2/4] drivers/block: add mv_sata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V3 3/4] orion5x: add support for cmd_ide.c   Albert Aribaud
• [U-Boot] [PATCH V3 4/4] edminiv2: add cmd_ide support   Albert Aribaud
• [U-Boot] [PATCH V2 0/6] Marvell egiga multiple SoC support   Albert Aribaud
• [U-Boot] [PATCH V2 1/6] net: rename: kirkwood_egiga as mv_egiga   Albert Aribaud
• [U-Boot] [PATCH V2 2/6] mv_egiga: support SoCs other than kirkwood   Albert Aribaud
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Albert Aribaud
• [U-Boot] [PATCH V2 4/6] mv_egiga: only randomize MAC on kirkwood   Albert Aribaud
• [U-Boot] [PATCH V2 5/6] mv_egiga: add support for orion5x egiga controller   Albert Aribaud
• [U-Boot] [PATCH V2 6/6] edminiv2: add ethernet support   Albert Aribaud
• [U-Boot] [PATCH] kirkwood_egiga: bugfix: add DMA sequence points   Albert Aribaud
• [U-Boot] [PATCH] kirkwood_egiga: bugfix: add DMA sequence points   Albert Aribaud
• [U-Boot] [PATCH V2] kirkwood_egiga: bugfix: add DMA sequence points   Albert Aribaud
• [U-Boot] [PATCH V3 0/5] Marvell egiga multiple SoC support   Albert Aribaud
• [U-Boot] [PATCH V3 1/5] net: rename: kirkwood_egiga as mv_egiga   Albert Aribaud
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Albert Aribaud
• [U-Boot] [PATCH V3 3/5] mv_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION   Albert Aribaud
• [U-Boot] [PATCH V3 4/5] mv_egiga: add support for orion5x egiga controller   Albert Aribaud
• [U-Boot] [PATCH V3 5/5] edminiv2: add ethernet support   Albert Aribaud
• [U-Boot] [PATCH] kirkwood_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION   Albert Aribaud
• [U-Boot] [PATCH V4 0/4] Marvell GbE multiple SoC support   Albert Aribaud
• [U-Boot] [PATCH V4 1/4] net: rename: kirkwood_egiga as mvgbe   Albert Aribaud
• [U-Boot] [PATCH V4 2/4] mvgbe: support SoCs other than kirkwood   Albert Aribaud
• [U-Boot] [PATCH V4 3/4] mvgbe: add support for orion5x GbE controller   Albert Aribaud
• [U-Boot] [PATCH V4 4/4] edminiv2: add ethernet support   Albert Aribaud
• [U-Boot] [PATCH] orion5x: allow overriding default mappings windows   Albert Aribaud
• [U-Boot] [PATCH V4 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V4 2/4] ide: add mvsata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V4 3/4] cmd_ide: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH V4 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert Aribaud
• [U-Boot] [PATCH V5 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V5 2/4] ide: add mvsata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V5 3/4] cmd_ide: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert Aribaud
• [U-Boot] [PATCH V6 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V6 2/4] ide: add mvsata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V6 3/4] cmd_ide: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH V6 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert Aribaud
• [U-Boot] IRQ in realmode and sleep()   Reinhard Arlt
• [U-Boot] MX31PDK not booting with U-boot v2010.06   Stefano Babic
• [U-Boot] davinci: lowlevel_init for davinci boards   Stefano Babic
• [U-Boot] davinci: lowlevel_init for davinci boards   Stefano Babic
• [U-Boot] USB CDC branch   Stefano Babic
• [U-Boot] mkconfig "arch" link generation   Stefano Babic
• [U-Boot] mkconfig "arch" link generation   Stefano Babic
• [U-Boot] guys, can you see some init code for davinci's chipselect bit width driving DM9000A?   Stefano Babic
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Stefano Babic
• [U-Boot] [PATCH] net, fec: Shorten device name as done for other drivers   Stefano Babic
• [U-Boot] guys, can you see some init code for davinci's chipselect bit width driving DM9000A?   Stefano Babic
• [U-Boot] Question about patches   Stefano Babic
• [U-Boot] USB CDC Branch: adding gadget for MUSB   Stefano Babic
• [U-Boot] How to handle binary data file in u-boot   Stefano Babic
• [U-Boot] FW: Issue in TFTP using LSI Ethernet Phyceiver   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] DM6467 Ethernet Interface Issue - Req support   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] Using YAFFS in u-boot   Peter Barada
• [U-Boot] [PATCH 2/2] fdt: Add fdt_node_offset_by_compat_reg helper   Jerry Van Baren
• [U-Boot] [PATCH 1/2] fdt: Add fdt_translate_address to convert reg node to cpu phys addr   Jerry Van Baren
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Jerry Van Baren
• [U-Boot] [PATCH v3] fdt: Add function to alloc phandle values   Jerry Van Baren
• [U-Boot] [PATCH] common: add a grepenv command   Jerry Van Baren
• [U-Boot] [PATCH 1/5] Add basic errno support.   Jerry Van Baren
• [U-Boot] Uboot warm reset   Brent Bartson
• [U-Boot] new to U-boot, need help on U-boot porting on SMDK6410   Sudipta Basu
• [U-Boot] I need the link : U-Boot for OMAP3530 Mistral EVM   Sudipta Basu
• [U-Boot] Need Help : OMAP3530 Mistral EVM   Sudipta Basu
• [U-Boot] Usage of bi_env ?   Dirk Behme
• [U-Boot] [RFC PATCH] Remove unused variable bi_env   Dirk Behme
• [U-Boot] Usage of bi_env ?   Dirk Behme
• [U-Boot] USB CDC branch   Remy Bohmer
• [U-Boot] USB CDC branch   Remy Bohmer
• [U-Boot] USB CDC branch   Remy Bohmer
• [U-Boot] (Dear God's elect,)   Mrs.Margaret Brown
• [U-Boot] [PATCH v2 1/2] cpuat91: convert to new at91 soc architecture   Eric Bénard
• [U-Boot] [PATCH v2 2/2] cpuat91: update defaut environement   Eric Bénard
• [U-Boot] [PATCH v3 1/2] cpuat91: convert to new at91 soc architecture   Eric Bénard
• [U-Boot] [PATCH v3 2/2] cpuat91: update defaut environement   Eric Bénard
• [U-Boot] did anyone use flash_utils on dm355 platform?i cannot write flash!   Henrique Camargo
• [U-Boot] Adding New Boards   Henrique Camargo
• [U-Boot] [PATCH 03/35] Blackfin: expand EVT1 usage documentation a bit more   Aldo Cedillo
• [U-Boot] [PATCH v4] [U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Aldo Cedillo
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Aldo Cedillo
• [U-Boot] [PATCH 1/2] [U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Aldo Cedillo
• [U-Boot] [PATCH 2/2] [U-BOOT] Unify serial_device for zoom2 and zoom3.   Aldo Cedillo
• [U-Boot] new to U-boot, need help on U-boot porting on SMDK6410   Aldo Cedillo
• [U-Boot] I need the link : U-Boot for OMAP3530 Mistral EVM   Naveen Krishna Ch
• [U-Boot] [PATCH 3/3 v8] mmc: add generic mmc spi driver   Thomas Chou
• [U-Boot] [PATCH 2/2 v2] gpio_led: add gpio_request to __led_init   Thomas Chou
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Thomas Chou
• [U-Boot] [PATCH 1/2] i2c: soft_i2c: add simple GPIO implementation   Thomas Chou
• [U-Boot] [PATCH 1/2] mtd: nand_plat: add simple GPIO framework DEV_READY option   Thomas Chou
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Thomas Chou
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Thomas Chou
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Thomas Chou
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Thomas Chou
• [U-Boot] [PATCH 1/2 v2] i2c: soft_i2c: add simple GPIO implementation   Thomas Chou
• [U-Boot] [PATCH] nios2: fix bootm error on fdt args   Thomas Chou
• [U-Boot] [PATCH] fix bug in get_ram_size()   Po-Yu Chuang
• [U-Boot] Booting Linux on a Custom 460EX Board   Chris Colicino
• [U-Boot] Outrageous Only $4.99 Real Traffic For Your Business!   ContactSolo
• [U-Boot] Error detecting CFI-compliant NOR flash on Orion5x (DNS323)   Rogan Dawes
• [U-Boot] [PATCH V4 2/4] ide: add mvsata_ide driver   Rogan Dawes
• [U-Boot] Error detecting CFI-compliant NOR flash on Orion5x (DNS323)   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] One of your Facebook friends invites you to join the App of the Day   Facebook App of the Day
• [U-Boot] [PATCH 4/6 v3] exports.c: fix warning: 'dummy' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Wolfgang Denk
• [U-Boot] [PATCH 4/6 v3] exports.c: fix warning: 'dummy' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH 4/6 v4] exports.c: fix warning: 'dummy' defined but not used   Wolfgang Denk
• [U-Boot] boards.cfg: add missing entries for am3517_evm and s5p_goni   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] [PATCH v2] boards.cfg: fix ML2, am3517_evm and s5p_goni boards   Wolfgang Denk
• [U-Boot] [PATCH v2] boards.cfg: fix ML2, am3517_evm and s5p_goni boards   Wolfgang Denk
• [U-Boot] [PATCH 2/6] shannon/INFERNO: fix special handling of environment configuration   Wolfgang Denk
• [U-Boot] [PATCH 3/6] cmd_ide.c: fix unused variable warning for SC3 board   Wolfgang Denk
• [U-Boot] [PATCH 4/6 v4] exports.c: fix warning: 'dummy' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH 5/6] Make *printf() return "int" instead of "void"   Wolfgang Denk
• [U-Boot] [PATCH 6/6] Redundant environment: move flag definitions to header file   Wolfgang Denk
• [U-Boot] [PATCH] Make sure that argv[] argument pointers are not modified.   Wolfgang Denk
• [U-Boot] [PATCH] Drop support for GTH board   Wolfgang Denk
• [U-Boot] [PATCH v2] Drop support for GTH board   Wolfgang Denk
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Wolfgang Denk
• [U-Boot] 答复: [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Wolfgang Denk
• [U-Boot] cmd_date.c error or itention?   Wolfgang Denk
• [U-Boot] cmd_date.c error or itention?   Wolfgang Denk
• [U-Boot] [PATCH v3] Drop support for GTH board   Wolfgang Denk
• [U-Boot] [PATCH v2] Drop support for GTH board   Wolfgang Denk
• [U-Boot] [PATCH] Add support for NetusG20   Wolfgang Denk
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Wolfgang Denk
• [U-Boot] [PATCH v1]ppc4xx/Canyonlands added USB board callbacks   Wolfgang Denk
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Wolfgang Denk
• [U-Boot] (imp) uboot image size   Wolfgang Denk
• [U-Boot] mkconfig "arch" link generation   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] [PULL] u-boot-pxa next-mmc   Wolfgang Denk
• [U-Boot] [PULL] u-boot-pxa next   Wolfgang Denk
• [U-Boot] [PULL] u-boot-pxa next   Wolfgang Denk
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add command to report errata workarounds   Wolfgang Denk
• [U-Boot] [PATCH 2/2] powerpc/85xx: Report workaround of errata SATA-A001   Wolfgang Denk
• [U-Boot] [PATCH v3] Move ICS CLK chip frequenty calculation code into a common board library   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Add recognition of e5500 core   Wolfgang Denk
• [U-Boot] [PATCH] [v3] powerpc: add support for the Freescale P1022DS reference board   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Pull request - net *updated*   Wolfgang Denk
• [U-Boot] [GIT PULL] u-boot-mpc83xx: support for mpc8308rdb and ve8313 boards   Wolfgang Denk
• [U-Boot] [Nios] Pull Request   Wolfgang Denk
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Wolfgang Denk
• [U-Boot] (imp) uboot image size   Wolfgang Denk
• [U-Boot] (imp) uboot image size   Wolfgang Denk
• [U-Boot] [PULL] u-boot-pxa next   Wolfgang Denk
• [U-Boot] (imp) uboot image size   Wolfgang Denk
• [U-Boot] [PATCH] p1022ds: fix indentation of case statement   Wolfgang Denk
• [U-Boot] (imp) uboot image size   Wolfgang Denk
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add command to report errata workarounds   Wolfgang Denk
• [U-Boot] [PATCH 2/2] powerpc/85xx: Report workaround of errata SATA-A001   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx: Add command to report errata workarounds   Wolfgang Denk
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Wolfgang Denk
• [U-Boot] mkconfig "arch" link generation   Wolfgang Denk
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Wolfgang Denk
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Wolfgang Denk
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Wolfgang Denk
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Wolfgang Denk
• [U-Boot] [PULL] U-Boot-pxa   Wolfgang Denk
• [U-Boot] [PATCH 1/2] 8xx, kup4: minor configuration changes   Wolfgang Denk
• [U-Boot] [PATCH 2/2] 8xx, kup4: add FDT support   Wolfgang Denk
• [U-Boot] Usage of bi_env ?   Wolfgang Denk
• [U-Boot] [PATCH 1/3] at91: Defined main clock frequency on esd at91 boards   Wolfgang Denk
• [U-Boot] [PATCH 2/3] at91: Update meesc board to new SoC access   Wolfgang Denk
• [U-Boot] [PATCH 07/28] SPEAr : macb driver support added for spear310 and spear320   Wolfgang Denk
• [U-Boot] [PATCH 08/28] SPEAr : FSMC driver support added   Wolfgang Denk
• [U-Boot] [PATCH 13/28] SPEAr : Supporting various configurations for spear3xx and spear6xx boards   Wolfgang Denk
• [U-Boot] [PATCH 14/28] SPEAr : Basic spear1300 architecture support added   Wolfgang Denk
• [U-Boot] [PATCH 15/28] SPEAr : spear1300 SoC support added   Wolfgang Denk
• [U-Boot] [PATCH 21/28] Enable high speed support for usb device framework and usbtty   Wolfgang Denk
• [U-Boot] [PATCH 24/28] SPEAr : Network support configuration   Wolfgang Denk
• [U-Boot] [PATCH 25/28] SPEAr : Enabling GPT clock explicitly   Wolfgang Denk
• [U-Boot] [PATCH 27/28] SPEAr : Ethernet issue workaround is not needed when uboot is acting as flashing   Wolfgang Denk
• [U-Boot] [PATCH 28/28] SPEAr1310 : spear1310 support added   Wolfgang Denk
• [U-Boot] [PULL] U-Boot-pxa   Wolfgang Denk
• [U-Boot] [PATCH v4] [U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Wolfgang Denk
• [U-Boot] [PATCH] common: add a grepenv command   Wolfgang Denk
• [U-Boot] [PATCH] common: add a grepenv command   Wolfgang Denk
• [U-Boot] [PATCH 13/28] SPEAr : Supporting various configurations for spear3xx and spear6xx boards   Wolfgang Denk
• [U-Boot] u-boot problem for M501 Board after u-boot-2009   Wolfgang Denk
• [U-Boot] [PATCH] common: add a grepenv command   Wolfgang Denk
• [U-Boot] [PATCH] common: add a grepenv command   Wolfgang Denk
• [U-Boot] [PULL] Please pull u-boot-arm master:master   Wolfgang Denk
• [U-Boot] [PULL] Please pull u-boot-arm master:master   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx [updated]   Wolfgang Denk
• [U-Boot] Please Pull u-boot-ti master   Wolfgang Denk
• [U-Boot] [PATCH] cmd_usage(): simplify return code handling   Wolfgang Denk
• [U-Boot] [PATCH v3] Drop support for GTH board   Wolfgang Denk
• [U-Boot] Please pull u-boot-video/master   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Add basic errno support.   Wolfgang Denk
• [U-Boot] [PATCH 2/5] Add qsort - add support for sorting data arrays   Wolfgang Denk
• [U-Boot] [PATCH 3/5] Add hash table support as base for new environment code   Wolfgang Denk
• [U-Boot] [PATCH 4/5] Remove support for CONFIG_HAS_UID and "forceenv" command   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Add basic errno support.   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH] new env: fix off-by-one error in setenv command   Wolfgang Denk
• [U-Boot] [PATCH 0/5] New environment code   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Add basic errno support.   Wolfgang Denk
• [U-Boot] Too Much Email   Wolfgang Denk
• [U-Boot] S3C2440 "usb start" and then "usb stop" cause nand operate failure.   Wolfgang Denk
• [U-Boot] [PATCH 0/5] FAT32: "Superfloppy" format and other fixes   Wolfgang Denk
• [U-Boot] [PATCH 1/5] usb_storage.c: initialize device type   Wolfgang Denk
• [U-Boot] [PATCH 2/5] FAT32: fix support for superfloppy-format (PBR)   Wolfgang Denk
• [U-Boot] [PATCH 3/5] FAT32: fix broken root directory handling.   Wolfgang Denk
• [U-Boot] [PATCH 4/5] usb_storage.c: change progress output in debug() message   Wolfgang Denk
• [U-Boot] [PATCH 5/5] fs/fat: Big code cleanup.   Wolfgang Denk
• [U-Boot] question about add new board to MAKEALL   Wolfgang Denk
• [U-Boot] question about example/standalone/mips.lds   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values   Wolfgang Denk
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Wolfgang Denk
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   Wolfgang Denk
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   Wolfgang Denk
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Wolfgang Denk
• [U-Boot] [PATCH v2] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Wolfgang Denk
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale   Wolfgang Denk
• [U-Boot] question about example/standalone/mips.lds   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] Question about patches   Wolfgang Denk
• [U-Boot] question about add new board to MAKEALL   Wolfgang Denk
• [U-Boot] Question about patches   Wolfgang Denk
• [U-Boot] Question about patches   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_ide: Convert to [read,write][b,w]   Wolfgang Denk
• [U-Boot] [PATCH V5 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Wolfgang Denk
• [U-Boot] question about add new board to MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] question about add new board to MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Wolfgang Denk
• [U-Boot] uboot redundancy.   Wolfgang Denk
• [U-Boot] uboot redundancy.   Wolfgang Denk
• [U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.   Wolfgang Denk
• [U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.   Wolfgang Denk
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Wolfgang Denk
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: cleanup default environment for AMCC boards   Wolfgang Denk
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-i2c   Wolfgang Denk
• [U-Boot] [PATCH] cmd_usage(): simplify return code handling   Wolfgang Denk
• [U-Boot] [PATCH 1/5] usb_storage.c: initialize device type   Wolfgang Denk
• [U-Boot] [PATCH 2/5] FAT32: fix support for superfloppy-format (PBR)   Wolfgang Denk
• [U-Boot] [PATCH 3/5] FAT32: fix broken root directory handling.   Wolfgang Denk
• [U-Boot] [PATCH 4/5] usb_storage.c: change progress output in debug() message   Wolfgang Denk
• [U-Boot] [PATCH 5/5] fs/fat: Big code cleanup.   Wolfgang Denk
• [U-Boot] [PATCH v4] Support for devices with FAT32 PBR   Wolfgang Denk
• [U-Boot] [PATCH] Rename getenv_r() into getenv_f()   Wolfgang Denk
• [U-Boot] [PATCH] getenv_f(): fix handling of too short buffers   Wolfgang Denk
• [U-Boot] Problem when compiling Uboot 1.3.4 use arm-linux-gcc 3.3.2   Wolfgang Denk
• [U-Boot] Katmai flash configuration   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Wolfgang Denk
• [U-Boot] [PATCH v2] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is undefined   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Wolfgang Denk
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Wolfgang Denk
• [U-Boot] funny/faulty message   Wolfgang Denk
• [U-Boot] Uboot warm reset   Wolfgang Denk
• [U-Boot] help on POST   Wolfgang Denk
• [U-Boot] help on POST   Wolfgang Denk
• [U-Boot] gcc optimizing option cause printf() and others crash.why?   Wolfgang Denk
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded test   Wolfgang Denk
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Andrew Dyer
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Andrew Dyer
• [U-Boot] question about example/standalone/mips.lds   Andrew Dyer
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Rasha Eqbal
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Rasha Eqbal
• [U-Boot] mkconfig "arch" link generation   Matteo Facchinetti
• [U-Boot] mkconfig "arch" link generation   Matteo Facchinetti
• [U-Boot] mkconfig "arch" link generation   Matteo Facchinetti
• [U-Boot] [PATCH 4/6 v3] exports.c: fix warning: 'dummy' defined but not used   Mike Frysinger
• [U-Boot] [PATCH 0/3] spi flash updates for v2010.09   Mike Frysinger
• [U-Boot] [PATCH 1/3] add redundant environment for env_sf.c   Mike Frysinger
• [U-Boot] [PATCH 2/3] spi_flash: support old STMicro parts with RES   Mike Frysinger
• [U-Boot] [PATCH 3/3] sf: move useful messages from debug to printf   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
• [U-Boot] [PATCH] net: dm9000x: re-add casts to I/O pointers to fix gcc warnings   Mike Frysinger
• [U-Boot] [PATCH] cmd_mmc: use common usage function   Mike Frysinger
• [U-Boot] [PATCH 3/3 v8] mmc: add generic mmc spi driver   Mike Frysinger
• [U-Boot] [PATCH 1/2] i2c: soft_i2c: add simple GPIO implementation   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code   Mike Frysinger
• [U-Boot] [PATCH 1/2] mtd: nand_plat: add simple GPIO framework DEV_READY option   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: convert plat-nand code to GPIO framework   Mike Frysinger
• [U-Boot] [PATCH 00/35] Blackfin updates for 2010.09   Mike Frysinger
• [U-Boot] [PATCH 01/35] Blackfin: clean up trace buffer handling when crashing   Mike Frysinger
• [U-Boot] [PATCH 02/35] Blackfin: implement bootcount support   Mike Frysinger
• [U-Boot] [PATCH 03/35] Blackfin: expand EVT1 usage documentation a bit more   Mike Frysinger
• [U-Boot] [PATCH 04/35] Blackfin: bf537-stamp: drop old spi_flash driver   Mike Frysinger
• [U-Boot] [PATCH 05/35] Blackfin: update anomaly lists to latest sheets   Mike Frysinger
• [U-Boot] [PATCH 06/35] Blackfin: set up simple NMI handlers for anomaly 05000219   Mike Frysinger
• [U-Boot] [PATCH 07/35] Blackfin: ibf-dsp561: enable AX88180 net driver   Mike Frysinger
• [U-Boot] [PATCH 08/35] Blackfin: import gpio/portmux layer from Linux   Mike Frysinger
• [U-Boot] [PATCH 09/35] Blackfin: unify custom gpio commands   Mike Frysinger
• [U-Boot] [PATCH 10/35] Blackfin: back out status_led.h stubs   Mike Frysinger
• [U-Boot] [PATCH 11/35] Blackfin: switch to common GPIO LED driver   Mike Frysinger
• [U-Boot] [PATCH 12/35] Blackfin: bf537-stamp: use common spi boot workaround code   Mike Frysinger
• [U-Boot] [PATCH 13/35] Blackfin: convert gpio flash logic to common gpio layer   Mike Frysinger
• [U-Boot] [PATCH 14/35] Blackfin: bfin_mac: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 15/35] Blackfin: bfin_nand: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 16/35] Blackfin: bfin_sdh: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 17/35] Blackfin: pata_bfin: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 18/35] Blackfin: serial: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 19/35] Blackfin: bfin_spi: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 20/35] Blackfin: bfin_spi: support gpios as chip selects   Mike Frysinger
• [U-Boot] [PATCH 21/35] Blackfin: bf533-stamp: convert eth/flash swap logic to gpio framework   Mike Frysinger
• [U-Boot] [PATCH 22/35] Blackfin: blackstamp: convert eth/flash swap logic to gpio framework   Mike Frysinger
• [U-Boot] [PATCH 23/35] Blackfin: bf533-stamp: scrub unused code   Mike Frysinger
• [U-Boot] [PATCH 24/35] Blackfin: bf518f-ezbrd: handle different PHYs dynamically   Mike Frysinger
• [U-Boot] [PATCH 25/35] Blackfin: bf518f-ezbrd: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 26/35] Blackfin: bf548-ezkit: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 27/35] Blackfin: bf527-ezkit: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 28/35] Blackfin: cm-bf548: convert to portmux framework   Mike Frysinger
• [U-Boot] [PATCH 29/35] Blackfin: bf561: use DMA for Core B L1 regions   Mike Frysinger
• [U-Boot] [PATCH 30/35] Blackfin: unify default I2C settings for ADI boards   Mike Frysinger
• [U-Boot] [PATCH 31/35] Blackfin: bfin_mac: remove space from name   Mike Frysinger
• [U-Boot] [PATCH 32/35] Blackfin: enable IP defrag for ADI boards   Mike Frysinger
• [U-Boot] [PATCH 33/35] Blackfin: bf527-ad7160-eval: new board support   Mike Frysinger
• [U-Boot] [PATCH 34/35] Blackfin: drop old u-boot.lds clean target   Mike Frysinger
• [U-Boot] [PATCH 35/35] Blackfin: bf561-acvilon: drop unused env redund define   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code   Mike Frysinger
• [U-Boot] [PATCH 3/3 v8] mmc: add generic mmc spi driver   Mike Frysinger
• [U-Boot] [PATCH] smc91xx_eeprom: Correct chip detection check.   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Mike Frysinger
• [U-Boot] [PATCH 1/2] i2c: soft_i2c: add simple GPIO implementation   Mike Frysinger
• [U-Boot] [PATCH 14/35] Blackfin: bfin_mac: convert to portmux framework   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH 1/5] Add basic errno support.   Mike Frysinger
• [U-Boot] [PATCH 0/5] New environment code   Mike Frysinger
• [U-Boot] [PATCH 0/5] New environment code   Mike Frysinger
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Mike Frysinger
• [U-Boot] USB CDC Branch: adding gadget for MUSB   Mike Frysinger
• [U-Boot] [PATCH 1/2 v2] i2c: soft_i2c: add simple GPIO implementation   Mike Frysinger
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Mike Frysinger
• [U-Boot] [PATCH] cmd editing: optimize/shrink output blanking   Mike Frysinger
• [U-Boot] [PATCH] mflash: use common cmd_usage function   Mike Frysinger
• [U-Boot] [PATCH] dataflash mmc mux: use common cmd_usage function   Mike Frysinger
• [U-Boot] [PATCH] print_buffer: optimize & shrink   Mike Frysinger
• [U-Boot] spi utility command support   Mike Frysinger
• [U-Boot] [PATCH 1/4] Blackfin: jtagconsole: disable output processing   Mike Frysinger
• [U-Boot] [PATCH 2/4] Blackfin: jtag-console: robustify against missing peer   Mike Frysinger
• [U-Boot] [PATCH 3/4] Blackfin: jtag-console: add debug markers   Mike Frysinger
• [U-Boot] [PATCH 4/4] Blackfin: jtag-console: handle newline stuffing   Mike Frysinger
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Mike Frysinger
• [U-Boot] splash screen handling in u-boot when booting an OS   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: gpio: use common usage func   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH] bootm: fix pointer warning with lzma   Mike Frysinger
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Mike Frysinger
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Mike Frysinger
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Mike Frysinger
• [U-Boot] [PATCH 1/3] miiphy: constify device name   Mike Frysinger
• [U-Boot] [PATCH 2/3] miiphy: unify device list lookup   Mike Frysinger
• [U-Boot] [PATCH 3/3] miiphy: leverage current_mii cache more   Mike Frysinger
• [U-Boot] spi utility command support   Mike Frysinger
• [U-Boot] [PATCH] Add support for Winbond W25Q64 SPI flash   Mike Frysinger
• [U-Boot] [PATCH] flash_protect: check for NULL flash info   Mike Frysinger
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] [PATCH] mflash: use common cmd_usage function   Mike Frysinger
• [U-Boot] fw_printenv is not working   Mike Frysinger
• [U-Boot] Add support for Winbond W25Q64 SPI flash (updated)   Mike Frysinger
• [U-Boot] [PATCH v2] Blackfin: gpio: use common usage func   Mike Frysinger
• [U-Boot] [PATCH v2] cmd_mmc: use common usage function   Mike Frysinger
• [U-Boot] [PATCH v2] dataflash mmc mux: use common cmd_usage function   Mike Frysinger
• [U-Boot] [PATCH v2] mflash: use common cmd_usage function   Mike Frysinger
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Matthias Fuchs
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Matthias Fuchs
• [U-Boot] mtd partition &kernel   Fundu
• [U-Boot] [PATCH V6 01/10] powerpc: Update configs to properly set FSL_ELBC   Kumar Gala
• [U-Boot] [PATCH V6 03/10] 83xx/85xx/86xx: LBC register cleanup   Kumar Gala
• [U-Boot] [PATCH V6 04/10] mpc85xx: tlb.c cleanups   Kumar Gala
• [U-Boot] [PATCH V6 05/10] mpc85xx: Add print_tlbcam() function   Kumar Gala
• [U-Boot] [PATCH V6 06/10] drivers/misc/fsl_law.c: Rearrange code to avoid duplication   Kumar Gala
• [U-Boot] [PATCH V6 07/10] fsl_law.c: Add print_laws() for FSL_CORENET platforms.   Kumar Gala
• [U-Boot] [PATCH V6 08/10] mpc85xx: Add reginfo command   Kumar Gala
• [U-Boot] [PATCH V6 09/10] powerpc 83xx/85xx: Merge lbc upmconfig code   Kumar Gala
• [U-Boot] [PATCH 1/2] fdt: Add fdt_translate_address to convert reg node to cpu phys addr   Kumar Gala
• [U-Boot] [PATCH 2/2] fdt: Add fdt_node_offset_by_compat_reg helper   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add recognition of e5500 core   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support for link stack & STAC on e5500   Kumar Gala
• [U-Boot] [PATCH][updated][85xx/p1_p2_rdb] PCIe E1000 card support added.   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [PATCH] [v3] powerpc: add support for the Freescale P1022DS reference board   Kumar Gala
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Move p1022ds slot code into board file   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/85xx: Move PCI/PCIe address defines into common immap_85xx.h   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliases   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641   Kumar Gala
• [U-Boot] [PATCH] fdt: Add function to alloc phandle values   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Convert MPC8572DS to using board common ICS307 code   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Convert MPC8536DS to using board common ICS307 code   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Move p1022ds slot code into board file   Kumar Gala
• [U-Boot] [PATCH v2] fdt: Add function to alloc phandle values   Kumar Gala
• [U-Boot] [PATCH v3] fdt: Add function to alloc phandle values   Kumar Gala
• [U-Boot] [PATCH] libfdt: introduce function fdt_get_max_phandle   Kumar Gala
• [U-Boot] [PATCH v3] fdt: Add function to alloc phandle values   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rework MPC8536 SERDES is_serdes_configured support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rework P1022 SERDES is_serdes_configured support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Move INIT_RAM_ADDR physical address to 36-bit space   Kumar Gala
• [U-Boot] [PATCH] powerpc/p2020: Move INIT_RAM_ADDR physical address higher for 36-bit for P2020DS   Kumar Gala
• [U-Boot] [PATCH 1/8] powerpc/8xxx: Enabled hwconfig for memory interleaving   Kumar Gala
• [U-Boot] [PATCH 2/8] powerpc/8xxx: Fix bug in memctrl interleaving & bank interleaving on cs0~cs4   Kumar Gala
• [U-Boot] [PATCH 3/8] powerpc/8xxx: Enable quad-rank DIMMs.   Kumar Gala
• [U-Boot] [PATCH 4/8] powerpc/8xxx: Enabled address hashing for 85xx   Kumar Gala
• [U-Boot] [PATCH 5/8] powerpc/8xxx: Enable DDR3 RDIMM support   Kumar Gala
• [U-Boot] [PATCH 6/8] powerpc/8xxx: Improvement to DDR parameters   Kumar Gala
• [U-Boot] [PATCH 7/8] powerpc/p2020ds: Integrated with P2020DS DDR change and enabled hwconfig   Kumar Gala
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Kumar Gala
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add command to report errata workarounds   Kumar Gala
• [U-Boot] [PATCH] p1022ds: fix indentation of case statement   Kumar Gala
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add command to report errata workarounds   Kumar Gala
• [U-Boot] [PATCH 2/2] powerpc/85xx: Report workaround of errata SATA-A001   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add command to report errata workarounds   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/85xx: Add recognition of e5500 core   Kumar Gala
• [U-Boot] [PATCH v4] Move ICS CLK chip frequency calculation code into a common board library   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add command to report errata workarounds   Kumar Gala
• [U-Boot] [PATCH v3] powerpc/85xx: Add command to report errata workarounds   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add additional p4080 platform related defines/structs   Kumar Gala
• [U-Boot] [PATCH] powerpc/fsl_fman: Add initial fman immap structures   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Use fdt_node_offset_by_compat_reg for clock-frequency updates   Kumar Gala
• [U-Boot] [PATCH] powerpc/p4080: Add setting of clock-frequency for clockgen node   Kumar Gala
• [U-Boot] [PATCH] powerpc/mpc85xx: Report FMAN # to match user manual   Kumar Gala
• [U-Boot] [PATCH] powerpc/p5020: Add various p5020 related defines (and p5010)   Kumar Gala
• [U-Boot] [PATCH] powerpc/p3041: Add various p3041 related defines   Kumar Gala
• [U-Boot] [PATCH] powerpc/p4080: Add support for CPC(Corenet platform cache) on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support to initialize LIODN registers and portals   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx [updated]   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx [updated]   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/85xx: Move PCI/PCIe address defines into common immap_85xx.h   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641   Kumar Gala
• [U-Boot] [PATCH 1/2] fdt: Add fdt_translate_address to convert reg node to cpu phys addr   Kumar Gala
• [U-Boot] [PATCH 2/2] fdt: Add fdt_node_offset_by_compat_reg helper   Kumar Gala
• [U-Boot] [PATCH 2/2] fdt: Add fdt_node_offset_by_compat_reg helper   Kumar Gala
• [U-Boot] [PATCH 1/2] fdt: Add fdt_translate_address to convert reg node to cpu phys addr   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliases   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Use fdt_node_offset_by_compat_reg for clock-frequency updates   Kumar Gala
• [U-Boot] [PATCH] powerpc/p4080: Add setting of clock-frequency for clockgen node   Kumar Gala
• [U-Boot] [PATCH] powerpc/p5020: Add various p5020 related defines (and p5010)   Kumar Gala
• [U-Boot] [PATCH] powerpc/p3041: Add various p3041 related defines   Kumar Gala
• [U-Boot] [PATCH] powerpc/mpc85xx: Report FMAN # to match user manual   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rework MPC8536 SERDES is_serdes_configured support   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rework P1022 SERDES is_serdes_configured support   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/85xx: Add additional p4080 platform related defines/structs   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] p1022ds: add audclk hwconfig setting enable codec reference clock   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/85xx: Add additional p4080 platform related defines/structs   Kumar Gala
• [U-Boot] [PATCH] powerpc/fsl_fman: Add initial fman immap structures   Kumar Gala
• [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Move INIT_RAM_ADDR physical address to 36-bit space   Kumar Gala
• [U-Boot] [PATCH] powerpc/p2020: Move INIT_RAM_ADDR physical address higher for 36-bit for P2020DS   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board   Kumar Gala
• [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES   Kumar Gala
• [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8   Kumar Gala
• [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Add support to initialize LIODN registers and portals   Kumar Gala
• [U-Boot] [PATCH] powerpc/p4080: Add support for CPC(Corenet platform cache) on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH v3] fdt: Add function to alloc phandle values   Kumar Gala
• [U-Boot] [PATCH 1/8] powerpc/8xxx: Enabled hwconfig for memory interleaving   Kumar Gala
• [U-Boot] [PATCH 2/8] powerpc/8xxx: Fix bug in memctrl interleaving & bank interleaving on cs0~cs4   Kumar Gala
• [U-Boot] [PATCH 3/8] powerpc/8xxx: Enable quad-rank DIMMs.   Kumar Gala
• [U-Boot] [PATCH 4/8] powerpc/8xxx: Enabled address hashing for 85xx   Kumar Gala
• [U-Boot] [PATCH 5/8] powerpc/8xxx: Enable DDR3 RDIMM support   Kumar Gala
• [U-Boot] [PATCH 6/8] powerpc/8xxx: Improvement to DDR parameters   Kumar Gala
• [U-Boot] [PATCH 7/8] powerpc/p2020ds: Integrated with P2020DS DDR change and enabled hwconfig   Kumar Gala
• [U-Boot] [PATCH 2/2] powerpc/8xxx: query feature reporting register for num cores on unknown cpus   Kumar Gala
• [U-Boot] [PATCH 1/2] powerpc/85xx: configure autocompletion support   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board   Kumar Gala
• [U-Boot] [PATCH v3] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] [PATCH v3] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] [PATCH v3] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] [PATCH v4] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] [PATCH v3 0/4] mtdparts: add bad-block skipping   Ben Gardiner
• [U-Boot] [PATCH v3 1/4] mtdparts: regroup calls to get_mtd_device_nm   Ben Gardiner
• [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v3 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v3 4/4] mtdparts: new add.e: add part skipping bad blocks   Ben Gardiner
• [U-Boot] handling of bad blocks in nand   Ben Gardiner
• [U-Boot] [PATCH v4] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] [PATCH v3 0/4] mtdparts: add bad-block skipping   Ben Gardiner
• [U-Boot] [PATCH] NAND: formatting cleanups from env.oob support   Ben Gardiner
• [U-Boot] [PATCH v4] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Ben Gardiner
• [U-Boot] mtd partition &kernel   Ben Gardiner
• [U-Boot] mtd partition &kernel   Ben Gardiner
• [U-Boot] spi utility command support   Robin Getz
• [U-Boot] Hoe to post a PATCH for rsk7203?   Fabio Giovagnini
• [U-Boot] Hoe to post a PATCH for rsk7203?   Fabio Giovagnini
• [U-Boot] Why Do I need reloct_dst to boot u-boot?   Fabio Giovagnini
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Fabio Giovagnini
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Fabio Giovagnini
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Fabio Giovagnini
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Fabio Giovagnini
• [U-Boot] u-boot for rsk7203   Fabio Giovagnini
• [U-Boot] u-boot for rsk7203 - stand by control register problem   Fabio Giovagnini
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Fabio Giovagnini
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Fabio Giovagnini
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Fabio Giovagnini
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Fabio Giovagnini
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Fabio Giovagnini
• [U-Boot] u-boot for rsk7203   Fabio Giovagnini
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Fabio Giovagnini
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Fabio Giovagnini
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Fabio Giovagnini
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Fabio Giovagnini
• [U-Boot] u-boot for rsk7203   Fabio Giovagnini
• [U-Boot] Question about patches   Fabio Giovagnini
• [U-Boot] Question about patches   Fabio Giovagnini
• [U-Boot] Question about patches   Fabio Giovagnini
• [U-Boot] [PATCH 1/3] at91: Defined main clock frequency on esd at91 boards   Daniel Gorsulowski
• [U-Boot] [PATCH 2/3] at91: Update meesc board to new SoC access   Daniel Gorsulowski
• [U-Boot] [PATCH 3/3] at91: Enabeling USB host on meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 1/3] at91: Defined main clock frequency on esd at91 boards   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 2/3] at91: Update meesc board to new SoC access   Daniel Gorsulowski
• [U-Boot] [PATCH-V2 3/3] at91: Enabeling USB host on meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH-V3] at91: Update meesc board to new SoC access   Daniel Gorsulowski
• [U-Boot] [PATCH-V4] at91: Update meesc board to new SoC access   Daniel Gorsulowski
• [U-Boot] omap3 dram_init not calling get_sdr_cs_size() for second bank   Michael Grundy
• [U-Boot] Support for SD/MMC for davinci boards ?   Rupesh Gujare
• [U-Boot] Support for SD/MMC for davinci boards ?   Rupesh Gujare
• [U-Boot] [PATCH] musb: fix compilation warning   Ajay Kumar Gupta
• [U-Boot] [PATCH 0/4] AM35X: Add musb support   Ajay Kumar Gupta
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/4] musb: MSC host support for AM35x   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4] musb: am35x: Workaround for fifo read issue   Ajay Kumar Gupta
• [U-Boot] [PATCH 4/4] AM3517EVM: musb: add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Gupta, Ajay Kumar
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Gupta, Ajay Kumar
• [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support   Ajay Kumar Gupta
• [U-Boot] [PATCH 1/4 v2] AM35x: Adding SCM general register definitions   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v2] musb: am35x: Workaround for fifo read issue   Ajay Kumar Gupta
• [U-Boot] [PATCH 4/4] AM3517EVM: musb: add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support   Gupta, Ajay Kumar
• [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support   Gupta, Ajay Kumar
• [U-Boot] Hoe to post a PATCH for rsk7203?   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH V2 2/3] video: add support for display controller in MB86R0x SoCs   Anatolij Gustschin
• [U-Boot] [PATCH V2 3/3] arm: Add support for jadecpu board based on MB86R01 SoC   Anatolij Gustschin
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Li Haibo
• [U-Boot] Hello,   Joy Hasler
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] (imp) uboot image size   Sagar Heroorkar
• [U-Boot] (imp) uboot image size   Sagar Heroorkar
• [U-Boot] (imp) uboot image size   Sagar Heroorkar
• [U-Boot] (imp) uboot image size   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] uboot redundancy.   Sagar Heroorkar
• [U-Boot] U-Boot Digest, Vol 26, Issue 18   Billy Huang
• [U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.   Bradley Hughes
• [U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.   Bradley Hughes
• [U-Boot] Hope Your Having A Great Summer   Couture Brands Inc.
• [U-Boot] A Beautiful Summer   Couture Brands Inc.
• [U-Boot] Hope Your Having A Great Summer   Couture Brands Inc.
• [U-Boot] [GIT PULL] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] u-boot for rsk7203   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 01/11] sh: Update lowlevel_init.S of rsk7203   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 02/11] sh: Update lowlevel_init.S of sh7785lcr   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 03/11] sh: Update lowlevel_init.S of MigoR   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 04/11] sh: Update lowlevel_init.S of sh7763rdp   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 05/11] sh: Update lowlevel_init.S of espt-giga   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 06/11] sh: Update lowlevel_init.S of r2dplus   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 07/11] sh: Update lowlevel_init.S of ap325rxa   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 08/11] sh: Add support do_bdinfo function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 09/11] sh: Update lowlevel_init.S of ms7720se   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 10/11] sh: Update lowlevel_init.S of ms7750se   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 11/11] sh: Update lowlevel_init.S of mpr2   Nobuhiro Iwamatsu
• [U-Boot] u-boot for rsk7203   Nobuhiro Iwamatsu
• [U-Boot] problems building uboot 2010.03 for the P2020DS board   Rajat Jain
• [U-Boot] u-boot ls cmd oops Unknown node type.   H. Johnny
• [U-Boot] [PATCH v3] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Vipin KUMAR
• [U-Boot] [PATCH 00/28] Support for SPEAr13xx boards added   Vipin KUMAR
• [U-Boot] [PATCH 01/28] change_bit routine defined   Vipin KUMAR
• [U-Boot] [PATCH 02/28] SPEAr : SMI erase and write timeouts increased   Vipin KUMAR
• [U-Boot] [PATCH 03/28] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET   Vipin KUMAR
• [U-Boot] [PATCH 04/28] SPEAr : Reducing the max RAM size to 128MB   Vipin KUMAR
• [U-Boot] [PATCH 05/28] SPEAr : Basic arch related support added for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH 06/28] SPEAr : Network support configured for spear SoCs   Vipin KUMAR
• [U-Boot] [PATCH 07/28] SPEAr : macb driver support added for spear310 and spear320   Vipin KUMAR
• [U-Boot] [PATCH 08/28] SPEAr : FSMC driver support added   Vipin KUMAR
• [U-Boot] [PATCH 09/28] SPEAr : Configuring FSMC driver for NAND interface   Vipin KUMAR
• [U-Boot] [PATCH 10/28] SPEAr : i2c driver moved completely into drivers/i2c   Vipin KUMAR
• [U-Boot] [PATCH 11/28] SPEAr : smi driver moved completely into drivers/mtd   Vipin KUMAR
• [U-Boot] [PATCH 12/28] SPEAr : USB Device Controller driver support added   Vipin KUMAR
• [U-Boot] [PATCH 13/28] SPEAr : Supporting various configurations for spear3xx and spear6xx boards   Vipin KUMAR
• [U-Boot] [PATCH 14/28] SPEAr : Basic spear1300 architecture support added   Vipin KUMAR
• [U-Boot] [PATCH 15/28] SPEAr : spear1300 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH 16/28] SPEAr : Removing extraneous code   Vipin KUMAR
• [U-Boot] [PATCH 17/28] SPEAr : USB device controller bugfixes   Vipin KUMAR
• [U-Boot] [PATCH 18/28] SPEAr : Network driver fixes.   Vipin KUMAR
• [U-Boot] [PATCH 19/28] SPEAr : Changing the default environment variable bootargs   Vipin KUMAR
• [U-Boot] [PATCH 20/28] SPEAr1300: Workaround the UHC problem (issue #101435)   Vipin KUMAR
• [U-Boot] [PATCH 21/28] Enable high speed support for usb device framework and usbtty   Vipin KUMAR
• [U-Boot] [PATCH 22/28] SPEAr : High speed support for designware peripheral   Vipin KUMAR
• [U-Boot] [PATCH 23/28] SPEAr : Enable usb device high speed support   Vipin KUMAR
• [U-Boot] [PATCH 24/28] SPEAr : Network support configuration   Vipin KUMAR
• [U-Boot] [PATCH 25/28] SPEAr : Enabling GPT clock explicitly   Vipin KUMAR
• [U-Boot] [PATCH 26/28] SPEAr : smi_init moved to board_init   Vipin KUMAR
• [U-Boot] [PATCH 27/28] SPEAr : Ethernet issue workaround is not needed when uboot is acting as flashing   Vipin KUMAR
• [U-Boot] [PATCH 28/28] SPEAr1310 : spear1310 support added   Vipin KUMAR
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Vipin KUMAR
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Vipin KUMAR
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Vipin KUMAR
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Vipin KUMAR
• [U-Boot] [PATCH 15/28] SPEAr : spear1300 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH 13/28] SPEAr : Supporting various configurations for spear3xx and spear6xx boards   Vipin KUMAR
• [U-Boot] Question about patches   Vipin KUMAR
• [U-Boot] Question about patches   Vipin KUMAR
• [U-Boot] boards.cfg: add missing entries for am3517_evm and s5p_goni   Minkyu Kang
• [U-Boot] [PATCH] boards.cfg: add missing definitions for am3517_evm and s5p_goni   Minkyu Kang
• [U-Boot] [PATCH v2] ARM: Align stack to 8 bytes   Minkyu Kang
• [U-Boot] [U-BOOT][PATCH]mmc: modify setting tran_speed and change csd's instead of response value   Minkyu Kang
• [U-Boot] SAMSUNG: serial: remove compiler warnings   Minkyu Kang
• [U-Boot] [PATCH 1/2] S5P: support mmc driver   Minkyu Kang
• [U-Boot] [PATCH 2/2] s5p_goni: enable mmc0   Minkyu Kang
• [U-Boot] SAMSUNG: serial: remove compiler warnings   Minkyu Kang
• [U-Boot] [PATCH 1/2] S5P: support mmc driver   Minkyu Kang
• [U-Boot] Too Much Email   Michelle Konzack
• [U-Boot] ubifsmount fails after booting linux   Karl Krach
• [U-Boot] ubifsmount fails after booting linux   Karl Krach
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Martin Krause
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Martin Krause
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Tor Krill
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Tor Krill
• [U-Boot] [PATCH 4/5] Remove support for CONFIG_HAS_UID and "forceenv" command   Sergey Kubushyn
• [U-Boot] [PATCH] [mips] add $(ENDIANNESS) option when link hello_world example   Shinya Kuribayashi
• [U-Boot] [PATCH] [mips] add $(ENDIANNESS) option when link hello_world example   Shinya Kuribayashi
• [U-Boot] USB CDC branch   Vitaly Kuzmichev
• [U-Boot] USB CDC branch   Vitaly Kuzmichev
• [U-Boot] USB CDC branch   Vitaly Kuzmichev
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   William C. Landolina
• [U-Boot] [PATCH] Drop support for GTH board   Thomas Lange
• [U-Boot] [PATCH v2] Drop support for GTH board   Thomas Lange
• [U-Boot] [PATCH v3] Drop support for GTH board   Thomas Lange
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Guennadi Liakhovetski
• [U-Boot] Hi All, is anybody involved into Renesas SH development?   Guennadi Liakhovetski
• [U-Boot] MX31PDK not booting with U-boot v2010.06   Magnus Lilja
• [U-Boot] question about add new board to MAKEALL   "Xiangfu Liu(刘向富)"
• [U-Boot] question about example/standalone/mips.lds   "Xiangfu Liu(刘向富)"
• [U-Boot] Too Much Email   "Xiangfu Liu(刘向富)"
• [U-Boot] question about add new board to MAKEALL   "Xiangfu Liu(刘向富)"
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   "Xiangfu Liu(刘向富)"
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   "Xiangfu Liu(刘向富)"
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Jason Liu
• [U-Boot] question about example/standalone/mips.lds   Xiangfu Liu
• [U-Boot] Question about patches   Xiangfu Liu
• [U-Boot] question about add new board to MAKEALL   Xiangfu Liu
• [U-Boot] question about example/standalone/mips.lds   Xiangfu Liu
• [U-Boot] question about add new board to MAKEALL   Xiangfu Liu
• [U-Boot] Question about patches   Xiangfu Liu
• [U-Boot] question about add new board to MAKEALL   Xiangfu Liu
• [U-Boot] question about example/standalone/mips.lds   Xiangfu Liu
• [U-Boot] [PATCH] [mips] add $(ENDIANNESS) option when link hello_world example   Xiangfu Liu
• [U-Boot] [PATCH] [mips] add $(ENDIANNESS) option when link hello_world example   Xiangfu Liu
• [U-Boot] Cuenta temporalmente bloqueada !   CAJA MADRID
• [U-Boot] watchdog not working for PPC   Mark Maestas
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Matthew McClintock
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Matthew McClintock
• [U-Boot] [PATCH v2] nios2: remove EP1C20, EP1S10, EP1S40 boards   Scott McNutt
• [U-Boot] [Nios] Pull Request   Scott McNutt
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Nishanth Menon
• [U-Boot] [PATCH 8/8] ARMV7: Update default environment for OMAP4 boards   Nishanth Menon
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Nishanth Menon
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Nishanth Menon
• [U-Boot] MPC8536DS SD u-boot issue   Frans Meulenbroeks
• [U-Boot] funny/faulty message   Frans Meulenbroeks
• [U-Boot] [PATCH 1/2] various cmd_* files: remove the command name from the help message   Frans Meulenbroeks
• [U-Boot] [PATCH 2/2] various cmd_* files: fixed layout a little bit   Frans Meulenbroeks
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded test   Frans Meulenbroeks
• [U-Boot] [PATCH 1/2] drivers/mmc/fsl_esdhc.c: increase timeout   Frans Meulenbroeks
• [U-Boot] [PATCH 2/2] drivers/mmc/fsl_esdhc.c: reordered tests   Frans Meulenbroeks
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded test   Frans Meulenbroeks
• [U-Boot] AT91SAM9xxx SDCard/MMC support?   Reinhard Meyer
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Reinhard Meyer
• [U-Boot] cmd_date.c error or itention?   Reinhard Meyer
• [U-Boot] cmd_date.c error or itention?   Reinhard Meyer
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Reinhard Meyer
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Reinhard Meyer
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Reinhard Meyer
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Reinhard Meyer
• [U-Boot] [PATCH] i2c: fix SDA contention in read_byte()   Reinhard Meyer
• [U-Boot] U-boot and AT91SAM9263-EK   Reinhard Meyer
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Reinhard Meyer
• [U-Boot] [PATCH 13/28] SPEAr : Supporting various configurations for spear3xx and spear6xx boards   Reinhard Meyer
• [U-Boot] [PATCH 0/5] New environment code   Reinhard Meyer
• [U-Boot] [PATCH 0/5] New environment code   Reinhard Meyer
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Reinhard Meyer
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] How can i add intterrupt for AT91SAM9260EK board   Reinhard Meyer
• [U-Boot] How can i add intterrupt for AT91SAM9260EK board   Reinhard Meyer
• [U-Boot] How to handle binary data file in u-boot   Reinhard Meyer
• [U-Boot] Too Much Email   Moran, Jack
• [U-Boot] Booting with kernel and root fs in JFFS2 flash?   Adam Moskowitz
• [U-Boot] Booting with kernel and root fs in JFFS2 flash?   Adam Moskowitz
• [U-Boot] [PATCH] da830 evm: Fix checkpatch error on 'pinmux' macro   Prakash PM
• [U-Boot] [PATCH] da850 evm: Fix definition of 'pinmux' macro   Prakash PM
• [U-Boot] [PATCH] ext2fs: Fix optimization bug for doubly-indirect block pointers   Aaron Pace
• [U-Boot] [PATCH] ext2fs: Fix optimization bug for doubly-indirect block pointers   Aaron Pace
• [U-Boot] USB CDC branch   Kyungmin Park
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Paulraj, Sandeep
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Paulraj, Sandeep
• [U-Boot] boards.cfg: add missing entries for am3517_evm and s5p_goni   Paulraj, Sandeep
• [U-Boot] [PATCH] Davinci: SPI: add the missing v2 patch changes   Paulraj, Sandeep
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Paulraj, Sandeep
• [U-Boot] add function prototype for mmc_set_dev in mmc.h   Paulraj, Sandeep
• [U-Boot] boards.cfg: add missing entries for am3517_evm and s5p_goni   Paulraj, Sandeep
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Paulraj, Sandeep
• [U-Boot] [PATCH] musb: fix compilation warning   Paulraj, Sandeep
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Paulraj, Sandeep
• [U-Boot] [PATCH 1/4] AM35x: Adding SCM general register definitions   Paulraj, Sandeep
• [U-Boot] davinci: lowlevel_init for davinci boards   Paulraj, Sandeep
• [U-Boot] davinci: lowlevel_init for davinci boards   Paulraj, Sandeep
• [U-Boot] Support for SD/MMC for davinci boards ?   Paulraj, Sandeep
• [U-Boot] Support for SD/MMC for davinci boards ?   Paulraj, Sandeep
• [U-Boot] Support for SD/MMC for davinci boards ?   Paulraj, Sandeep
• [U-Boot] [PATCH] ARMV7: Add basic gpmc initialization for OMAP4   Paulraj, Sandeep
• [U-Boot] [PATCH] ARMV7: Add basic gpmc initialization for OMAP4   Paulraj, Sandeep
• [U-Boot] [PATCH] musb: fix compilation warning   Paulraj, Sandeep
• [U-Boot] [PATCH] da830 evm: Fix checkpatch error on 'pinmux' macro   Paulraj, Sandeep
• [U-Boot] [PATCH] da850 evm: Fix definition of 'pinmux' macro   Paulraj, Sandeep
• [U-Boot] [PULL] U-Boot-pxa   Paulraj, Sandeep
• [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support   Paulraj, Sandeep
• [U-Boot] [PATCH 0/2] ARMV7: Add support for the Versatile Express Quad Cortex A9 platform   Paulraj, Sandeep
• [U-Boot] [PATCH] Add support for Winbond W25Q64 SPI flash   Paulraj, Sandeep
• [U-Boot] Dataflash timeout error when changing clock speed   Neal Peacock
• [U-Boot] Fwd: FW: [PATCH 1/2] ARMV7: Versatile Express Coretile quad-core Cortex-A9 support   Peter Pearse
• [U-Boot] [PATCH V2 0/2] ARMV7: Add support for Versatile Express CortexA9x4   Peter Pearse
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale   Kim Phillips
• [U-Boot] 83xx: add support for ve8313 board   Kim Phillips
• [U-Boot] [PATCH 1/2] mpc8308: support for Freescale MPC8308 cpu   Kim Phillips
• [U-Boot] [PATCH 2/2] MPC8308RDB: minimal support for devboard from Freescale   Kim Phillips
• [U-Boot] [PATCH v3] 83xx: add support for ve8313 board   Kim Phillips
• [U-Boot] [GIT PULL] u-boot-mpc83xx: support for mpc8308rdb and ve8313 boards   Kim Phillips
• [U-Boot] [PATCH 1/2] powerpc/85xx: configure autocompletion support   Kim Phillips
• [U-Boot] [PATCH 2/2] powerpc/8xxx: query feature reporting register for num cores on unknown cpus   Kim Phillips
• [U-Boot] [PATCH] common: add a grepenv command   Kim Phillips
• [U-Boot] [PATCH] common: add a grepenv command   Kim Phillips
• [U-Boot] [PATCH 2/2] remove main CHANGELOG file   Kim Phillips
• [U-Boot] [PATCH] common: add a grepenv command   Kim Phillips
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale   Kim Phillips
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Kim Phillips
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Kim Phillips
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Kim Phillips
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Kim Phillips
• [U-Boot] Please pull u-boot-mpc85xx.git   Kim Phillips
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Kim Phillips
• [U-Boot] [PATCH] net: rename "FSL UECx" net interfaces "UECx"   Kim Phillips
• [U-Boot] [PATCH] cfi_flash: flinfo: allow user interrupt in flash print info fn   Kim Phillips
• [U-Boot] New photos for you on Facebook   Facebook Friends Photos
• [U-Boot] u-boot at lists.denx.de   Google Promo
• [U-Boot] [PATCH v2]ppc4xx/Canyonlands added USB board callbacks   Felix Radensky
• [U-Boot] Supporting two boards which are almost similar   Sudhakar Rajashekhara
• [U-Boot] Driver for CONFIG_CF_QSPI   Richard Retanubun
• [U-Boot] [PATCH] ppc4xx: Enable booting with Option E on 460EX/EXr/GT   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable PCIe support without PCI support on PPC440/460   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable overwriting of default scan window for IBM DDR2 controller   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boards   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as well   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460   Stefan Roese
• [U-Boot] [PATCH v3] ppc4xx: Add T3COPR board support (PPC460GT based)   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Stefan Roese
• [U-Boot] [PATCH v2]ppc4xx/Canyonlands added USB board callbacks   Stefan Roese
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Stefan Roese
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Stefan Roese
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: T3CORP fixes and updates   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] Nor Flash SST39VF6402B cfi compliant support   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] [PATCH 1/2] ppc4xx: Only define DDR2 registers for the correct PowerPC variants   Stefan Roese
• [U-Boot] [PATCH 2/2] ppc4xx: DDR/ECC: Use correct macros to clear error status   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add "ecctest" command to test/simulate ECC errors   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add ECC status info to machine-check exception for IBM DDR2 core   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable "ecctest" command on katmai   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable "ecctest" command on t3corp   Stefan Roese
• [U-Boot] [PATCH v3]ppc4xx/Canyonlands added USB board callbacks   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: T3CORP fixes and updates   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values   Stefan Roese
• [U-Boot] [PATCH 1/2] ppc4xx: Only define DDR2 registers for the correct PowerPC variants   Stefan Roese
• [U-Boot] [PATCH 2/2] ppc4xx: DDR/ECC: Use correct macros to clear error status   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add "ecctest" command to test/simulate ECC errors   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add ECC status info to machine-check exception for IBM DDR2 core   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable "ecctest" command on katmai   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable "ecctest" command on t3corp   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Alessandro Rubini
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Alessandro Rubini
• [U-Boot] u-boot-2010.03 build errors with USE_PRIVATE_LIBGCC=yes option   Dennis Ruffer
• [U-Boot] uboot redundancy.   Graeme Russ
• [U-Boot] Question about patches   Graeme Russ
• [U-Boot] Question about patches   Graeme Russ
• [U-Boot] Question about patches   Graeme Russ
• [U-Boot] [PATCH v4 3/6] ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4   Steve Sakoman
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Steve Sakoman
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Steve Sakoman
• [U-Boot] Micrel Controller KSZ8841-16MBL   Steve Sakoman
• [U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda   Steve Sakoman
• [U-Boot] boards.cfg: add missing entries for am3517_evm and s5p_goni   Steve Sakoman
• [U-Boot] mmc: add function prototype for mmc_set_dev in mmc.h   Steve Sakoman
• [U-Boot] [PATCH] ARMV7: Add basic gpmc initialization for OMAP4   Steve Sakoman
• [U-Boot] [PATCH 0/8] ARMV7: Enhance support for OMAP4   Steve Sakoman
• [U-Boot] [PATCH 1/8] ARMV7: Add pad mux support for OMAP4   Steve Sakoman
• [U-Boot] [PATCH 2/8] ARMV7: Fix udelay for OMAP4   Steve Sakoman
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Steve Sakoman
• [U-Boot] [PATCH 4/8] ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems   Steve Sakoman
• [U-Boot] [PATCH 5/8] ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and OMAP4   Steve Sakoman
• [U-Boot] [PATCH 6/8] ARMV7: Enable musb driver and usbtty on OMAP4430 SDP   Steve Sakoman
• [U-Boot] [PATCH 7/8] ARMV7: Enable musb driver and usbtty on OMAP4 Panda   Steve Sakoman
• [U-Boot] [PATCH 8/8] ARMV7: Update default environment for OMAP4 boards   Steve Sakoman
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Steve Sakoman
• [U-Boot] [PATCH 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 0/8] ARMV7: Enhance support for OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 1/8] ARMV7: Add pad mux support for OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 2/8] ARMV7: Fix udelay for OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 4/8] ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems   Steve Sakoman
• [U-Boot] [PATCH v2 5/8] ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and OMAP4   Steve Sakoman
• [U-Boot] [PATCH v2 6/8] ARMV7: Enable musb driver and usbtty on OMAP4430 SDP   Steve Sakoman
• [U-Boot] [PATCH v2 7/8] ARMV7: Enable musb driver and usbtty on OMAP4 Panda   Steve Sakoman
• [U-Boot] [PATCH v2 8/8] ARMV7: Update default environment for OMAP4 boards   Steve Sakoman
• [U-Boot] [PATCH v2 0/8] ARMV7: Enhance support for OMAP4   Steve Sakoman
• [U-Boot] Problem compiling u-boot for microblaze, libpost.a not found   Carlos Salvador Pérez Salgado
• [U-Boot] Support for SD/MMC for davinci boards ?   Alagu Sankar
• [U-Boot] [PATCH v1]ppc4xx/Canyonlands added USB board callbacks   Rupjyoti Sarmah
• [U-Boot] [PATCH v1]ppc4xx/Canyonlands added USB board callbacks   Rupjyoti Sarmah
• [U-Boot] [PATCH v2]ppc4xx/Canyonlands added USB board callbacks   Rupjyoti Sarmah
• [U-Boot] [PATCH v2]ppc4xx/Canyonlands added USB board callbacks   Rupjyoti Sarmah
• [U-Boot] [PATCH v3]ppc4xx/Canyonlands added USB board callbacks   Rupjyoti Sarmah
• [U-Boot] net, tsec: add micrel ksz804 phy   Heiko Schocher
• [U-Boot] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH 2/2] Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code   Heiko Schocher
• [U-Boot] [PATCH 30/35] Blackfin: unify default I2C settings for ADI boards   Heiko Schocher
• [U-Boot] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH v2] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH v3] 83xx: add support for ve8313 board   Heiko Schocher
• [U-Boot] [PATCH 1/2] 8xx, kup4: minor configuration changes   Heiko Schocher
• [U-Boot] [PATCH 2/2] 8xx, kup4: add FDT support   Heiko Schocher
• [U-Boot] [PATCH 1/2 v2] 8xx, kup4: minor configuration changes   Heiko Schocher
• [U-Boot] [PATCH 2/2 v2] 8xx, kup4: add FDT support   Heiko Schocher
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Heiko Schocher
• [U-Boot] [PATCH 1/2 v3] 8xx, kup4: minor configuration changes   Heiko Schocher
• [U-Boot] [PATCH 2/2 v3] 8xx, kup4: add FDT support   Heiko Schocher
• [U-Boot] [PATCH v2] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Heiko Schocher
• [U-Boot] [PATCH v3] net ppc: fix ethernet device names with spaces   Heiko Schocher
• [U-Boot] [PATCH 1/2 v2] i2c: soft_i2c: add simple GPIO implementation   Heiko Schocher
• [U-Boot] Pull request: u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH v2 3/8] ARMV7: Modify i2c driver for more reliable operation on OMAP4   Heiko Schocher
• [U-Boot] [PATCH] ppc4xx: Fix building of sc3 board   Heiko Schocher
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [RFC][PATCH 01/19] arm: get rid of bi_env   Heiko Schocher
• [U-Boot] [RFC][PATCH 02/19] relocation: fixup cmdtable   Heiko Schocher
• [U-Boot] [RFC][PATCH 03/19] common: move TOTAL_MALLOC_LEN to include/common.h   Heiko Schocher
• [U-Boot] [RFC][PATCH 04/19] arm, arm1136, qong: add relocation support   Heiko Schocher
• [U-Boot] [RFC][PATCH 05/19] arm, arm1136: all arm1136 boards converted to new relocation   Heiko Schocher
• [U-Boot] [RFC][PATCH 06/19] arm, bdinfo: print some more infos.   Heiko Schocher
• [U-Boot] [RFC][PATCH 07/19] arm, relocation: add documentation   Heiko Schocher
• [U-Boot] [RFC][PATCH 08/19] i2c: fix command usage help   Heiko Schocher
• [U-Boot] [RFC][PATCH 09/19] i2c, omap24xx: only set bus_initialized, if uboot is relocated   Heiko Schocher
• [U-Boot] [RFC][PATCH 10/19] part: fix relocation fixup   Heiko Schocher
• [U-Boot] [RFC][PATCH 11/19] cortexa8, beagle: add relocation support   Heiko Schocher
• [U-Boot] [RFC][PATCH 12/19] arm, cortexa8: all arm_cortexa8 based boards converted   Heiko Schocher
• [U-Boot] [RFC][PATCH 13/19] arm926, tx25: add relocation   Heiko Schocher
• [U-Boot] [RFC][PATCH 14/19] nand_fsl_nfc: get rid of local var   Heiko Schocher
• [U-Boot] [RFC][PATCH 15/19] arm, 926: convert all arm926ejs based board   Heiko Schocher
• [U-Boot] [RFC][PATCH 16/19] arm926: flush cache for arm926   Heiko Schocher
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] [RFC][PATCH 18/19] beagle, cache: activate cache command   Heiko Schocher
• [U-Boot] [RFC][PATCH 19/19] arm1136, dcache: enable cache command for qong board   Heiko Schocher
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [RFC][PATCH 02/19] relocation: fixup cmdtable   Heiko Schocher
• [U-Boot] [RFC][PATCH 08/19] i2c: fix command usage help   Heiko Schocher
• [U-Boot] [RFC][PATCH 14/19] nand_fsl_nfc: get rid of local var   Heiko Schocher
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] Question on non-muxed eLBC at Freescale PQ II/III   André Schwarz
• [U-Boot] Virtual Private Answering Service - Never Miss A Call Again!   Private Virtual Live Answering Service!
• [U-Boot] Virtual Private Answering Service - Never Miss A Call Again!   Private Virtual Live Answering Service!
• [U-Boot] Virtual Private Answering Service - Never Miss A Call Again!   Private Virtual Live Answering Service!
• [U-Boot] Virtual Private Answering Service - Never Miss A Call Again!   Private Virtual Live Answering Service!
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Jim Sheldon
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Sergei Shtylyov
• [U-Boot] [PATCH] fdt: Add function to alloc phandle values   Sergei Shtylyov
• [U-Boot] Problem compiling u-boot for microblaze, libpost.a not found   Michal Simek
• [U-Boot] Microblaze sp601 support - old [Re: U-Boot Digest, Vol 26, Issue 18]   Michal Simek
• [U-Boot] Adds driver for Xilinx' xps_spi SPI controller   Graeme Smecher
• [U-Boot] [PATCH] Adds driver for Xilinx' xps_spi SPI controller   Graeme Smecher
• [U-Boot] [PATCH] Adds driver for Xilinx' xps_spi SPI controller   Graeme Smecher
• [U-Boot] Add support for Winbond W25Q64 SPI flash   Graeme Smecher
• [U-Boot] [PATCH] Add support for Winbond W25Q64 SPI flash   Graeme Smecher
• [U-Boot] Add support for Winbond W25Q64 SPI flash (updated)   Graeme Smecher
• [U-Boot] [PATCH] Add support for Winbond W25Q64 SPI flash   Graeme Smecher
• [U-Boot] Need New Clients   Smart Biz Solutions
• [U-Boot] transfer enviroment per file (problems with TAB) ?   Arno Steffen
• [U-Boot] handling of bad blocks in nand   Arno Steffen
• [U-Boot] Booting with kernel and root fs in JFFS2 flash?   Alexander Stein
• [U-Boot] U-boot and AT91SAM9263-EK   Alexander Stein
• [U-Boot] Does u-boot support CFI for NOR flash interleaving?   Alexander Stein
• [U-Boot] [PATCH] atmel_lcd: Allow contrast polarity to be either positive or negative   Alexander Stein
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Alexander Stein
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Alexander Stein
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Alexander Stein
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Alexander Stein
• [U-Boot] [PATCH] at91: Don't initialize watchdog if CONFIG_SYS_WDTC_WDMR_VAL is undefined   Alexander Stein
• [U-Boot] [PATCH v2] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is undefined   Alexander Stein
• [U-Boot] [PATCH v3] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is undefined   Alexander Stein
• [U-Boot] How can i add intterrupt for AT91SAM9260EK board   Alexander Stein
• [U-Boot] Unable to save environment variable in NOR Flash   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] FW: Need Your Help   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   York Sun
• [U-Boot] help on POST   York Sun
• [U-Boot] help on POST   York Sun
• [U-Boot] fdt_resize() bug caused "WARNING: could not set linux, initrd-start FDT_ERR_NOSPACE."   Timur Tabi
• [U-Boot] [PATCH 3/4] powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641   Timur Tabi
• [U-Boot] [PATCH 3/4] powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641   Timur Tabi
• [U-Boot] [PATCH] fdt: Add function to alloc phandle values   Timur Tabi
• [U-Boot] [PATCH v3] fdt: Add function to alloc phandle values   Timur Tabi
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Timur Tabi
• [U-Boot] [PATCH] p1022ds: fix indentation of case statement   Timur Tabi
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   Timur Tabi
• [U-Boot] [PATCH] p1022ds: add audclk hwconfig setting enable codec reference clock   Timur Tabi
• [U-Boot] [PATCH] [v2] p1022ds: add audclk hwconfig setting enable codec reference clock   Timur Tabi
• [U-Boot] [PATCH] p1022ds: add audclk hwconfig setting enable codec reference clock   Timur Tabi
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Lv Terry-R65388
• [U-Boot] How to handle binary data file in u-boot   Lv Terry-R65388
• [U-Boot] How to handle binary data file in u-boot   Lv Terry-R65388
• [U-Boot] [PATCH] Davinci: SPI: add the missing v2 patch changes   Nick Thompson
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Nick Thompson
• [U-Boot] [RFC][PATCH 17/19] arm cp15: setup mmu and enable dcache   Nick Thompson
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Tabi Timur-B04825
• [U-Boot] uboot redundancy.   Joakim Tjernlund
• [U-Boot] uboot redundancy.   Joakim Tjernlund
• [U-Boot] uboot redundancy.   Joakim Tjernlund
• [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board   Peter Tyser
• [U-Boot] [RFC][PATCH 02/19] relocation: fixup cmdtable   Peter Tyser
• [U-Boot] [RFC][PATCH 08/19] i2c: fix command usage help   Peter Tyser
• [U-Boot] [RFC][PATCH 02/19] relocation: fixup cmdtable   Peter Tyser
• [U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]   Marek Vasut
• [U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]   Marek Vasut
• [U-Boot] [PATCH 1/5] Enable PXAFB for PXA27X and PXA3XX   Marek Vasut
• [U-Boot] [PATCH 2/5] PXA: Add hardware init helper macros   Marek Vasut
• [U-Boot] [PATCH 3/5] PXA: Add PWM2 and PWM3 regs to pxa-regs.h   Marek Vasut
• [U-Boot] [PATCH 4/5] PXA: Add OneNAND booting support to start.S   Marek Vasut
• [U-Boot] [PATCH 5/5] PXA: PXA3xx NAND Driver   Marek Vasut
• [U-Boot] [PATCH] PXA: New MMC driver   Marek Vasut
• [U-Boot] [PATCH 1/5] Voipac PXA270 LCD Support   Marek Vasut
• [U-Boot] [PATCH 2/5] PXA: Add support for LMS285GF05 into pxafb   Marek Vasut
• [U-Boot] [PATCH 3/5] PXA: Voipac PXA270 Support   Marek Vasut
• [U-Boot] [PATCH 4/5] PXA: Toradex Colibri PXA270 support   Marek Vasut
• [U-Boot] [PATCH 5/5] PXA: ZipitZ2 support   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa next-mmc   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa next   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa next   Marek Vasut
• [U-Boot] [PATCH 3/5] PXA: Voipac PXA270 Support   Marek Vasut
• [U-Boot] Need Your Help   Marek Vasut
• [U-Boot] [PATCH 5/5] PXA: PXA3xx NAND Driver   Marek Vasut
• [U-Boot] concerning the EasyPC WMT Netbook Machine and your hand made modules (or your knowledge of both)   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa next   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa next   Marek Vasut
• [U-Boot] [PULL] U-Boot-pxa   Marek Vasut
• [U-Boot] Unable to save environment variable in NOR Flash   Marek Vasut
• [U-Boot] [PATCH v3] PXA: New MMC driver   Marek Vasut
• [U-Boot] FW: Need Your Help   Marek Vasut
• [U-Boot] [PATCH 1/2] cmd_ide: Convert to [read,write][b,w]   Marek Vasut
• [U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]   Marek Vasut
• [PATCH] ARM: Define __raw_readX and __raw_writeX   Marek Vasut
• [PATCH] ARM: Define __raw_readX and __raw_writeX   Marek Vasut
• [U-Boot] Patch adding reads/writes[bwl]   Marek Vasut
• [U-Boot] Patch adding reads/writes[bwl]   Marek Vasut
• [U-Boot] Patch adding reads/writes[bwl]   Marek Vasut
• [U-Boot] [PULL] U-Boot-pxa   Marek Vasut
• [U-Boot] [PATCH 1/7] ARM: Define __raw_readX and __raw_writeX   Marek Vasut
• [U-Boot] [PATCH 2/7] PXA: pxafb: Add ACX517AKN support   Marek Vasut
• [U-Boot] [PATCH 3/7] common: Enable serial for PXA250   Marek Vasut
• [U-Boot] [PATCH 4/7] PXA: Palm Tungsten|C Support   Marek Vasut
• [U-Boot] [PATCH 5/7] PXA: pxafb: Add support for Sharp LQ038J7DH53   Marek Vasut
• [U-Boot] [PATCH 6/7] PXA: Add initial Palm LifeDrive support   Marek Vasut
• [U-Boot] [PATCH 7/7] PXA: Vpac270 config fixes   Marek Vasut
• [U-Boot] [PULL] U-Boot-pxa   Marek Vasut
• [U-Boot] U-boot and AT91SAM9263-EK   Radovan Vápeník
• [U-Boot] U-boot and AT91SAM9263-EK   Radovan Vápeník
• [U-Boot] [PATCH] orion5x: edminiv2: add libata support   Prafulla Wadaskar
• [U-Boot] [PATCH 4/4] egiga: add support for orion5x   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Prafulla Wadaskar
• [U-Boot] [PATCH 3/4] egiga: remove references to kirkwood SoC   Prafulla Wadaskar
• [U-Boot] [PATCH 2/4] egiga: Remove functional dependency on kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Prafulla Wadaskar
• [U-Boot] [PATCH 3/4] egiga: remove references to kirkwood SoC   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_egiga: updates: fix DRAM mapping and typo   Prafulla Wadaskar
• [U-Boot] [PATCH 2/4] egiga: Remove functional dependency on kirkwood   Prafulla Wadaskar
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Prafulla Wadaskar
• [U-Boot] [PATCH V2 2/3] orion5x: add ide support for Marvell SATA   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Prafulla Wadaskar
• [U-Boot] [PATCH V2 2/3] orion5x: add ide support for Marvell SATA   Prafulla Wadaskar
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Prafulla Wadaskar
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/3] edmini: add IDE support   Prafulla Wadaskar
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   Prafulla Wadaskar
• [U-Boot] [PATCH V2 4/6] mv_egiga: only randomize MAC on kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V2 1/6] net: rename: kirkwood_egiga as mv_egiga   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/6] mv_egiga: bugfix: DMA issue fixed using volatile   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_egiga: bugfix: add DMA sequence points   Prafulla Wadaskar
• [U-Boot] [PATCH V2] kirkwood_egiga: bugfix: add DMA sequence points   Prafulla Wadaskar
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V3 3/5] mv_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION   Prafulla Wadaskar
• [U-Boot] [PATCH V3 5/5] edminiv2: add ethernet support   Prafulla Wadaskar
• [U-Boot] [PATCH V3 4/5] mv_egiga: add support for orion5x egiga controller   Prafulla Wadaskar
• [U-Boot] [PATCH V3 4/4] edminiv2: add cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V3 3/4] orion5x: add support for cmd_ide.c   Prafulla Wadaskar
• [U-Boot] [PATCH V3 2/4] drivers/block: add mv_sata_ide driver   Prafulla Wadaskar
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V4 0/4] Marvell GbE multiple SoC support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 2/4] ide: add mvsata_ide driver   Prafulla Wadaskar
• [U-Boot] [PATCH V5 3/4] cmd_ide: add support for orion5x   Prafulla Wadaskar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH 0/2] ARMV7: Add support for the Versatile Express Quad Cortex A9 platform   Matt Waddel
• [U-Boot] [PATCH 1/2] ARMV7: Versatile Express Coretile quad-core Cortex-A9 support   Matt Waddel
• [U-Boot] [PATCH 2/2] ARMV7: Fix baudrate change capabilities   Matt Waddel
• [U-Boot] Micrel Controller KSZ8841-16MBL   Ben Warren
• [U-Boot] [PATCH 1/4] ARM: Rename kirkwood_egiga driver to egiga   Ben Warren
• [U-Boot] [PATCH 3/5] PXA: Voipac PXA270 Support   Ben Warren
• [U-Boot] [PATCH] smc91xx_eeprom: Correct chip detection check.   Ben Warren
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Ben Warren
• [U-Boot] [PATCH V3 5/5] edminiv2: add ethernet support   Ben Warren
• [U-Boot] [PATCH v2] net: Add option to disable fiber on M88E1111 PHY for PPC4xx   Ben Warren
• [U-Boot] [PATCH] net: dm9000x: re-add casts to I/O pointers to fix gcc warnings   Ben Warren
• [U-Boot] [PATCH 14/35] Blackfin: bfin_mac: convert to portmux framework   Ben Warren
• [U-Boot] [PATCH 24/35] Blackfin: bf518f-ezbrd: handle different PHYs dynamically   Ben Warren
• [U-Boot] [PATCH 24/35] Blackfin: bf518f-ezbrd: handle different PHYs dynamically   Ben Warren
• [U-Boot] [PATCH 14/35] Blackfin: bfin_mac: convert to portmux framework   Ben Warren
• [U-Boot] net, tsec: add micrel ksz804 phy   Ben Warren
• [U-Boot] [PATCH V2] kirkwood_egiga: bugfix: add DMA sequence points   Ben Warren
• [U-Boot] [PATCH v5 06/18] SPEAr : Network driver support added   Ben Warren
• [U-Boot] [PATCH] kirkwood_egiga: updates: fix DRAM mapping and typo   Ben Warren
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Ben Warren
• [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood   Ben Warren
• [U-Boot] Pull request - net *updated*   Ben Warren
• [U-Boot] [PATCH V4 0/4] Marvell GbE multiple SoC support   Ben Warren
• [U-Boot] [PATCH] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Ben Warren
• [U-Boot] [PATCH v2] net, fec: fix "Warning: eth device name has a space!" for FEC devices   Ben Warren
• [U-Boot] [PATCH v3] net ppc: fix ethernet device names with spaces   Ben Warren
• [U-Boot] [PATCH] net, fec: Shorten device name as done for other drivers   Ben Warren
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Ben Warren
• [U-Boot] drivers/net/enc28j60.c - generalisation, how?   Ben Warren
• [U-Boot] [PATCH] net: rename "FSL UECx" net interfaces "UECx"   Ben Warren
• [U-Boot] [PATCH 1/3] miiphy: constify device name   Ben Warren
• [U-Boot] [PATCH] net: dm9000x: re-add casts to I/O pointers to fix gcc warnings   Thomas Weber
• [U-Boot] [PATCH v3] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Harald Welte
• [U-Boot] Can not erase first 2 sectors on flash   Chen Wen
• [U-Boot] Watchdog support for ppc4xx   Chen Wen
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Lei Wen
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Lei Wen
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Lei Wen
• [U-Boot] [PATCH 15/35] Blackfin: bfin_nand: convert to portmux framework   Scott Wood
• [U-Boot] handling of bad blocks in nand   Scott Wood
• [U-Boot] [PATCH 1/2] mtd: nand_plat: add simple GPIO framework DEV_READY option   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH 5/5] PXA: PXA3xx NAND Driver   Scott Wood
• [U-Boot] [PATCH 5/5] PXA: PXA3xx NAND Driver   Scott Wood
• [U-Boot] [PATCH v4] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Scott Wood
• [U-Boot] [PATCH] NAND: formatting cleanups from env.oob support   Scott Wood
• [U-Boot] [PATCH v4] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)   Scott Wood
• [U-Boot] [PULL] u-boot-pxa next   Scott Wood
• [U-Boot] [PULL] u-boot-pxa next   Scott Wood
• [U-Boot] [PATCH] common: add a grepenv command   Scott Wood
• [U-Boot] [PATCH 2/2 v2] 8xx, kup4: add FDT support   Scott Wood
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Scott Wood
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Scott Wood
• [U-Boot] [PATCH] NAND: add Samsung K9LBG08UXD identifier   Scott Wood
• [U-Boot] [RFC][PATCH 14/19] nand_fsl_nfc: get rid of local var   Scott Wood
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Eric Xu
• [U-Boot] 答复: [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Xu, Hong
• [U-Boot] [PATCH] AT91SAM9260/9XE: add support for MultiMedia Card Interface (MCI)   Xu, Hong
• [U-Boot] [PATCH-V2 1/3] at91: Defined main clock frequency on esd at91 boards   Xu, Hong
• [U-Boot] [PATCH-V2 3/3] at91: Enabeling USB host on meesc board   Xu, Hong
• [U-Boot] [PATCH-V2 2/3] at91: Update meesc board to new SoC access   Xu, Hong
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale   Ilya Yanok
• [U-Boot] [PATCH 2/2] MPC8308RDB: minimal support for devboard from Freescale   Ilya Yanok
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale   Ilya Yanok
• [U-Boot] U-Boot: U-Boot 2010.06 doesn't boot from NAND Flash on AMCC Sequoia   YURI ZHARIKOV
• [U-Boot] Problem when compiling Uboot 1.3.4 use arm-linux-gcc 3.3.2   Zheng Zhang
• [U-Boot] A bl command question about smdk2410 in u-boot-2010.06   Jianchun Zhou
• [U-Boot] [PATCH] mflash: use common cmd_usage function   Detlev Zundel
• [U-Boot] [PATCH] Rename getenv_r() into getenv_f()   Detlev Zundel
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Detlev Zundel
• [U-Boot] [PATCH] tools/env/fw_printenv: Make redundant env work on locked flashes also   Detlev Zundel
• [U-Boot] gcc optimizing option cause printf() and others crash.why?   Detlev Zundel
• [U-Boot] Business, Consumer and Healthcare Email lists   Marcel annals
• [U-Boot] [PATCH 0/3] Fix building various esd boards in u-boot-testing repo's hastable branch   matthias.fuchs at esd.eu
• [U-Boot] [PATCH 1/3] ppc4xx: Fix building of AR405 board   matthias.fuchs at esd.eu
• [U-Boot] [PATCH 2/3] ppc4xx: Fix building of CANBT board   matthias.fuchs at esd.eu
• [U-Boot] [PATCH 3/3] ppc4xx: Fix building of PMC440 board   matthias.fuchs at esd.eu
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   kalyan karnati
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   kalyan karnati
• [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client   kalyan karnati
• [U-Boot] [PATCH V2 0/2] ARMV7: Add support for Versatile Express CortexA9x4   matt.waddel at linaro.org
• [U-Boot] [PATCH V2 1/2] ARMV7: Versatile Express Coretile CortexA9x4 support   matt.waddel at linaro.org
• [U-Boot] [PATCH V2 2/2] ARMV7: Fixed baudrate setting in pl01x driver   matt.waddel at linaro.org
• [U-Boot] guys, can you see some init code for davinci's chipselect bit width driving DM9000A?   yaojin liu
• [U-Boot] guys, can you see some init code for davinci's chipselect bit width driving DM9000A?   yaojin liu
• [U-Boot] Problem when compiling Uboot 1.3.4 use arm-linux-gcc 3.3.2   yaojin liu
• [U-Boot] did anyone use flash_utils on dm355 platform?i cannot write flash!   yaojin liu
• [U-Boot] uboot auto restart on dm355,why?   yaojin liu
• [U-Boot] uboot auto restart on dm355,why?   yaojin liu
• [U-Boot] strange thing: u-boot's vsprintf overrun on DM355   yaojin liu
• [U-Boot] strange thing: u-boot's vsprintf overrun on DM355   yaojin liu
• [U-Boot] gcc optimizing option cause printf() and others crash.why?   yaojin liu
• [U-Boot] gcc optimizing option cause printf() and others crash.why?   yaojin liu
• [U-Boot] fw_printenv is not working   mateer
• [U-Boot] fw_printenv is not working   mateer
• [U-Boot] Confirm...   chenmary at netvigator.com
• [U-Boot] Allocating memory in u-boot application   prathika
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please Pull u-boot-ti master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] spi utility command support   shashikiran.bevenkatti at wipro.com
• [U-Boot] spi utility command support   shashikiran.bevenkatti at wipro.com
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   xiangfu
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   xiangfu
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   xiangfu
• [U-Boot] [PATCH] move the flash setup to "#ifndef CONFIG_SYS_NO_FLASH"   xiangfu
• [U-Boot] S3C2440 "usb start" and then "usb stop" cause nand operate failure.   wesley xie
• [U-Boot] [U-BOOT] operate on a udisk with fat32 fs, and 2048 block size will cause system to restart   wesley xie
• [U-Boot] [U-BOOT] operate on a udisk with fat32 fs, and 2048 block size will cause system to restart   wesley xie
• [U-Boot] [U-BOOT] operate on a udisk with fat32 fs, and 2048 block size will cause system to restart   wesley xie
• [U-Boot] [PATCH 8/8] powerpc/85xx: Add memory test feature for mpc85xx.   sun york-R58495
• [U-Boot] How can i add intterrupt for AT91SAM9260EK board   zhou yu
• [U-Boot] u-boot problem for M501 Board after u-boot-2009   mürsel yıldız
• [U-Boot] Hi!   Мария Сергеева

Last message date: Sat Jul 31 20:29:36 CEST 2010
Archived on: Sat Jul 31 20:44:30 CEST 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...