[U-Boot] Pull request - net *updated*

[Wolfgang Denk]

Dear Ben Warren,

In message <4C3C0B91.40205 at gmail.com> you wrote:
> 
> 
> Wolfgang,
> 
> The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
>    Wolfgang Denk (1):
>          Make sure that argv[] argument pointers are not modified.
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-net.git master
> 
> Albert Aribaud (7):
>        kirkwood_egiga: bugfix: add DMA sequence points
>        kirkwood_egiga: updates: fix DRAM mapping and typo
>        kirkwood_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION
>        net: rename: kirkwood_egiga as mvgbe
>        mvgbe: support SoCs other than kirkwood
>        mvgbe: add support for orion5x GbE controller
>        edminiv2: add ethernet support
> 
> Ben Warren (1):
>        Write MAC address automatically on MACB-based boards
> 
> Eric Bénard (2):
>        at91_emac: Write MAC address automatically
>        cpuat91: unbreak ethernet
> 
> Heiko Schocher (1):
>        tsec: add micrel ksz804 phy
> 
> Hoan Hoang (3):
>        AX88180: fix media typos
>        AX88180: add support for the Marvell 88E1118 phy
>        AX88180: make OUTW handle 32bit/16bit defines too
> 
> Juergen Kilb (1):
>        smc91xx_eeprom: Correct chip detection check.
> 
> Mike Frysinger (7):
>        net: dm9000x: re-add casts to I/O pointers to fix gcc warnings
>        AX88180: add missing init prototype
>        AX88180: improve phy searching
>        AX88180: switch to common mii.h header
>        net: warn about spaces in device names
>        uli526x: drop newlines from device name
>        AX88180: use standard I/O accessors
> 
> Stefan Roese (1):
>        net: Add option to disable fiber on M88E1111 PHY for PPC4xx
> 
> Timur Tabi (1):
>        tsec: fix the return value for tsec_eth_init()
> 
> Vipin KUMAR (1):
>        SPEAr : Network driver support added
> 
>   arch/arm/cpu/arm926ejs/kirkwood/cpu.c           |    4 +-
>   arch/arm/cpu/arm926ejs/orion5x/cpu.c            |    8 +
>   arch/arm/include/asm/arch-kirkwood/kirkwood.h   |    5 +
>   arch/arm/include/asm/arch-orion5x/orion5x.h     |    4 +
>   board/LaCie/edminiv2/edminiv2.c                 |   36 ++
>   board/LaCie/edminiv2/edminiv2.h                 |   41 ++
>   board/afeb9260/afeb9260.c                       |    7 -
>   board/atmel/at91cap9adk/at91cap9adk.c           |    7 -
>   board/atmel/at91sam9260ek/at91sam9260ek.c       |    7 -
>   board/atmel/at91sam9263ek/at91sam9263ek.c       |    7 -
>   board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |    7 -
>   board/calao/sbc35_a9g20/sbc35_a9g20.c           |    7 -
>   board/eukrea/cpu9260/cpu9260.c                  |    7 -
>   board/ronetix/pm9263/pm9263.c                   |    7 -
>   doc/README.designware_eth                       |   25 +
>   drivers/net/4xx_enet.c                          |    5 +
>   drivers/net/Makefile                            |    3 +-
>   drivers/net/at91_emac.c                         |   60 ++-
>   drivers/net/ax88180.c                           |  137 ++++---
>   drivers/net/ax88180.h                           |  104 ++---
>   drivers/net/designware.c                        |  531 +++++++++++++++++++++++
>   drivers/net/designware.h                        |  264 +++++++++++
>   drivers/net/dm9000x.c                           |   12 +-
>   drivers/net/kirkwood_egiga.h                    |  505 ---------------------
>   drivers/net/macb.c                              |   23 +-
>   drivers/net/{kirkwood_egiga.c =>  mvgbe.c}       |  377 +++++++++--------
>   drivers/net/mvgbe.h                             |  505 +++++++++++++++++++++
>   drivers/net/tsec.c                              |   37 ++-
>   drivers/net/uli526x.c                           |    2 +-
>   examples/standalone/smc911x_eeprom.c            |    2 +-
>   include/configs/cpuat91.h                       |    9 +-
>   include/configs/edminiv2.h                      |   19 +-
>   include/configs/guruplug.h                      |    4 +-
>   include/configs/km_arm.h                        |    4 +-
>   include/configs/mv88f6281gtw_ge.h               |    4 +-
>   include/configs/openrd_base.h                   |    4 +-
>   include/configs/rd6281a.h                       |    4 +-
>   include/configs/sheevaplug.h                    |    4 +-
>   include/netdev.h                                |    4 +-
>   net/eth.c                                       |    3 +
>   40 files changed, 1898 insertions(+), 907 deletions(-)
>   create mode 100644 board/LaCie/edminiv2/edminiv2.h
>   create mode 100644 doc/README.designware_eth
>   create mode 100644 drivers/net/designware.c
>   create mode 100644 drivers/net/designware.h
>   delete mode 100644 drivers/net/kirkwood_egiga.h
>   rename drivers/net/{kirkwood_egiga.c =>  mvgbe.c} (60%)
>   create mode 100644 drivers/net/mvgbe.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Don't try to outweird me, three-eyes. I get stranger things than you
free with my breakfast cereal."
           - Zaphod Beeblebrox in  "Hitchhiker's Guide to the Galaxy"