[U-Boot] Please pull u-boot-ppc4xx/master

[Wolfgang Denk]

Dear Stefan Roese,

In message <201007011036.36157.sr at denx.de> you wrote:
> Hi Wolfgang,
> 
> The following changes since commit 39ddd10b046fb791f47281ffb2100be01909ad72:
> 
>   Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-06-30 
> 10:10:32 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Stefan Roese (7):
>       ppc4xx: Enable booting with Option E on 460EX/EXr/GT
>       ppc4xx: Enable PCIe support without PCI support on PPC440/460
>       ppc4xx: Enable overwriting of default scan window for IBM DDR2 controller
>       ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boards
>       ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as well
>       ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460
>       ppc4xx: Add T3COPR board support (PPC460GT based)
> 
>  MAINTAINERS                                      |    1 +
>  MAKEALL                                          |    1 +
>  arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c           |   52 ++-
>  arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c |   17 +-
>  arch/powerpc/cpu/ppc4xx/4xx_pci.c                |   12 +-
>  arch/powerpc/cpu/ppc4xx/cpu_init.c               |   49 ++-
>  arch/powerpc/cpu/ppc4xx/start.S                  |   21 +-
>  arch/powerpc/include/asm/ppc4xx-sdram.h          |    9 +-
>  board/t3corp/Makefile                            |   53 +++
>  board/t3corp/chip_config.c                       |   59 +++
>  board/t3corp/config.mk                           |   39 ++
>  board/t3corp/init.S                              |   99 ++++
>  board/t3corp/t3corp.c                            |  193 ++++++++
>  boards.cfg                                       |    1 +
>  include/configs/t3corp.h                         |  544 ++++++++++++++++++++++
>  include/ppc440.h                                 |    7 +
>  16 files changed, 1104 insertions(+), 53 deletions(-)
>  create mode 100644 board/t3corp/Makefile
>  create mode 100644 board/t3corp/chip_config.c
>  create mode 100644 board/t3corp/config.mk
>  create mode 100644 board/t3corp/init.S
>  create mode 100644 board/t3corp/t3corp.c
>  create mode 100644 include/configs/t3corp.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
After a heated argument on some trivial matter Nancy [Astor]  .  .  .
shouted,  ``If  I were your wife I would put poison in your coffee!''
Whereupon Winston Churchill with equal heat and  sincerity  answered,
``And if I were your husband I would drink it.''