[U-Boot] [PATCH] net: dm9000x: re-add casts to I/O pointers to fix gcc warnings

[Mike Frysinger]

The DM9000 in/out helper functions were casting the register address when
it was accessing things directly (pre commit a45dde2293c816138e53c).  But
when it was changed to using the in/out helpers, those casts were dropped
because those functions don't take pointers.  Even more recently, those
functions were then changed to use the read/write helpers, but the casts
were not re-added.  This is necessary because the read/write helpers do
take pointers.  Otherwise we get a lot of warnings like:
dm9000x.c: In function 'dm9000_inblk_8bit':
dm9000x.c:172: warning: passing argument 1 of 'readb'
	makes pointer from integer without a cast

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 drivers/net/dm9000x.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 137e41f..709f67a 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -117,12 +117,12 @@ static void DM9000_iow(int reg, u8 value);
 
 /* DM9000 network board routine ---------------------------- */
 
-#define DM9000_outb(d,r) writeb(d, r)
-#define DM9000_outw(d,r) writew(d, r)
-#define DM9000_outl(d,r) writel(d, r)
-#define DM9000_inb(r) readb(r)
-#define DM9000_inw(r) readw(r)
-#define DM9000_inl(r) readl(r)
+#define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r))
+#define DM9000_outw(d,r) writew(d, (volatile u16 *)(r))
+#define DM9000_outl(d,r) writel(d, (volatile u32 *)(r))
+#define DM9000_inb(r) readb((volatile u8 *)(r))
+#define DM9000_inw(r) readw((volatile u16 *)(r))
+#define DM9000_inl(r) readl((volatile u32 *)(r))
 
 #ifdef CONFIG_DM9000_DEBUG
 static void
-- 
1.7.1.1