[U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.

[Wolfgang Denk]

Dear Bradley Hughes,

In message <AANLkTimM0NENrBZo9seY6OlLNmU_fz3tv9LWZeG8ykRN at mail.gmail.com> you wrote:
> Change the configuration for the STx GP3-SSA board in order to support
>  FDT parsing and passing.
> Also changed default u-boot environment for convenience.

One more thing:

...
> +        "consdev=ttyPSC0\0"                                             \
...

This is almost certainly wrong. There is no PSC on a 85xx; on my
board, "consdev=ttyS1" is needed.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Be wiser than other people if you can, but do not tell them so.
                                       -- Philip Earl of Chesterfield