[U-Boot] [PATCH] powerpc/85xx: Move INIT_RAM_ADDR physical address to 36-bit space

Kumar Gala galak at kernel.crashing.org
Wed Jul 14 17:14:54 CEST 2010


From: york <yorksun at freescale.com>

If 36-bit physical address is used, move the INIT_RAM_ADDR to higher
address. This frees the low 4GB address space for better use.

Signed-off-by: York Sun <yorksun at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/start.S |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index b3cb56a..aaf7838 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -330,8 +330,15 @@ _start_e500:
 	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
 	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
 
+#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+	li      r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
+	mtspr	MAS7,r10
+#else
 	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
 	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
 
 	mtspr   MAS0,r6
 	mtspr   MAS1,r7
-- 
1.6.0.6



More information about the U-Boot mailing list