[U-Boot] [PATCH 00/28] Support for SPEAr13xx boards added
Vipin KUMAR
vipin.kumar at st.com
Wed Jul 14 07:09:36 CEST 2010
The following patch-set adds the support for the following
1. SPEAr13xx boards (SPEAr1300 and SPEAr1310)
2. Addition of High speed support for USB device for usbtty framework
3. Miscellneous fixes in Network and FSMC (NAND controller) drivers
Please consider the patch-set for inclusion in the mainline
Please make sure that the following patches can be applied only after the
following Network driver patch which Ben has already accepted in his tree
5b1b1883ffcb75de71a0b4e66b279c88ae1e15fc : SPEAr : Network driver support added
Regards
Vipin
Armando Visconti (1):
SPEAr1300: Workaround the UHC problem (issue #101435)
Vipin KUMAR (26):
change_bit routine defined
SPEAr : SMI erase and write timeouts increased
SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET
SPEAr : Reducing the max RAM size to 128MB
SPEAr : Basic arch related support added for SPEAr SoCs
SPEAr : Network support configured for spear SoCs
SPEAr : macb driver support added for spear310 and spear320
SPEAr : FSMC driver support added
SPEAr : Configuring FSMC driver for NAND interface
SPEAr : i2c driver moved completely into drivers/i2c
SPEAr : smi driver moved completely into drivers/mtd
SPEAr : USB Device Controller driver support added
SPEAr : Supporting various configurations for spear3xx and spear6xx
boards
SPEAr : Basic spear1300 architecture support added
SPEAr : spear1300 SoC support added
SPEAr : Removing extraneous code
SPEAr : USB device controller bugfixes
SPEAr : Network driver fixes.
SPEAr : Changing the default environment variable bootargs
Enable high speed support for usb device framework and usbtty
SPEAr : High speed support for designware peripheral
SPEAr : Enable usb device high speed support
SPEAr : Network support configuration
SPEAr : Enabling GPT clock explicitly
SPEAr : smi_init moved to board_init
SPEAr : Ethernet issue workaround is not needed when uboot is acting
as flashing
Vipin Kumar (1):
SPEAr1310 : spear1310 support added
MAINTAINERS | 2 +
MAKEALL | 2 +
Makefile | 41 ++-
arch/arm/cpu/arm926ejs/spear/Makefile | 3 +-
arch/arm/cpu/arm926ejs/spear/cpu.c | 84 ++++
arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 +++
arch/arm/cpu/arm_cortexa8/spear13xx/ca9_ltimer.c | 136 +++++++
arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 ++++++
arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 133 +++++++
.../arm/cpu/arm_cortexa8/spear13xx/reset.c | 40 +-
.../arm/include/asm/arch-spear/clk.h | 26 +-
arch/arm/include/asm/arch-spear/hardware.h | 16 +-
arch/arm/include/asm/arch-spear/spr_misc.h | 7 +
.../arm/include/asm/arch-spear13xx/ca9_ltimer.h | 36 +-
.../arm/include/asm/arch-spear13xx/hardware.h | 35 +-
arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++++++
.../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +-
arch/arm/include/asm/bitops.h | 11 +-
board/spear/common/Makefile | 12 +-
.../spear/common/spr13xx_lowlevel_init.S | 35 +-
.../spear/common/spr13xx_misc.c | 48 +--
board/spear/common/spr_misc.c | 32 ++-
board/spear/spear1300/Makefile | 51 +++
board/spear/spear1300/config.mk | 28 ++
board/spear/spear1300/spear1300.c | 70 ++++
board/spear/spear1310/Makefile | 51 +++
board/spear/spear1310/config.mk | 28 ++
board/spear/spear1310/spear1310.c | 70 ++++
board/spear/spear300/config.mk | 11 -
board/spear/spear300/spear300.c | 18 +-
board/spear/spear310/config.mk | 11 -
board/spear/spear310/spear310.c | 35 ++-
board/spear/spear320/config.mk | 11 -
board/spear/spear320/spear320.c | 23 +-
board/spear/spear600/config.mk | 11 -
board/spear/spear600/spear600.c | 18 +-
doc/README.spear | 51 ++-
drivers/i2c/Makefile | 2 +-
drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +-
.../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
drivers/mtd/Makefile | 2 +-
drivers/mtd/nand/Makefile | 2 +-
drivers/mtd/nand/fsmc_nand.c | 401 ++++++++++++++++++++
drivers/mtd/nand/spr_nand.c | 124 ------
drivers/mtd/{spr_smi.c => st_smi.c} | 61 ++--
drivers/net/designware.c | 8 +-
drivers/net/designware.h | 2 +-
drivers/serial/usbtty.h | 4 +-
drivers/usb/gadget/Makefile | 2 +-
drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 123 ++++---
include/configs/spear-common.h | 50 ++-
include/configs/spear13xx_evb.h | 225 +++++++++++
include/configs/{spear3xx.h => spear3xx_evb.h} | 31 ++
include/configs/{spear6xx.h => spear6xx_evb.h} | 12 +
include/linux/mtd/fsmc_nand.h | 108 ++++++
.../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
include/usb/{spr_udc.h => designware_udc.h} | 9 +-
57 files changed, 2424 insertions(+), 460 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile
create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/ca9_ltimer.c
create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S
create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c
copy include/configs/spear6xx.h => arch/arm/cpu/arm_cortexa8/spear13xx/reset.c (55%)
mode change 100644 => 100755
copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear/clk.h (64%)
copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/ca9_ltimer.h (55%)
copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/hardware.h (54%)
create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h
copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%)
copy include/configs/spear6xx.h => board/spear/common/spr13xx_lowlevel_init.S (56%)
rename arch/arm/include/asm/arch-spear/spr_nand.h => board/spear/common/spr13xx_misc.c (52%)
create mode 100644 board/spear/spear1300/Makefile
create mode 100644 board/spear/spear1300/config.mk
create mode 100644 board/spear/spear1300/spear1300.c
create mode 100644 board/spear/spear1310/Makefile
create mode 100644 board/spear/spear1310/config.mk
create mode 100644 board/spear/spear1310/spear1310.c
rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%)
rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
create mode 100644 drivers/mtd/nand/fsmc_nand.c
delete mode 100644 drivers/mtd/nand/spr_nand.c
rename drivers/mtd/{spr_smi.c => st_smi.c} (94%)
rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (90%)
create mode 100644 include/configs/spear13xx_evb.h
rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%)
rename include/configs/{spear6xx.h => spear6xx_evb.h} (84%)
create mode 100644 include/linux/mtd/fsmc_nand.h
rename arch/arm/include/asm/arch-spear/spr_smi.h => include/linux/mtd/st_smi.h (95%)
rename include/usb/{spr_udc.h => designware_udc.h} (97%)
More information about the U-Boot
mailing list