[U-Boot] fw_printenv is not working

mateer bhat.mateen at gmail.com
Thu Jul 29 17:21:22 CEST 2010


Hi,
when i run fw_printenv , its not working..It shows:-   fw_printenv: line 1:
syntax error: "(" unexpected  error... Let me tell you what i did...
1) i copy the u-boot source code from my colleague and copy in my hard disk.
2) After then i set the environment through commnads. the commands which i
run are
	# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean
	# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3_evm_config
	# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm
3) After then i go to /tools/env, where i configure the fw_env.config and
then run make command.
4) After ruuning the command i got crc32.c and fw_printenv.
5)i copied the fw_printenv into the SD-Card and insert the card into the
OMAP3EVM board.
6) after then when i use the command ./fw_printenv it throws the error
fw_printenv: line 1: syntax error: "(" unexpected  error..
         Can u please help me what i have to do... I think i am doing
something wrong...

-- 
View this message in context: http://old.nabble.com/fw_printenv-is-not-working-tp29297562p29297562.html
Sent from the Uboot - Users mailing list archive at Nabble.com.



More information about the U-Boot mailing list