[U-Boot] [PATCH] orion5x: edminiv2: add libata support

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Tor Krill
> Sent: Thursday, July 01, 2010 1:07 PM
> To: Albert Aribaud
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH] orion5x: edminiv2: add libata support
> 
> On Wed, 2010-06-30 at 23:30 +0200, Albert Aribaud wrote:
> > Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
> > ---
> > This patch:
> > - adds support in libata for the orion5x MVSATAHC controller;
> > - enables orion5x MVSTAHC port 1 on the edmini board;
> > - adds IDE and EXT2 commands to the edminiv2 command set.
> 
> Just a heads up. I posted a patch with a sata-driver for kirkwood a
> while back. (We use this with our board and it seems to work fine)
> 
> http://lists.denx.de/pipermail/u-boot/2010-June/073147.html

I was just trying to test it, May I know relevant board configs?

> 
> Which might have some similarities to the sata controller on orion.

like egiga, we can think of having single sata driver for this.

Regards..
Prafulla . .

> 
> /Tor
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>