[U-Boot] [PATCH 19/35] Blackfin: bfin_spi: convert to portmux framework
Mike Frysinger
vapier at gentoo.org
Mon Jul 5 11:30:24 CEST 2010
Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
drivers/spi/bfin_spi.c | 209 ++++++++++++------------------------------------
1 files changed, 50 insertions(+), 159 deletions(-)
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index f28d42b..4e008a7 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -13,6 +13,7 @@
#include <spi.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/spi.h>
struct bfin_spi_slave {
@@ -81,6 +82,42 @@ void spi_init()
{
}
+#ifdef SPI_CTL
+# define SPI0_CTL SPI_CTL
+#endif
+
+#define SPI_PINS(n) \
+ [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 }
+static unsigned short pins[][5] = {
+#ifdef SPI0_CTL
+ SPI_PINS(0),
+#endif
+#ifdef SPI1_CTL
+ SPI_PINS(1),
+#endif
+#ifdef SPI2_CTL
+ SPI_PINS(2),
+#endif
+};
+
+#define SPI_CS_PINS(n) \
+ [n] = { \
+ P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \
+ P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \
+ P_SPI##n##_SSEL7, \
+ }
+static const unsigned short cs_pins[][7] = {
+#ifdef SPI0_CTL
+ SPI_CS_PINS(0),
+#endif
+#ifdef SPI1_CTL
+ SPI_CS_PINS(1),
+#endif
+#ifdef SPI2_CTL
+ SPI_CS_PINS(2),
+#endif
+};
+
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
@@ -92,11 +129,14 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (!spi_cs_is_valid(bus, cs))
return NULL;
+ if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) {
+ debug("%s: invalid bus %u\n", __func__, bus);
+ return NULL;
+ }
switch (bus) {
-#ifdef SPI_CTL
-# define SPI0_CTL SPI_CTL
-#endif
+#ifdef SPI0_CTL
case 0: mmr_base = SPI0_CTL; break;
+#endif
#ifdef SPI1_CTL
case 1: mmr_base = SPI1_CTL; break;
#endif
@@ -142,168 +182,15 @@ void spi_free_slave(struct spi_slave *slave)
free(bss);
}
-static void spi_portmux(struct spi_slave *slave)
-{
-#if defined(__ADSPBF51x__)
-#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func)
- u16 f_mux = bfin_read_PORTF_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- u16 g_mux = bfin_read_PORTG_MUX();
- u16 g_fer = bfin_read_PORTG_FER();
- u16 h_mux = bfin_read_PORTH_MUX();
- u16 h_fer = bfin_read_PORTH_FER();
- switch (slave->bus) {
- case 0:
- /* set SCK/MISO/MOSI */
- SET_MUX(g, 7, 1);
- g_fer |= PG12 | PG13 | PG14;
- switch (slave->cs) {
- case 1: SET_MUX(f, 2, 1); f_fer |= PF7; break;
- case 2: /* see G above */ g_fer |= PG15; break;
- case 3: SET_MUX(h, 1, 3); f_fer |= PH4; break;
- case 4: /* no muxing */ h_fer |= PH8; break;
- case 5: SET_MUX(g, 1, 3); h_fer |= PG3; break;
- case 6: /* no muxing */ break;
- case 7: /* no muxing */ break;
- }
- case 1:
- /* set SCK/MISO/MOSI */
- SET_MUX(h, 0, 2);
- h_fer |= PH1 | PH2 | PH3;
- switch (slave->cs) {
- case 1: SET_MUX(h, 2, 3); h_fer |= PH6; break;
- case 2: SET_MUX(f, 0, 3); f_fer |= PF0; break;
- case 3: SET_MUX(g, 0, 3); g_fer |= PG0; break;
- case 4: SET_MUX(f, 3, 3); f_fer |= PF8; break;
- case 5: SET_MUX(g, 6, 3); h_fer |= PG11; break;
- case 6: /* no muxing */ break;
- case 7: /* no muxing */ break;
- }
- }
- bfin_write_PORTF_MUX(f_mux);
- bfin_write_PORTF_FER(f_fer);
- bfin_write_PORTG_MUX(g_mux);
- bfin_write_PORTG_FER(g_fer);
- bfin_write_PORTH_MUX(h_mux);
- bfin_write_PORTH_FER(h_fer);
-#elif defined(__ADSPBF52x__)
-#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func)
- u16 f_mux = bfin_read_PORTF_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- u16 g_mux = bfin_read_PORTG_MUX();
- u16 g_fer = bfin_read_PORTG_FER();
- u16 h_mux = bfin_read_PORTH_MUX();
- u16 h_fer = bfin_read_PORTH_FER();
- /* set SCK/MISO/MOSI */
- SET_MUX(g, 0, 3);
- g_fer |= PG2 | PG3 | PG4;
- switch (slave->cs) {
- case 1: /* see G above */ g_fer |= PG1; break;
- case 2: SET_MUX(f, 4, 3); f_fer |= PF12; break;
- case 3: SET_MUX(f, 4, 3); f_fer |= PF13; break;
- case 4: SET_MUX(h, 1, 1); h_fer |= PH8; break;
- case 5: SET_MUX(h, 2, 1); h_fer |= PH9; break;
- case 6: SET_MUX(f, 1, 3); f_fer |= PF9; break;
- case 7: SET_MUX(f, 2, 3); f_fer |= PF10; break;
- }
- bfin_write_PORTF_MUX(f_mux);
- bfin_write_PORTF_FER(f_fer);
- bfin_write_PORTG_MUX(g_mux);
- bfin_write_PORTG_FER(g_fer);
- bfin_write_PORTH_MUX(h_mux);
- bfin_write_PORTH_FER(h_fer);
-#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
- u16 mux = bfin_read_PORT_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- /* set SCK/MISO/MOSI */
- f_fer |= PF11 | PF12 | PF13;
- switch (slave->cs) {
- case 1: f_fer |= PF10; break;
- case 2: mux |= PJSE; break;
- case 3: mux |= PJSE; break;
- case 4: mux |= PFS4E; f_fer |= PF6; break;
- case 5: mux |= PFS5E; f_fer |= PF5; break;
- case 6: mux |= PFS6E; f_fer |= PF4; break;
- case 7: mux |= PJCE_SPI; break;
- }
- bfin_write_PORT_MUX(mux);
- bfin_write_PORTF_FER(f_fer);
-#elif defined(__ADSPBF538__) || defined(__ADSPBF539__)
- u16 fer, pins;
- if (slave->bus == 1)
- pins = PD0 | PD1 | PD2 | (slave->cs == 1 ? PD4 : 0);
- else if (slave->bus == 2)
- pins = PD5 | PD6 | PD7 | (slave->cs == 1 ? PD9 : 0);
- else
- pins = 0;
- if (pins) {
- fer = bfin_read_PORTDIO_FER();
- fer &= ~pins;
- bfin_write_PORTDIO_FER(fer);
- }
-#elif defined(__ADSPBF54x__)
-#define DO_MUX(port, pin) \
- mux = ((mux & ~PORT_x_MUX_##pin##_MASK) | PORT_x_MUX_##pin##_FUNC_1); \
- fer |= P##port##pin;
- u32 mux;
- u16 fer;
- switch (slave->bus) {
- case 0:
- mux = bfin_read_PORTE_MUX();
- fer = bfin_read_PORTE_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(E, 0);
- DO_MUX(E, 1);
- DO_MUX(E, 2);
- switch (slave->cs) {
- case 1: DO_MUX(E, 4); break;
- case 2: DO_MUX(E, 5); break;
- case 3: DO_MUX(E, 6); break;
- }
- bfin_write_PORTE_MUX(mux);
- bfin_write_PORTE_FER(fer);
- break;
- case 1:
- mux = bfin_read_PORTG_MUX();
- fer = bfin_read_PORTG_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(G, 8);
- DO_MUX(G, 9);
- DO_MUX(G, 10);
- switch (slave->cs) {
- case 1: DO_MUX(G, 5); break;
- case 2: DO_MUX(G, 6); break;
- case 3: DO_MUX(G, 7); break;
- }
- bfin_write_PORTG_MUX(mux);
- bfin_write_PORTG_FER(fer);
- break;
- case 2:
- mux = bfin_read_PORTB_MUX();
- fer = bfin_read_PORTB_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(B, 12);
- DO_MUX(B, 13);
- DO_MUX(B, 14);
- switch (slave->cs) {
- case 1: DO_MUX(B, 9); break;
- case 2: DO_MUX(B, 10); break;
- case 3: DO_MUX(B, 11); break;
- }
- bfin_write_PORTB_MUX(mux);
- bfin_write_PORTB_FER(fer);
- break;
- }
-#endif
-}
-
int spi_claim_bus(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
- spi_portmux(slave);
+ pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1];
+ peripheral_request_list(pins[slave->bus], "bfin-spi");
+
write_SPI_CTL(bss, bss->ctl);
write_SPI_BAUD(bss, bss->baud);
SSYNC();
@@ -314,7 +201,11 @@ int spi_claim_bus(struct spi_slave *slave)
void spi_release_bus(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+ peripheral_free_list(pins[slave->bus]);
+
write_SPI_CTL(bss, 0);
SSYNC();
}
--
1.7.1.1
More information about the U-Boot
mailing list