[U-Boot] U-boot and AT91SAM9263-EK

[Radovan Vápeník]

Hello Alexander,
i made a mistake in configuration (i did'n run mkconfig), uBoot 2010-06 works correctly. Sorry for the confusion.

Best regards
Radiovan Vapenik



> ------------ Původní zpráva ------------
> Od: Alexander Stein <alexander.stein at systec-electronic.com>
> Předmět: Re: [U-Boot] U-boot and AT91SAM9263-EK
> Datum: 14.7.2010 17:57:41
> ----------------------------------------
> Hello,
> 
> Am Mittwoch, 14. Juli 2010, 17:05:47 schrieb Radovan Vápeník:
> > i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem
> > with access and save environment variables to NAND Flash. When I set any
> > environment  variable and save it to Nand (saveenv), uBoot shows me
> > "Saving Environment to NAND..." and after it shows the command prompt. The
> > saved variable is not set after reset. The last version, where saving
> > works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH
> > is set in config.h, so variables should be saved to NandFlash. What has
> > been changed in the new uBoot / what i am doing wrong?
> 
> Last time I build u-boot for 9263-ek was also 2009.11. You may want to git 
> bisect into this problem to find the commit where the problem starts. But 
> don't forget to distclean before.
> 
> Best regards,
> Alexander
> 
> 
>