[U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.
Aldo Cedillo
aldo.cedillo at ti.com
Fri Jul 16 08:30:06 CEST 2010
From: Aldo Brett Cedillo Martinez <aldo.cedillo at ti.com>
This patch set gives basic functionality to Omap3630 Zoom3 board. And
unifies serial_devices for zoom2 and zoom3 since both use the same
struct.
Thanks Wolfgang for your comments, the modifications done were:
- Added entry to MAINTAINERS in proper order.
- Macro for UART1_RX pin.
- Left include for status led unconditional.
- Unindented preprocessor statements.
- Made CONFIG_SYS_HZ a constant with value 1000.
- Zoom2 and Zoom3 devices now use the same serial device.
Aldo Brett Cedillo Martinez (2):
[U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.
[U-BOOT] Unify serial_device for zoom2 and zoom3.
MAINTAINERS | 4 +
MAKEALL | 1 +
board/logicpd/zoom2/zoom2_serial.h | 2 +-
board/logicpd/zoom3/Makefile | 54 +++++++
board/logicpd/zoom3/config.mk | 33 +++++
board/logicpd/zoom3/debug_board.c | 68 +++++++++
board/logicpd/zoom3/led.c | 133 +++++++++++++++++
board/logicpd/zoom3/zoom3.c | 199 ++++++++++++++++++++++++++
board/logicpd/zoom3/zoom3.h | 164 +++++++++++++++++++++
board/logicpd/zoom3/zoom3_serial.c | 132 +++++++++++++++++
board/logicpd/zoom3/zoom3_serial.h | 76 ++++++++++
boards.cfg | 1 +
common/serial.c | 2 +
include/configs/omap3_zoom2.h | 2 +-
include/configs/omap3_zoom3.h | 274 ++++++++++++++++++++++++++++++++++++
include/serial.h | 11 +-
16 files changed, 1148 insertions(+), 8 deletions(-)
create mode 100644 board/logicpd/zoom3/Makefile
create mode 100644 board/logicpd/zoom3/config.mk
create mode 100644 board/logicpd/zoom3/debug_board.c
create mode 100644 board/logicpd/zoom3/led.c
create mode 100644 board/logicpd/zoom3/zoom3.c
create mode 100644 board/logicpd/zoom3/zoom3.h
create mode 100644 board/logicpd/zoom3/zoom3_serial.c
create mode 100644 board/logicpd/zoom3/zoom3_serial.h
create mode 100644 include/configs/omap3_zoom3.h
More information about the U-Boot
mailing list