[U-Boot] How can i add intterrupt for AT91SAM9260EK board

[Alexander Stein]

Hello,

Am Donnerstag, 29. Juli 2010, 08:25:53 schrieb Reinhard Meyer:
> You have add interrupt handling (write source) to AT91 in general and
> provide a patch for that.
> 
> But first you have to define why you need interrupts (in the u-boot
> phase) in the first place.

One reason would be to workaround errata 44.3.5.1 (RSTC: Reset During SDRAM 
Accesses) on the AT91SAM9G20 which traps the reset interrupt to shutdown the 
SDRAM controller properly -.-

Best regards,
Alexander