[U-Boot] [PATCH v2] nios2: remove EP1C20, EP1S10, EP1S40 boards

Scott McNutt smcnutt at psyent.com
Mon Jul 12 17:59:34 CEST 2010


Applied to:

    git://git.denx.de/u-boot-nios.git next

Thanks,
--Scott

Thomas Chou wrote:
> The example configuration files of nios2-generic board can generated
> binary to run on the EP1C20, EP1S10, and EP1S40 boards. So the three
> boards can be removed.
> 
> With nios2-generic approach, the fpga parameter header file can
> be generated from hardware designs using tools. Porting u-boot for
> nios2 boards is simplified. Vendors can supply their fpga parameter
> file or patches to add a new nios2-generic board instance. There is
> no need to include other boards support for nios2 in the u-boot
> mainline.
> 
> Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
> ---
> Hi Scott, please rebase your next branch to Wolfgang's next, 06/14.
> 
> v2: rebased to Makefile simplify
> 
>  MAINTAINERS                   |    3 -
>  MAKEALL                       |    3 -
>  board/altera/ep1c20/Makefile  |   55 -----------
>  board/altera/ep1c20/config.mk |   31 ------
>  board/altera/ep1c20/ep1c20.c  |   52 ----------
>  board/altera/ep1s10/Makefile  |   55 -----------
>  board/altera/ep1s10/config.mk |   31 ------
>  board/altera/ep1s10/ep1s10.c  |   52 ----------
>  board/altera/ep1s40/Makefile  |   55 -----------
>  board/altera/ep1s40/config.mk |   31 ------
>  board/altera/ep1s40/ep1s40.c  |   47 ---------
>  boards.cfg                    |    3 -
>  include/configs/EP1C20.h      |  214 -----------------------------------------
>  include/configs/EP1S10.h      |  207 ---------------------------------------
>  include/configs/EP1S40.h      |  207 ---------------------------------------
>  15 files changed, 0 insertions(+), 1046 deletions(-)
>  delete mode 100644 board/altera/ep1c20/Makefile
>  delete mode 100644 board/altera/ep1c20/config.mk
>  delete mode 100644 board/altera/ep1c20/ep1c20.c
>  delete mode 100644 board/altera/ep1s10/Makefile
>  delete mode 100644 board/altera/ep1s10/config.mk
>  delete mode 100644 board/altera/ep1s10/ep1s10.c
>  delete mode 100644 board/altera/ep1s40/Makefile
>  delete mode 100644 board/altera/ep1s40/config.mk
>  delete mode 100644 board/altera/ep1s40/ep1s40.c
>  delete mode 100644 include/configs/EP1C20.h
>  delete mode 100644 include/configs/EP1S10.h
>  delete mode 100644 include/configs/EP1S40.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7a13d28..700dd8c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -852,9 +852,6 @@ Scott McNutt <smcnutt at psyent.com>
>  
>  	PCI5441		Nios-II
>  	PK1C20		Nios-II
> -	EP1C20		Nios-II
> -	EP1S10		Nios-II
> -	EP1S40		Nios-II
>  	nios2-generic	Nios-II
>  
>  #########################################################################
> diff --git a/MAKEALL b/MAKEALL
> index 2527352..56db729 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -815,9 +815,6 @@ LIST_x86="		\
>  #########################################################################
>  
>  LIST_nios2="		\
> -	EP1C20		\
> -	EP1S10		\
> -	EP1S40		\
>  	PCI5441		\
>  	PK1C20		\
>  	nios2-generic	\
> diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
> deleted file mode 100644
> index acad2aa..0000000
> --- a/board/altera/ep1c20/Makefile
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -#
> -# (C) Copyright 2001-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -ifneq ($(OBJTREE),$(SRCTREE))
> -$(shell mkdir -p $(obj)../common)
> -endif
> -
> -LIB	= $(obj)lib$(BOARD).a
> -
> -COMOBJS := ../common/AMDLV065D.o ../common/epled.o
> -
> -COBJS	:= $(BOARD).o $(COMOBJS)
> -
> -SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS	:= $(addprefix $(obj),$(COBJS))
> -SOBJS	:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB):	$(obj).depend $(OBJS)
> -	$(AR) $(ARFLAGS) $@ $(OBJS)
> -
> -clean:
> -	rm -f $(SOBJS) $(OBJS)
> -
> -distclean:	clean
> -	rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/altera/ep1c20/config.mk b/board/altera/ep1c20/config.mk
> deleted file mode 100644
> index dab2740..0000000
> --- a/board/altera/ep1c20/config.mk
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -#
> -# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> -# Scott McNutt <smcnutt at psyent.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -TEXT_BASE = 0x01fc0000
> -
> -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
> -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
> -
> -ifeq ($(debug),1)
> -PLATFORM_CPPFLAGS += -DDEBUG
> -endif
> diff --git a/board/altera/ep1c20/ep1c20.c b/board/altera/ep1c20/ep1c20.c
> deleted file mode 100644
> index 82900f7..0000000
> --- a/board/altera/ep1c20/ep1c20.c
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <netdev.h>
> -
> -int board_early_init_f (void)
> -{
> -	return 0;
> -}
> -
> -int checkboard (void)
> -{
> -	puts ("BOARD : Altera EP-1C20\n");
> -	return 0;
> -}
> -
> -phys_size_t initdram (int board_type)
> -{
> -	return (0);
> -}
> -
> -#ifdef CONFIG_CMD_NET
> -int board_eth_init(bd_t *bis)
> -{
> -	int rc = 0;
> -#ifdef CONFIG_SMC91111
> -	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
> -#endif
> -	return rc;
> -}
> -#endif
> diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
> deleted file mode 100644
> index acad2aa..0000000
> --- a/board/altera/ep1s10/Makefile
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -#
> -# (C) Copyright 2001-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -ifneq ($(OBJTREE),$(SRCTREE))
> -$(shell mkdir -p $(obj)../common)
> -endif
> -
> -LIB	= $(obj)lib$(BOARD).a
> -
> -COMOBJS := ../common/AMDLV065D.o ../common/epled.o
> -
> -COBJS	:= $(BOARD).o $(COMOBJS)
> -
> -SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS	:= $(addprefix $(obj),$(COBJS))
> -SOBJS	:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB):	$(obj).depend $(OBJS)
> -	$(AR) $(ARFLAGS) $@ $(OBJS)
> -
> -clean:
> -	rm -f $(SOBJS) $(OBJS)
> -
> -distclean:	clean
> -	rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/altera/ep1s10/config.mk b/board/altera/ep1s10/config.mk
> deleted file mode 100644
> index dab2740..0000000
> --- a/board/altera/ep1s10/config.mk
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -#
> -# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> -# Scott McNutt <smcnutt at psyent.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -TEXT_BASE = 0x01fc0000
> -
> -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
> -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
> -
> -ifeq ($(debug),1)
> -PLATFORM_CPPFLAGS += -DDEBUG
> -endif
> diff --git a/board/altera/ep1s10/ep1s10.c b/board/altera/ep1s10/ep1s10.c
> deleted file mode 100644
> index cf886da..0000000
> --- a/board/altera/ep1s10/ep1s10.c
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <netdev.h>
> -
> -int board_early_init_f (void)
> -{
> -	return 0;
> -}
> -
> -int checkboard (void)
> -{
> -	puts ("BOARD : Altera EP-1S10\n");
> -	return 0;
> -}
> -
> -phys_size_t initdram (int board_type)
> -{
> -	return (0);
> -}
> -
> -#ifdef CONFIG_CMD_NET
> -int board_eth_init(bd_t *bis)
> -{
> -	int rc = 0;
> -#ifdef CONFIG_SMC91111
> -	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
> -#endif
> -	return rc;
> -}
> -#endif
> diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
> deleted file mode 100644
> index acad2aa..0000000
> --- a/board/altera/ep1s40/Makefile
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -#
> -# (C) Copyright 2001-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -ifneq ($(OBJTREE),$(SRCTREE))
> -$(shell mkdir -p $(obj)../common)
> -endif
> -
> -LIB	= $(obj)lib$(BOARD).a
> -
> -COMOBJS := ../common/AMDLV065D.o ../common/epled.o
> -
> -COBJS	:= $(BOARD).o $(COMOBJS)
> -
> -SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS	:= $(addprefix $(obj),$(COBJS))
> -SOBJS	:= $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB):	$(obj).depend $(OBJS)
> -	$(AR) $(ARFLAGS) $@ $(OBJS)
> -
> -clean:
> -	rm -f $(SOBJS) $(OBJS)
> -
> -distclean:	clean
> -	rm -f $(LIB) core *.bak $(obj).depend
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/altera/ep1s40/config.mk b/board/altera/ep1s40/config.mk
> deleted file mode 100644
> index dab2740..0000000
> --- a/board/altera/ep1s40/config.mk
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -#
> -# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> -# Scott McNutt <smcnutt at psyent.com>
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -TEXT_BASE = 0x01fc0000
> -
> -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
> -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
> -
> -ifeq ($(debug),1)
> -PLATFORM_CPPFLAGS += -DDEBUG
> -endif
> diff --git a/board/altera/ep1s40/ep1s40.c b/board/altera/ep1s40/ep1s40.c
> deleted file mode 100644
> index 6395de7..0000000
> --- a/board/altera/ep1s40/ep1s40.c
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <netdev.h>
> -
> -int checkboard (void)
> -{
> -	puts ("BOARD : Altera EP-1S40\n");
> -	return 0;
> -}
> -
> -phys_size_t initdram (int board_type)
> -{
> -	return (0);
> -}
> -
> -#ifdef CONFIG_CMD_NET
> -int board_eth_init(bd_t *bis)
> -{
> -	int rc = 0;
> -#ifdef CONFIG_SMC91111
> -	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
> -#endif
> -	return rc;
> -}
> -#endif
> diff --git a/boards.cfg b/boards.cfg
> index e54673e..9b126a3 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -75,9 +75,6 @@ M5272C3		m68k	mcf52x2		m5272c3		freescale
>  EP2500		m68k	mcf52x2		ep2500		Mercury
>  purple		mips	mips
>  tb0229		mips	mips
> -EP1C20		nios2	nios2		ep1c20		altera
> -EP1S10		nios2	nios2		ep1s10		altera
> -EP1S40		nios2	nios2		ep1s40		altera
>  PCI5441		nios2	nios2		pci5441		psyent
>  PK1C20		nios2	nios2		pk1c20		psyent
>  P3G4		powerpc	74xx_7xx	evb64260
> diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
> deleted file mode 100644
> index 3920d35..0000000
> --- a/include/configs/EP1C20.h
> +++ /dev/null
> @@ -1,214 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*------------------------------------------------------------------------
> - * BOARD/CPU
> - *----------------------------------------------------------------------*/
> -#define CONFIG_EP1C20		1		/* EP1C20 board		*/
> -#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
> -
> -#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
> -#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
> -#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
> -#define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
> -
> -/*------------------------------------------------------------------------
> - * CACHE -- the following will support II/s and II/f. The II/s does not
> - * have dcache, so the cache instructions will behave as NOPs.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
> -#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
> -#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
> -#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY BASE ADDRESSES
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
> -#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
> -#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
> -#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
> -#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
> -#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY ORGANIZATION
> - *	-Monitor at top.
> - *	-The heap is placed below the monitor.
> - *	-Global data is placed below the heap.
> - *	-The stack is placed below global data (&grows down).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
> -#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
> -#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
> -
> -#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
> -#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
> -#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
> -#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
> -
> -/*------------------------------------------------------------------------
> - * FLASH (AM29LV065D)
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
> -#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
> -#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
> -#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
> -#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
> -
> -/*------------------------------------------------------------------------
> - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
> - * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
> - * reset address, no? This will keep the environment in user region
> - * of flash. NOTE: the monitor length must be multiple of sector size
> - * (which is common practice).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
> -#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
> -#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
> -#define CONFIG_ENV_ADDR	(CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
> -
> -/*------------------------------------------------------------------------
> - * CONSOLE
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ALTERA_UART		1	/* Use altera uart */
> -#if defined(CONFIG_ALTERA_JTAG_UART)
> -#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
> -#else
> -#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
> -#endif
> -
> -#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
> -#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
> -#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
> -
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
> -
> -/*------------------------------------------------------------------------
> - * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
> - * epcs device access is enabled. The base address is the epcs
> - * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
> - * The register base is currently at offset 0x600 from the memory base.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
> -
> -/*------------------------------------------------------------------------
> - * DEBUG
> - *----------------------------------------------------------------------*/
> -#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
> -
> -/*------------------------------------------------------------------------
> - * TIMEBASE --
> - *
> - * The high res timer defaults to 1 msec. Since it includes the period
> - * registers, the interrupt frequency can be reduced using TMRCNT.
> - * If the default period is acceptable, TMRCNT can be left undefined.
> - * TMRMS represents the desired mecs per tick (msecs per interrupt).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_HZ			1000	/* Always 1000 */
> -#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
> -#define CONFIG_SYS_NIOS_TMRIRQ		3	/* Timer IRQ num	*/
> -#define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
> -#define CONFIG_SYS_NIOS_TMRCNT \
> -		(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
> -
> -/*------------------------------------------------------------------------
> - * STATUS LED -- Provides a simple blinking led. For Nios2 each board
> - * must implement its own led routines -- leds are, after all,
> - * board-specific, no?
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
> -#define CONFIG_STATUS_LED			/* Enable status driver */
> -
> -#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
> -#define STATUS_LED_STATE	1		/* Blinking		*/
> -#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
> -
> -/*------------------------------------------------------------------------
> - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
> - * and really doesn't need any additional clutter. So I choose the lazy
> - * way out to avoid changes there -- define the base address to ensure
> - * cache bypass so there's no need to monkey with inx/outx macros.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
> -#define CONFIG_NET_MULTI
> -#define CONFIG_SMC91111			/* Using SMC91c111	*/
> -#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
> -#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
> -
> -#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
> -#define CONFIG_NETMASK		255.255.255.0
> -#define CONFIG_IPADDR		192.168.2.21
> -#define CONFIG_SERVERIP		192.168.2.16
> -
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_IRQ
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_SAVES
> -
> -#undef CONFIG_CMD_BOOTD
> -#undef CONFIG_CMD_CONSOLE
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_IMLS
> -#undef CONFIG_CMD_ITEST
> -#undef CONFIG_CMD_NFS
> -#undef CONFIG_CMD_SETGETDCR
> -#undef CONFIG_CMD_SOURCE
> -#undef CONFIG_CMD_XIMG
> -
> -
> -/*------------------------------------------------------------------------
> - * MISC
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
> -#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
> -#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
> -#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
> -#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
> -#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
> -#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
> -#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
> -
> -#define CONFIG_SYS_HUSH_PARSER
> -#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> -
> -#endif	/* __CONFIG_H */
> diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h
> deleted file mode 100644
> index bfbf8c1..0000000
> --- a/include/configs/EP1S10.h
> +++ /dev/null
> @@ -1,207 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*------------------------------------------------------------------------
> - * BOARD/CPU
> - *----------------------------------------------------------------------*/
> -#define CONFIG_EP1S10		1		/* EP1S10 board		*/
> -#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
> -
> -#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
> -#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
> -#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
> -
> -/*------------------------------------------------------------------------
> - * CACHE -- the following will support II/s and II/f. The II/s does not
> - * have dcache, so the cache instructions will behave as NOPs.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
> -#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
> -#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
> -#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY BASE ADDRESSES
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
> -#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
> -#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
> -#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
> -#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
> -#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB			*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY ORGANIZATION
> - *	-Monitor at top.
> - *	-The heap is placed below the monitor.
> - *	-Global data is placed below the heap.
> - *	-The stack is placed below global data (&grows down).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
> -#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
> -#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
> -
> -#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
> -#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
> -#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
> -#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
> -
> -/*------------------------------------------------------------------------
> - * FLASH (AM29LV065D)
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
> -#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
> -#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
> -#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
> -
> -/*------------------------------------------------------------------------
> - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
> - * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
> - * of flash memory. This will keep the environment in user region
> - * of flash. NOTE: the monitor length must be multiple of sector size
> - * (which is common practice).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
> -#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
> -#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
> -#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
> -
> -/*------------------------------------------------------------------------
> - * CONSOLE
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ALTERA_UART		1	/* Use altera uart */
> -#if defined(CONFIG_ALTERA_JTAG_UART)
> -#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
> -#else
> -#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
> -#endif
> -
> -#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
> -#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
> -#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
> -
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
> -
> -/*------------------------------------------------------------------------
> - * EPCS Device -- None for stratix.
> - *----------------------------------------------------------------------*/
> -#undef CONFIG_SYS_NIOS_EPCSBASE
> -
> -/*------------------------------------------------------------------------
> - * DEBUG
> - *----------------------------------------------------------------------*/
> -#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
> -
> -/*------------------------------------------------------------------------
> - * TIMEBASE --
> - *
> - * The high res timer defaults to 1 msec. Since it includes the period
> - * registers, the interrupt frequency can be reduced using TMRCNT.
> - * If the default period is acceptable, TMRCNT can be left undefined.
> - * TMRMS represents the desired mecs per tick (msecs per interrupt).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_HZ			1000	/* Always 1000 */
> -#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
> -#define CONFIG_SYS_NIOS_TMRIRQ		3	/* Timer IRQ num */
> -#define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
> -#define CONFIG_SYS_NIOS_TMRCNT \
> -		(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
> -
> -/*------------------------------------------------------------------------
> - * STATUS LED -- Provides a simple blinking led. For Nios2 each board
> - * must implement its own led routines -- since leds are board-specific.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
> -#define CONFIG_STATUS_LED			/* Enable status driver */
> -
> -#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
> -#define STATUS_LED_STATE	1		/* Blinking		*/
> -#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
> -
> -/*------------------------------------------------------------------------
> - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
> - * and really doesn't need any additional clutter. So I choose the lazy
> - * way out to avoid changes there -- define the base address to ensure
> - * cache bypass so there's no need to monkey with inx/outx macros.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
> -#define CONFIG_NET_MULTI
> -#define CONFIG_SMC91111			/* Using SMC91c111	*/
> -#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
> -#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
> -
> -#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
> -#define CONFIG_NETMASK		255.255.255.0
> -#define CONFIG_IPADDR		192.168.2.21
> -#define CONFIG_SERVERIP		192.168.2.16
> -
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -
> -/*
> - * Command line configuration.
> - */
> -#define CONFIG_CMD_BDI
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_ECHO
> -#define CONFIG_CMD_SAVEENV
> -#define CONFIG_CMD_FLASH
> -#define CONFIG_CMD_IMI
> -#define CONFIG_CMD_IRQ
> -#define CONFIG_CMD_LOADS
> -#define CONFIG_CMD_LOADB
> -#define CONFIG_CMD_MEMORY
> -#define CONFIG_CMD_MISC
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_RUN
> -#define CONFIG_CMD_SAVES
> -
> -
> -/*------------------------------------------------------------------------
> - * MISC
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
> -#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
> -#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
> -#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
> -#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
> -#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
> -#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
> -#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
> -
> -#define CONFIG_SYS_HUSH_PARSER
> -#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> -
> -#endif	/* __CONFIG_H */
> diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h
> deleted file mode 100644
> index 4d905fe..0000000
> --- a/include/configs/EP1S40.h
> +++ /dev/null
> @@ -1,207 +0,0 @@
> -/*
> - * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt at psyent.com>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*------------------------------------------------------------------------
> - * BOARD/CPU
> - *----------------------------------------------------------------------*/
> -#define CONFIG_EP1S40		1		/* EP1S40 board		*/
> -#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
> -
> -#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
> -#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
> -#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
> -
> -/*------------------------------------------------------------------------
> - * CACHE -- the following will support II/s and II/f. The II/s does not
> - * have dcache, so the cache instructions will behave as NOPs.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
> -#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
> -#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
> -#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY BASE ADDRESSES
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
> -#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
> -#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
> -#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
> -#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
> -#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB			*/
> -
> -/*------------------------------------------------------------------------
> - * MEMORY ORGANIZATION
> - *	-Monitor at top.
> - *	-The heap is placed below the monitor.
> - *	-Global data is placed below the heap.
> - *	-The stack is placed below global data (&grows down).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
> -#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
> -#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
> -
> -#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
> -#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
> -#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
> -#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
> -
> -/*------------------------------------------------------------------------
> - * FLASH (AM29LV065D)
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
> -#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
> -#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
> -#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
> -
> -/*------------------------------------------------------------------------
> - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
> - * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
> - * of flash memory. This will keep the environment in user region
> - * of flash. NOTE: the monitor length must be multiple of sector size
> - * (which is common practice).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
> -#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
> -#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
> -#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
> -
> -/*------------------------------------------------------------------------
> - * CONSOLE
> - *----------------------------------------------------------------------*/
> -#define CONFIG_ALTERA_UART		1	/* Use altera uart */
> -#if defined(CONFIG_ALTERA_JTAG_UART)
> -#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
> -#else
> -#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
> -#endif
> -
> -#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
> -#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
> -#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
> -
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
> -
> -/*------------------------------------------------------------------------
> - * EPCS Device -- None for stratix.
> - *----------------------------------------------------------------------*/
> -#undef CONFIG_SYS_NIOS_EPCSBASE
> -
> -/*------------------------------------------------------------------------
> - * DEBUG
> - *----------------------------------------------------------------------*/
> -#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
> -
> -/*------------------------------------------------------------------------
> - * TIMEBASE --
> - *
> - * The high res timer defaults to 1 msec. Since it includes the period
> - * registers, the interrupt frequency can be reduced using TMRCNT.
> - * If the default period is acceptable, TMRCNT can be left undefined.
> - * TMRMS represents the desired mecs per tick (msecs per interrupt).
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_HZ			1000	/* Always 1000 */
> -#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
> -#define CONFIG_SYS_NIOS_TMRIRQ		3	/* Timer IRQ num */
> -#define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec) */
> -#define CONFIG_SYS_NIOS_TMRCNT \
> -		(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
> -
> -/*------------------------------------------------------------------------
> - * STATUS LED -- Provides a simple blinking led. For Nios2 each board
> - * must implement its own led routines -- since leds are board-specific.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
> -#define CONFIG_STATUS_LED			/* Enable status driver */
> -
> -#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
> -#define STATUS_LED_STATE	1		/* Blinking		*/
> -#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
> -
> -/*------------------------------------------------------------------------
> - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
> - * and really doesn't need any additional clutter. So I choose the lazy
> - * way out to avoid changes there -- define the base address to ensure
> - * cache bypass so there's no need to monkey with inx/outx macros.
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
> -#define CONFIG_NET_MULTI
> -#define CONFIG_SMC91111			/* Using SMC91c111	*/
> -#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
> -#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
> -
> -#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
> -#define CONFIG_NETMASK		255.255.255.0
> -#define CONFIG_IPADDR		192.168.2.21
> -#define CONFIG_SERVERIP		192.168.2.16
> -
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -
> -/*
> - * Command line configuration.
> - */
> -#define CONFIG_CMD_BDI
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_ECHO
> -#define CONFIG_CMD_SAVEENV
> -#define CONFIG_CMD_FLASH
> -#define CONFIG_CMD_IMI
> -#define CONFIG_CMD_IRQ
> -#define CONFIG_CMD_LOADS
> -#define CONFIG_CMD_LOADB
> -#define CONFIG_CMD_MEMORY
> -#define CONFIG_CMD_MISC
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_RUN
> -#define CONFIG_CMD_SAVES
> -
> -
> -/*------------------------------------------------------------------------
> - * MISC
> - *----------------------------------------------------------------------*/
> -#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
> -#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
> -#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
> -#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
> -#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
> -#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
> -#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
> -#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
> -
> -#define CONFIG_SYS_HUSH_PARSER
> -#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> -
> -#endif	/* __CONFIG_H */


More information about the U-Boot mailing list