[U-Boot] [PATCH 2/2] MPC8308RDB: minimal support for devboard from Freescale

[Kim Phillips]

On Wed, 7 Jul 2010 20:16:13 +0400
Ilya Yanok <yanok at emcraft.com> wrote:

> This patch provides support for MPC8308RDB development board from
> Freescale with a minimal set of features:
>  Dual UART is supported
>  NOR flash is supported
>  Both TSEC Ethernet controllers are supported
>  PCI Express initialization is supported
> 
> The following features are enabled in configuration but not fully tested:
>  I2C (used to get the board revision)
>  I2C-connected RTC
>  VSC7385 switch
> 
> There is one (hopefully) minor issue: on soft reset the board sometimes
> resets twice. I've not managed to find the fix for this problem yet.
> As a workaround instruction cache can be disabled.
> 
> Signed-off-by: Ilya Yanok <yanok at emcraft.com>
> ---

Applied, after relocating the boards.cfg entry to maintain the correct
sort order.

Thanks,

Kim