[U-Boot] u-boot problem for M501 Board after u-boot-2009

[Wolfgang Denk]

Dear =?ISO-8859-9?Q?m=FCrsel_y=FDld=FDz?=,

In message <AANLkTikqS5QwfIMFZbtkSgQqrmhU3VRvENUAZ7VY4oIO at mail.gmail.com> you wrote:
>
> we have bought an IPAC-5010 Board from Artila which is based on M501sk... We
> need to change the partition table for flash which requires MTDPARTS support
> inside u-boot and which is supported after version u-boot-2009.06... I have
> downloaded many u-boot versions and realized that there were no problems
> until version u-boot-2008.10 however I could not manage to boot the board
> with versions after u-boot-2009.01...
> After flashing the board and giving power to the board, all I see is two
> dots and everything stops afterwards...
> Has anyone already managed to run u-boot-2009.06 or higher versions (which
> includes MTDPARTS support) on board M501sk ???

Sorry, I cannot help. but you can use "git bisect" to easily find out
which specific commit breaks the support for the M501 board - once we
know this, we might come up with ideas for a fix.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Monday is an awful way to spend one seventh of your life.