[U-Boot] [PATCH 3/3 v8] mmc: add generic mmc spi driver

[Mike Frysinger]

On Wednesday, May 19, 2010 00:37:47 Thomas Chou wrote:
> --- /dev/null
> +++ b/common/cmd_mmc_spi.c
> +	printf("%s: %d at %u:%u %u %u\n", mmc->name, mmc->block_dev.dev,
> +	       bus, cs, speed, mode);

this is a bit terse.  how about prefixing the hz output with like "hz:" and 
the mode with like "mode:" ?

> +U_BOOT_CMD(
> +	mmc_spi,	4,	0,	do_mmc_spi,
> +	"mmc_spi setup",
> +	"[bus:]cs [hz] [mode]	- setup mmc_spi device on given\n"
> +	"				   SPI bus and chip select\n"
> +);

there should be no newline at the end of the help string

> --- /dev/null
> +++ b/drivers/mmc/mmc_spi.c
> +struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode)
> +{
> +	struct mmc *mmc;
> +	mmc->b_max = MMC_SPI_MAX_BLOCKS;

do you have some local modification ?  i dont see b_max anywhere in 
include/mmc.h ...

unfortunately though, i tried this on my system and it doesnt seem to work.  
using a simple SPI<->MMC card, the old mmc_spi driver works on my board, but 
booting the new u-boot and running the same things shows:

bfin> mmc_spi 4 30000000 3
MMC_SPI: 0 at 0:4 30000000 3

bfin> mmc list
MMC_SPI: 0

bfin> mmcinfo
Card did not respond to voltage select!
Device: MMC_SPI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 1-bit

enabling debugging in the driver shows this:
bfin> mmcinfo
mmc_spi_init_p: clock 0
mmc_spi_set_ios: clock 0
mmc_spi_set_ios: clock 400000
mmc_spi_request:cmd0 0 0 0
mmc_spi_sendcmd:cmd0 resp6 1
mmc_spi_request:cmd8 15 1aa 0
mmc_spi_sendcmd:cmd8 resp8 ff
mmc_spi_request:cmd55 15 0 0
mmc_spi_sendcmd:cmd55 resp6 5
mmc_spi_request:cmd0 0 0 0
mmc_spi_sendcmd:cmd0 resp6 1
mmc_spi_request:cmd1 1 40300000 0
mmc_spi_sendcmd:cmd1 resp6 1
mmc_spi_request:cmd1 1 40300000 0
mmc_spi_sendcmd:cmd1 resp6 1
mmc_spi_request:cmd1 1 40300000 0
mmc_spi_sendcmd:cmd1 resp4 1
mmc_spi_request:cmd1 1 40300000 0
mmc_spi_sendcmd:cmd1 resp4 1
<these last 2 lines repeat for a while>
Card did not respond to voltage select!
...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100705/d2acad0b/attachment.pgp