[U-Boot] [PATCH v4 0/6] Add support for TI OMAP4 SDP and Panda

[Paulraj, Sandeep]

> 
> On Wed, 2010-06-30 at 14:38 -0500, Paulraj, Sandeep wrote:
> >
> > >
> > > This is version 4, which takes into account all feedback to date, and
> has
> > > been rebased on the next branch.
> > >
> > > The folowing series adds support for two boards based upon the TI
> > > OMAP4430.  The OMAP4430 is a Cortex-A9 based SOC from TI.
> <snip>
> >
> > I ran MAKEALL for ARMV7 and I got several compile errors.
> >
> > I have setup a testing branch for you(u-boot-ti/testing) with all the
> patches applied.
> >
> > Please fix and resubmit.
> 
> I'm not quite sure what went awry here, but the compile errors are
> caused by the fix you did to the mmc patch.  Perhaps due to applying the
> patches out of order in your testing branch??
> 
> In any event, the patches seem to work here applied to the current
> master/next in the original order.
> 
> Here's a pointer to my working git branch:
> 
> http://www.sakoman.com/cgi-bin/gitweb.cgi?p=u-
> boot.git;a=shortlog;h=refs/heads/omap4-next-upstream
> 
> I added your "Signed-off-by" in case you wanted to just do a pull.  But
> I am also happy to resubmit the patches if you prefer that.
> 
> Regards,
> 
> Steve
>

This is what I get. I think the recent changes in Makefile are also resulting in 2 of these.

 
a0866907 at gt9szxw61 u-boot-denx]$ CROSS_COMPILE=arm-none-linux-gnueabi- MAKEALL ARMV7
make: *** No rule to make target `am3517_evm_config'.  Stop.
make: *** [am3517_evm_config] Error 1
System not configured - see README
make: *** [all] Error 1
arm-none-linux-gnueabi-size: './u-boot': No such file
Configuring for devkit8000 board...
   text    data     bss     dec     hex filename
 193334   10164  214484  417982   660be ./u-boot
Configuring for mx51evk board...
   text    data     bss     dec     hex filename
 123610    4956  216924  345490   54592 ./u-boot
Configuring for omap3_beagle board...
   text    data     bss     dec     hex filename
 184227   10036  202432  396695   60d97 ./u-boot
Configuring for omap3_overo board...
   text    data     bss     dec     hex filename
 174655    9724  210440  394819   60643 ./u-boot
Configuring for omap3_evm board...
   text    data     bss     dec     hex filename
 203347    9584  257708  470639   72e6f ./u-boot
Configuring for omap3_pandora board...
   text    data     bss     dec     hex filename
 158134    9292  200544  367970   59d62 ./u-boot
Configuring for omap3_sdp3430 board...
   text    data     bss     dec     hex filename
 159173    5010  214832  379015   5c887 ./u-boot
Configuring for omap3_zoom1 board...
   text    data     bss     dec     hex filename
 172573    9748  201616  383937   5dbc1 ./u-boot
Configuring for omap3_zoom2 board...
   text    data     bss     dec     hex filename
 144311    8532  200396  353239   563d7 ./u-boot
Configuring for omap4_panda board...
cmd_mmc.c: In function 'do_mmc':
cmd_mmc.c:70: warning: implicit declaration of function 'mmc_set_dev'
   text    data     bss     dec     hex filename
 100853    4580  200036  305469   4a93d ./u-boot
Configuring for omap4_sdp4430 board...
cmd_mmc.c: In function 'do_mmc':
cmd_mmc.c:70: warning: implicit declaration of function 'mmc_set_dev'
   text    data     bss     dec     hex filename
 100850    4580  200036  305466   4a93a ./u-boot
make: *** No rule to make target `s5p_goni_config'.  Stop.
make: *** [s5p_goni_config] Error 1
System not configured - see README
make: *** [all] Error 1
arm-none-linux-gnueabi-size: './u-boot': No such file
Configuring for smdkc100 board...
   text    data     bss     dec     hex filename
 150434    7884  221668  379986   5cc52 ./u-boot

--------------------- SUMMARY ----------------------------
Boards compiled: 14
Boards with warnings or errors: 4 ( am3517_evm omap4_panda omap4_sdp4430 s5p_goni )