[U-Boot] Can not erase first 2 sectors on flash

Chen Wen chenpc at cs.nctu.edu.tw
Mon Jul 5 03:38:16 CEST 2010


I find that GPIO and PerCS(CS0:flash0 , CS1:flash1) share some pins on PPC
405EP.After I configure GPIO output status , everything is ok now!

Thank for your help again.

On Fri, Jun 25, 2010 at 9:20 AM, Chen Wen <chenpc at cs.nctu.edu.tw> wrote:

> Yes.
> After I verify  from 405 ep user manul again.
> "WE" means "Write Enable"
>
>
>> PerWE? with "WE" as in "Write Enable" ?
>>
>> Best regards,
>>
>> Wolfgang Denk
>>
>> --
>> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>> If there was anything that depressed him more than his own  cynicism,
>> it was that quite often it still wasn't as cynical as real life.
>>                                 - Terry Pratchett, _Guards! Guards!_
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>
>


More information about the U-Boot mailing list