[U-Boot] [PATCH v2] da830: Move common code out of da830evm.c file
Sudhakar Rajashekhara
sudhakar.raj at ti.com
Tue Jun 1 11:05:52 CEST 2010
TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137
in many aspects. So instead of repeating the same code in
multiple files, move the common code to a different file
and call those functions from the respective da830/da850
files.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj at ti.com>
Acked-by: Nick Thompson <nick.thompson at ge.com>
Acked-by: Ben Gardiner <bengardiner at nanometrics.ca>
---
Since v1:
Added irq_init declaration in misc.h to avoid compiler warning.
board/davinci/common/misc.c | 30 ++++++++++++++++++++++++++++++
board/davinci/common/misc.h | 7 +++++++
board/davinci/da830evm/da830evm.c | 28 +++++++++++-----------------
3 files changed, 48 insertions(+), 17 deletions(-)
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 25ca326..412ab50 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -41,6 +41,22 @@ int dram_init(void)
return(0);
}
+void irq_init(void)
+{
+ /*
+ * Mask all IRQs by clearing the global enable and setting
+ * the enable clear for all the 90 interrupts.
+ */
+
+ writel(0, &davinci_aintc_regs->ger);
+
+ writel(0, &davinci_aintc_regs->hier);
+
+ writel(0xffffffff, &davinci_aintc_regs->ecr1);
+ writel(0xffffffff, &davinci_aintc_regs->ecr2);
+ writel(0xffffffff, &davinci_aintc_regs->ecr3);
+}
+
#ifdef CONFIG_DRIVER_TI_EMAC
/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
@@ -186,3 +202,17 @@ int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
return 0;
}
+
+/*
+ * Enable PSC for various peripherals.
+ */
+int davinci_configure_lpsc_items(const struct lpsc_resource *item,
+ const int n_items)
+{
+ int i;
+
+ for (i = 0; i < n_items; i++)
+ lpsc_on(item[i].lpsc_no);
+
+ return 0;
+}
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
index 329c369..ee35f01 100644
--- a/board/davinci/common/misc.h
+++ b/board/davinci/common/misc.h
@@ -45,10 +45,17 @@ struct pinmux_resource {
.n_pins = ARRAY_SIZE(item) \
}
+struct lpsc_resource {
+ const int lpsc_no;
+};
+
+void irq_init(void);
int dvevm_read_mac_address(uint8_t *buf);
void dv_configure_mac_address(uint8_t *rom_enetaddr);
int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
int n_items);
+int davinci_configure_lpsc_items(const struct lpsc_resource *item,
+ int n_items);
#endif /* __MISC_H */
diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index 6385443..66aabc8 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -120,21 +120,18 @@ static const struct pinmux_resource pinmuxes[] = {
#endif
};
+static const struct lpsc_resource lpsc[] = {
+ DAVINCI_LPSC_AEMIF, /* NAND, NOR */
+ DAVINCI_LPSC_SPI0, /* Serial Flash */
+ DAVINCI_LPSC_EMAC, /* image download */
+ DAVINCI_LPSC_UART2, /* console */
+ DAVINCI_LPSC_GPIO,
+};
+
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
- /*
- * Mask all IRQs by clearing the global enable and setting
- * the enable clear for all the 90 interrupts.
- */
-
- writel(0, &davinci_aintc_regs->ger);
-
- writel(0, &davinci_aintc_regs->hier);
-
- writel(0xffffffff, &davinci_aintc_regs->ecr1);
- writel(0xffffffff, &davinci_aintc_regs->ecr2);
- writel(0xffffffff, &davinci_aintc_regs->ecr3);
+ irq_init();
#endif
#ifdef CONFIG_NAND_DAVINCI
@@ -165,11 +162,8 @@ int board_init(void)
* assuming here that the DSP bootloader has set the IOPU
* such that PSC access is available to ARM
*/
- lpsc_on(DAVINCI_LPSC_AEMIF); /* NAND, NOR */
- lpsc_on(DAVINCI_LPSC_SPI0); /* Serial Flash */
- lpsc_on(DAVINCI_LPSC_EMAC); /* image download */
- lpsc_on(DAVINCI_LPSC_UART2); /* console */
- lpsc_on(DAVINCI_LPSC_GPIO);
+ if (davinci_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
+ return 1;
/* setup the SUSPSRC for ARM to control emulation suspend */
writel(readl(&davinci_syscfg_regs->suspsrc) &
--
1.5.6
More information about the U-Boot
mailing list