[U-Boot] DRAM error when enable #define CONFIG_SPLASH_SCREEN

[Tommy Agustianto]

for enabling splash screen on my board (mpx8349) I enabled
the splash screen config in file configuration.

the binary was succesfully flashed to the board
but when I start the uboot, I got this message :

U-Boot 2009.01-dirty (Jun 09 2010 - 10:19:28) MPC83XX

Reset Status:

CPU:   e300c1, MPC8349EA, Rev: 3.0 at 396 MHz, CSB: 264 MHz
Board: MPX8349
PCI1:  32 bit, 33 MHz
SRAM:   1 MB
I2C:   ready
DRAM:  *** failed ***
### ERROR ### Please RESET the board ###


and I'd like to know, what the meaning of 'dirty' on the U-Boot title.
what more that I must configure to enabling splash screen or bitmap support?
like memory init..etc..


Thanks

--
"success isn't a destination but its a journey"

----------------------------
    Tommy Agustianto
  Electronics Engineer.
----------------------------

http://xsatria.wordpress.com