[U-Boot] [PATCH] USB OHCI support for at91sam9g45 SoC

[Sergey Matyukevich]

Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards.

Note that according to errata from Atmel, OHCI is not operational
on the first revision of at91sam9g45 chip. So this patch enables
OHCI support for later revisions.

Signed-off-by: Sergey Matyukevich <geomatsi at gmail.com>
---
 arch/arm/include/asm/arch-at91/at91_pmc.h       |   14 ++++++++++++--
 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |   13 +++++++++++++
 drivers/usb/host/ohci-at91.c                    |   13 +++++++++++++
 3 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 5b1a85d..2f9ad96 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -35,13 +35,15 @@ typedef struct at91_pmc {
 	u32	pcer;		/* 0x10 Peripheral Clock Enable Register */
 	u32	pcdr;		/* 0x14 Peripheral Clock Disable Register */
 	u32	pcsr;		/* 0x18 Peripheral Clock Status Register */
-	u32	reserved1;
+	u32	uckr;		/* 0x1C UTMI Clock Register */
 	u32	mor;		/* 0x20 Main Oscilator Register */
 	u32	mcfr;		/* 0x24 Main Clock Frequency Register */
 	u32	pllar;		/* 0x28 PLL A Register */
 	u32	pllbr;		/* 0x2C PLL B Register */
 	u32	mckr;		/* 0x30 Master Clock Register */
-	u32	reserved2[3];
+	u32	reserved1;
+	u32	usb;		/* 0x38 USB Clock Register */
+	u32	reserved2;
 	u32	pck[4];		/* 0x40 Programmable Clock Register 0 - 3 */
 	u32	reserved3[4];
 	u32	ier;		/* 0x60 Interrupt Enable Register */
@@ -199,6 +201,14 @@ typedef struct at91_pmc {
 #define			AT91_PMC_PDIV_2			(1 << 12)
 
 #ifdef CONFIG_AT91_LEGACY
+#define		AT91_PMC_USB			(AT91_PMC + 0x38)	/* USB Clock Register */
+#endif
+#define		AT91_PMC_USBS_USB_PLLA		(0x0)		/* USB Clock Input is PLLA */
+#define		AT91_PMC_USBS_USB_UPLL		(0x1)		/* USB Clock Input is UPLL */
+#define		AT91_PMC_USBDIV_8		(0x7 <<  8)	/* USB Clock divided by 8 */
+#define		AT91_PMC_USBDIV_10		(0x9 <<  8)	/* USB Clock divided by 10 */
+
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index edfb627..8fa0449 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -87,6 +87,16 @@ static void at91sam9m10g45ek_nand_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_CMD_USB
+static void at91sam9m10g45ek_usb_hw_init(void)
+{
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+
+	at91_set_gpio_output(AT91_PIN_PD1, 0);
+	at91_set_gpio_output(AT91_PIN_PD3, 0);
+}
+#endif
+
 #ifdef CONFIG_MACB
 static void at91sam9m10g45ek_macb_hw_init(void)
 {
@@ -251,6 +261,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_NAND
 	at91sam9m10g45ek_nand_hw_init();
 #endif
+#ifdef CONFIG_CMD_USB
+	at91sam9m10g45ek_usb_hw_init();
+#endif
 #ifdef CONFIG_HAS_DATAFLASH
 	at91_spi0_hw_init(1 << 0);
 #endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b2e03bc..f791df7 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -41,6 +41,14 @@ int usb_cpu_init(void)
 	writel(get_pllb_init(), &pmc->pllbr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
 		;
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	/* Enable UPLL */
+	writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU)
+		;
+
+	/* Select PLLA as input clock of OHCI */
+	writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb);
 #endif
 
 	/* Enable USB host clock. */
@@ -72,6 +80,11 @@ int usb_cpu_stop(void)
 	writel(0, &pmc->pllbr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
 		;
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	/* Disable UPLL */
+	writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
+		;
 #endif
 
 	return 0;
-- 
1.6.2.5