[U-Boot] [PATCH 2/4 v3] musb: Add Phy programming for using external Vbus

[Mike Frysinger]

On Thursday, June 10, 2010 01:50:48 Ajay Kumar Gupta wrote:
> MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support
> 500mA of power.We need to program MUSB PHY to use external Vbus
> for this purpose.
> 
> Adding 'extvbus' member in musb_config structure which should be set
> by all the boards where MUSB interface is using external Vbus supply.
> 
> Also added ULPI bus control register read/write abstraction for
> Blackfin processor as it doesn't have ULPI registers.

doesnt seem to cause problems with bf548-ezkit, so:
Acked-by: Mike Frysinger <vapier at gentoo.org>
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100610/e3059808/attachment.pgp