[U-Boot] [PATCH 2/4 v3] musb: Add Phy programming for using external Vbus

[Remy Bohmer]

Hi,

2010/6/10 Ajay Kumar Gupta <ajay.gupta at ti.com>:
> MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support
> 500mA of power.We need to program MUSB PHY to use external Vbus
> for this purpose.
>
> Adding 'extvbus' member in musb_config structure which should be set
> by all the boards where MUSB interface is using external Vbus supply.
>
> Also added ULPI bus control register read/write abstraction for
> Blackfin processor as it doesn't have ULPI registers.
>
> CC: Remy Bohmer <linux at bohmer.net>
> Signed-off-by: Ajay Kumar Gupta <ajay.gupta at ti.com>
> ---
> Changes from v2:
> Added 'return 0' in Blackfin version if ulpi read function.

Applied to u-boot-usb

Thanks.

Remy