[U-Boot] [PATCH] UBI: initialise update marker

[Kyungmin Park]

From: Peter Horton <zero at colonel-panic.org>

UBI: initialise update marker

The in kernel copy of a volume's update marker is not initialised from the
volume table. This means that volumes where an update was unfinnished will
not be treated as "forbidden to use". This is basically that the update
functionality was broken.

Signed-off-by: Peter Horton <zero at colonel-panic.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 1afc61e..4004402 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -566,6 +566,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
 		vol->alignment = be32_to_cpu(vtbl[i].alignment);
 		vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+		vol->upd_marker = vtbl[i].upd_marker;
 		vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
 					UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
 		vol->name_len = be16_to_cpu(vtbl[i].name_len);